Farm Supplies Machinery & Equipment

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

Bigfoot Trencher 600-900mm dig - 100mm Combo chain with crumber bar. - 1 5/8 inch chain - front mounted.
Suits 1.5 tonne to 4.5 tonne machines.
Tractor requires Hydrostatic / Vario Transmission.
Price inclusions: 600 to 900mm dig trencher, chain, standard frame, 2.2m hoses & couplers.
A compact yet powerful trencher fitted with a quality Digga Planetary Drive & Eaton Hydraulic Motor, 3 position-adjustable skid foot and single spoil removal auger.
Unique design gives the operator consistent digging depth, efficient spoil removal and finely crumbled spoil for effective compaction back into the trench whilst providing minimal ground disturbance to surrounding conditions and a cleaner job finish.
Multi-purpose Combination chain:
Combination of Diggatac Carbine Teeth
and Earth Teeth.
Cut through hard soil, roots, soft shale, and rocky ground.
Ideal Use:
Pipe laying for irrigation, underground power and
communications, road repairs and general construction.
Multi-purpose combination chain:
Get the best from both worlds with a multipurpose chain configuration.
Chain sizes available:
- 100mm
- 150mm
- 200mm
Features:
- Head Start Crumber System (patent pending) - start trenching with the crumber in the down position saving time by not having to get out of the machine
- Highly visible foot can be seen from the cab. No spotter required
- Adjustable skid foot features 3 preset digging depths
- Up to 900mm digging depth and 200mm digging width
- 3 different chain options - Earth, Combo, and Diggatac
- Compact, yet powerful Australian Made planetary drive
- Frame can be side shifted to dig close to permanent structures
Specifications:
- Cutting Width: 100mm
- Foot Depth Presets: 600 / 750 / 900 mm
- Hydraulic Flow: 50-95 lpm
- Motor Size: 2K Bell EATON
- Max Pressure - Do not exceed 240 bar @ 60 lpm
- Max Flow - Do not exceed 95 lpm @ 200 bar
- Max Continuous Power 25 Kw (34 hp)
- Length: 1920 mm
- Horizontal Height: 668 mm
- Width: 1212 mm
- Weight - With a 150mm Combo Chain 261 kg
See photos for more information and specifications.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA BIGFOOT TRENCHER 900MM DIG,100MM COMBO CHAIN WITH CRUMBER BAR

750MM 4 Series Auger (Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 750MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD -HYDRAULIC DRIVE

Stick rake 6ft or 1.8m.
The Daken Stick Rake is a very handy tool for cleaning up sticks and leaves around your property or reducing fire hazards.
It easily mounts to a tractors 3 point linkage with a comb that can be angled and spring steel tines.
If it is collecting too much material every second tine can be removed to allow for smaller objects to clear.
Features:
- Fits Cat 1 tractors
- Spring steel Tines
- Easy to use
- Suits Cat 1 or 2
- Weight: 100kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN STICK RAKE 6FT - 61020DC

225mm 4 Series auger (Standard conditions - Tungsten Carbide) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 225MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

Mower Combi Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER COMBI NUT M12 - REPLACEMENT FOR AGRAM

Daken D180 Grader Blades - Model D180 grader blade 180kg
The Daken D180 Grader Blades have a design that has served many years of service. Suitable for tractors up to 60hp, it features a deep reinforced mould board fitted to a reversible cutting edge that can pivot through 360 deg.
Model D180 (6') Grader Blade includes a bolt-on, reversible cutting edge, and pin adjustment offset control.
Features:
- Off-settable
- Bolt on, Reversible cutting edge
- Pivots through 360 deg
- Angle adjustment
- Galvanised
Ideal for grading, levelling, spreading top soil or gravel.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN D180 GRADER BLADES 6FT, 180KG - 83110DC

Jarrett GH 2.1m Heavy Duty Grader Blade
Features:
Robust construction
Deep, curved face (corkscrewing = max debris movement)
Reversible cutting edge
Easy side tilt adjustment
Full rotation for push and pull operations
380 x 8 mm, deep, curved face
Easy angle adjustment with 14 positions
70 mm diameter greasable spindle
6 mm, fully boxed, blade gusset
Model: GH 210
Width: 2.1 m
Blade: 380 mm
Weight: 220 kg
Spindle Diameter: 70 mm
Min Pwr: 40 hp
Linkage: Cat 1/2
Options: Scarifiers added to blade
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS GH210 HEAVY DUTY GRADER BLADE 2.1M

This heavy professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive bleed for displaced roller towards the back, starting from model 2016.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-M 300 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

Bucket Edge specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,800MM LENGTH

Daken 405 Series Slashers - 1.0m 405 Slasher.
Our long experience in slasher design continues with these Daken 405 Series Slasher which are light to medium duty slashers. Built with no under body bracing and with good rotor to body clearance they do a great cutting job.
The 405 series slashers are suitable for many cutting applications for tractors up to 50hp (40hp gearbox). They are not built to a price but fully featured to give you the best possible performance.
Features:
- Built to comply with the stringent Work Cover regulations.
- Gear box 40hp
- Gear box 1.1.93 Ratio
- Body Plate 4mm
- Adjustable skids
- Laminated Rotor
- Floating Headstock
- Can be offset left or right
- 6 two plate slip clutch
- Cat 0/1
- Hot dipped galvanised finish
- Comes with series 4 PTO shaft and Chain guards front and rear.
- Weight = 209 kg
Options:
- Level wheel suits all 405 models
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 1.0M SLASHER 405 SERIES 40HP GALVANISED - 55620DC

Rhino Epic 4125 Series Flex Wing Slasher 3.7m.
Unique to the 4125 is the independent axle arm suspension.
This reduces the stress of heavier material and higher hour workloads - which in turn leaves you with less downtime and maintenance.
Features:
Heavy-duty 3.8m (12 1/2') commercial-grade rotary cutter ideal for commercial mowing, heavy-duty agriculture use, roadsides and firebreaks, etc.
Heavy-duty wing pivot hinges engineered to take the daily stresses of the job.
4" cutting capacity ensures you can make short work of pruning's and regrowth.
Designed for tractors with 50-160HP.
Massive. replaceable skid shoes protect the underside of the slasher.
Independent axle suspension delivers a smoother ride and reduces wear and tear.
Optional Orchard Package available to protect low-lying branches from catching in the hydraulic cylinders.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RHINO EPIC 4125 SERIES FLEX WING SLASHERS 3.7M (50-160HP)

Find Machinery Attachments For Sale. Browse 1356 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

DIGGA BIGFOOT TRENCHER 900MM DIG,100MM COMBO CHAIN WITH CRUMBER BAR

DIGGA 750MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD -HYDRAULIC DRIVE

DAKEN STICK RAKE 6FT - 61020DC

DIGGA 225MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

RASSPE RADURA MOWER COMBI NUT M12 - REPLACEMENT FOR AGRAM

DAKEN D180 GRADER BLADES 6FT, 180KG - 83110DC

JARRETT IMPLEMENTS GH210 HEAVY DUTY GRADER BLADE 2.1M

MUTHING MU-M 300 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,800MM LENGTH

DAKEN 1.0M SLASHER 405 SERIES 40HP GALVANISED - 55620DC

RHINO EPIC 4125 SERIES FLEX WING SLASHERS 3.7M (50-160HP)

Farm Supplies Machinery & Equipment

Dealer Address