Farm Supplies Machinery & Equipment

Southern Cross 6ft Galvanised Slasher - suit 50-100hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Bare-Co components are readily available from all good machinery dealer outlets located Australia wide
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 5mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 100HP gearbox. Gearbox supplied with oil (85/140
Gear Oil).
- 3 Year Gearbox Warranty
- Bare-Co 8 inch slip clutch
- Bare-Co Series 8 PTO shaft
- Front and rear discharge deflectors
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on
material flow
- Bare-Co gearbox/slip clutch safety guarding
- Reinforced A-frame for strength and functionality
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (two-wheel kits are
recommended for the 6ft slasher)
Specifications:
- Recommended Tractor (HP) - 50-100
- Cutting Width (mm) - 1750
- Overall Width (mm) - 1870
- Cutting Height (mm) - 42-167
- Number of Blades - 2
- Blade Size (mm) - Bare-Co B6002
- Blade Tip Speed (m/s max.) - 90
- Deck Thickness (mm) - 5.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/100HP
- Bare-Co 8 inch 100HP slipclutch & series 8 PTO shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter bar
- Optional Wheel Kit(s) - Twin kit available
- Offset - Left & right
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT GALVANISED SLASHER, SUIT 50-100HP

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 200 MULCHER (35-90HP) - FRONT OR REAR

Muthing Bolt with nut to suit:
- Original "M" scoop flail (MU1)
- Original "M" carbide shackle flail short (MU5)
- "M" carbide shackle flail short (new model - MU50)
- Original "M" Carbide shackle flail long (MU4)
- Scarifying blade (18430)
Options:
Nut: MU980201
MU1 - Original "M" Scoop Flail
MU3 - 2 x Spacer
MU5 - Original "M" carbide shackle flail
MU50 - "M" carbide shackle flail short (new model)
MU0801031 - Original "M" Shackle Short
MU4 - Original "M" Carbide shackle flail long
MU1101011 - Original "M" shackle long
18430 - Scarifying blade
18894 - Spacer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING BOLT WITH NUT (ONLY) TO SUIT MU1, MU5, MU50, MU4 & 18430

Tine Bush specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HEAVY DUTY LOADER TINE BUSH - 50 X 110MM (CONUS 1) - BUSH TYPE 2

Bush.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BUSH - 16.5MM ID, 25MM OD - REPLACEMENT FOR AGRIMASTER

Shackle.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SHACKLE - 16.5MM HOLE DIA, 47MM WIDTH

225mm - 3 Series Auger up to 5T for 3 point linkage. Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 225MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

Implement Adaptor specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX IMPLEMENT ADAPTOR FROM EURO NORM TO 3PL (CAT 2) 1,128MM X 610MM

ASM Mulcher Hydraulic Side Shift with wheels.- 200cm
Universal low clearance mulcher suitable for roadside grass maintenance, orchard and vineyard pruning's.
Features:
- European Gearbox (50HP)
- SPBX Section American V Belts
- Cat 1 Clevis Hitch 3PL
- Can be front or rear mounted on the tractor.
- Hydraulic side shift standard.
- Can be built LH or RH offset.
- 6 series European drive shaft with integral clutch
- Roller or castor wheels standard.
- 4 X SPBX section belt rotor drive on large diameter pulleys for optimum blade speed.
- Hammers fitted standard, Y flail option.
- 4mm thick plate monocoque body construction.
- Chain top link.
Options:
- rear rubber flap
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM MULCHER ASM HYDRAULIC SIDE SHIFT WITH WHEELS 200CM (50HP) - ASM/200W

Painted Agrifarm ACS Slasher. Extra heavy duty slasher for contractors, local government bodies and farm clearing work.
Note: Picture shows galvanised model.
Features:
- 150cm cutting width
- Italian Manufactured High Ration Gearboxes (125HP)
- 8 series drive shaft with 4 plate friction clutch.
- High ratio gearbox produces optimum blade tip speed.
- Heavily reinforced 5mm body, galvanizing option.
- Swing back blades
- 300mm underbody clearance to handle the heaviest crop.
- Floating headstock slasher follows ground profile.
- Laminated Bisalloy blade beam offset suction lift blades.
- Front & rear chain curtains standard
- Cat 1 & 2 Clevis Hitch 3PL
- Pivoting RHS Tube Headstock with Chain Backstays (150,180)
Optional Extras:
- Slasher galvanised (4WACS150-G)
- Chain guard rear
- Height wheels - single
- Height wheels - twin
- Roller kit
- Support stand Complete
- Support stand Mtg tube only
- Body corner guards
- Council rear sign holder
- Council knapsack holder
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 150CM ROTARY SLASHER (125HP) - ACS SERIES

375mm 4 Series Auger (Heavy conditions - (MFT) Multi Facet Tungsten-Hard Ground) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger, drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 375MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

900mm 4 Series auger (Standard conditions - Tungsten Carbide) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 900MM AUGER (STANDARD - TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SOUTHERN CROSS AG MACHINERY 6FT GALVANISED SLASHER, SUIT 50-100HP

MUTHING MU-H VARIO 200 MULCHER (35-90HP) - FRONT OR REAR

MUTHING BOLT WITH NUT (ONLY) TO SUIT MU1, MU5, MU50, MU4 & 18430

SPAREX HEAVY DUTY LOADER TINE BUSH - 50 X 110MM (CONUS 1) - BUSH TYPE 2

SPAREX BUSH - 16.5MM ID, 25MM OD - REPLACEMENT FOR AGRIMASTER

SPAREX SHACKLE - 16.5MM HOLE DIA, 47MM WIDTH

DIGGA 225MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

SPAREX IMPLEMENT ADAPTOR FROM EURO NORM TO 3PL (CAT 2) 1,128MM X 610MM

AGRIFARM MULCHER ASM HYDRAULIC SIDE SHIFT WITH WHEELS 200CM (50HP) - ASM/200W

AGRIFARM PAINTED 150CM ROTARY SLASHER (125HP) - ACS SERIES

DIGGA 375MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

DIGGA 900MM AUGER (STANDARD - TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

Farm Supplies Machinery & Equipment

Dealer Address