Farm Supplies Machinery & Equipment

Shear Grabs 1.4m - Requires front remotes.

Burders shear grab is built to cut blocks of silage neatly with minimal interference to the silage pit. 

It comes complete with forge tines on the bottom and bisalloy front teeth which is highly resistant to wear and tear. 

Pins, bushes and tines are easily replaced for maintenance purposes.

Burder quick change hooks comes as standard.

Specifications:

- HP Range: - 80+
- Approx Capacity (m3): 0.67
- Dimensions LxWxH (mm): 1400x1100x980
- Weight (kg): 438.5

BURDER SHEAR GRABS 1.4M - 80+HP RANGE

Sliding Saucer.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SLIDING SAUCER - 860MM OD - REPLACEMENT FOR PZ, DEUTZ-FAHR, VICON

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

Daken Flail mowers/mulchers are designed and built for light mulching. Suitable for light application on lawns and improved ground, standard with hammer type blades and rear roller.
Not recommended for clearing unimproved ground or medium to heavy growth.
Specifications:
Cut: 145cm
Blades: Hammer
Rear roller: yes
Skids: yes
Offset: manual
Weight: 210kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 145CM FLAIL MULCHER - 40015DC

100MM 4 Series auger (Heavy conditions-(MFT)Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PHD - Hydraulic Drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 100MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

400MM 4 Series auger up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Heavy duty hydraulic grader blade for tractors up to 100 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 100 hp
2100mm (7') wide
450kg
Reversible cutting edge
Three way adjustment by pin (tilt, angle, offset)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Industrial 450-M (manual operation)
Industrial 450-1 (hydraulic - 1 ram)
Industrial 450-2 (hydraulic - 2 ram)
Industrial 450-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARMGARD 2.1M (UP TO 100 HP) HYDRAULIC (3 RAM) INDUSTRIAL GRADER BLADE

Mower Blade.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX MOWER BLADE TWISTED - 108 X 48 X 4MM (RH) - REPLACEMENT FOR POTTINGER, FORT

Squeegee/ Yard Scraper. 3.0m

The Yard Scraper is a heavy-duty attachment designed to efficiently shift manure and muck with minimal human effort, suitable for a range of applications

Yard scrapers allow you to easily push bulk materials (such as sand, snow, coal, etc) to a point where it can be picked up. ... Yard scrapers are commonly used in the agricultural and construction industries, to name but a few.

BURDER SQUEEGEE/YARD SCRAPER STRAIGHT - 3.0M

SPAREX MOWER BLADE TWISTED - 93 X 40 X 3MM (RH) - REPLACEMENT FOR KUHN, JOHN DEERE, NEW HOLLAND, BAMFORD, KVERNELAND, PZ, KIDD

This range of mulcher is ideal for all mowing and mulching with small and compact tractors of 12 to 35 hp from cutting fine lawns to high grass or light vegetation. The MU-C mulchers display their overall versatility, their good cutting and mulching quality and their robust construction.
Features:
Manufactured from High Quality QSt/E Steel with centre mounted Cat. I Headstock for rear mounting.
Rear mounting: Gearbox with integrated over run clutch for 540 / 1000 r.p.m. (distance of the ground to P.T.O. shaft cc. 50 cm).
Front mounting: Low positioned gearbox with integrated over run clutch for 1000 r.p.m. (2000 r.p.m. possible as option) (distance of the ground to P.T.O. shaft cc. 25 cm).
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles; bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
High tempered spring steel one way protection flaps in front of the mower hood.
Skids
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Options:
2 point Linkage parts to original mower deck linkages for Front Mowers (Iseki SF 230 etc.) instead of Head Stock Cat.I (only for MU-C 100 and
MU-C 120 available).
Special Carbide wearing skids, removable (Rear mounting only).
Height adjustable rubber wheels, 360º swivel in front of the mulcher.
Hydraulic Weight Transfer MU-SOFA, for Front mounting recommended.
Mount for municipal quick-coupling triangle (installed on implement) for front mounting.
3-point trestle (Cat 1) Alpine for converting rear-mounted MU-C to front mounting for carrier vehicles, 540 rpm or 1000 rpm (MU-C 140-160)
Linkage parts for Shibaura CM 214
Modification to different RPM
Second screw-type short chopping bar system with "shark fin" design-a Muthing patent (only for front mounting)
Hood wear plate (factory mounted)
Models:
MU-C080 WW-800mm Overall width-970mm Max hp-35 Weight 140kg Flails 12
MU-C100 WW-1000mm Overall width-1170mm Max hp-35 Weight 160kg Flails 16
MU-C120 WW-1200mm Overall width-1370mm Max hp-35 Weight 180kg Flails 20
MU-C140 WW-1400mm Overall width-1570mm Max hp-35 Weight 200kg Flails 24
MU-C160 WW-1600mm Overall width-1770mm Max hp-35 Weight 220kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 160CM MULCHER SUITS UP TO 35HP MU-C160

Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE TWISTED - 126 X 48 X 4MM (RH) - REPLACEMENT FOR KUHN, TAARUP, AGRAM, KVERNELAND

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

BURDER SHEAR GRABS 1.4M - 80+HP RANGE

SPAREX SLIDING SAUCER - 860MM OD - REPLACEMENT FOR PZ, DEUTZ-FAHR, VICON

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

DAKEN 145CM FLAIL MULCHER - 40015DC

DIGGA 100MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

DIGGA 400MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

FARMGARD 2.1M (UP TO 100 HP) HYDRAULIC (3 RAM) INDUSTRIAL GRADER BLADE

SPAREX MOWER BLADE TWISTED - 108 X 48 X 4MM (RH) - REPLACEMENT FOR POTTINGER, FORT

BURDER SQUEEGEE/YARD SCRAPER STRAIGHT - 3.0M

SPAREX MOWER BLADE TWISTED - 93 X 40 X 3MM (RH) - REPLACEMENT FOR KUHN, JOHN DEERE, NEW HOLLAND, BAMFORD, KVERNELAND, PZ, KIDD

MUTHING 160CM MULCHER SUITS UP TO 35HP MU-C160

RASSPE RADURA MOWER BLADE TWISTED - 126 X 48 X 4MM (RH) - REPLACEMENT FOR KUHN, TAARUP, AGRAM, KVERNELAND

Farm Supplies Machinery & Equipment

Dealer Address