Farm Supplies Machinery & Equipment

Southern Cross 5ft Slasher - 30-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Optional Wheel Kit(s) - Twin Kit available
Features:
- Built for Australian conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.5mm deck
- Height adjustable skids with five different cuttings heights
- 45HP Bare-Co gearbox
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chains mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (one wheel kit is recommended for the 5ft slasher)
Specifications:
- Recommended Tractor (HP) - 30-45
- Cutting Width (mm) - 1470
- Overall Width (mm) - 1650
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 3.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 323kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

450mm - 3 Series Auger up to 5T for 3 point linkage. Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 450MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

BURDER TELEHANDLER BALE GRAB 5-6FT

Features:
Heavy duty 75mm x 75mm angle bottom linkage mounts
75mm x 50mm RHS Main frame
Double frame added for added strength
Anti-kick bar fitted for greater strength, greater production for tines and minimise tine breakage
3/4in or 1in special spring steel round curved tines
Tines spaced 6in apart other spacing available on request
Tines float independently approx 90mm max vertical movement
Rakes sit higher, approx 650mm clearance
allowing more debris to be collected.
Farm Aid heavy duty stick rakes are entirely Australian products, designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID STICK RAKES (HEAVY DUTY) - 8FT - FARM AID - FA202

750mm 4 Series Auger (Heavy conditions - (MFT) Multi Facet Tungsten-Hard Ground) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger, drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 750MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

Loader Tine specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE - STRAIGHT, 1,250MM LENGTH (SQUARE)

Galvanised ACS-STS Series Rotary Slasher. Side Throw Model. Available in AHS and ACS series Slashers.
Features:
- 210cm cutting width
- Italian manufactured high ratio gearbox (70HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

900mm 4 Series Auger up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 900MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

Adjustable Pallet Forks 2000 Series- 20-30 HP range.

The adjustable pallet fork allows the operator to adjust the width to suit the situation. 

Pallet tines can change position by simply removing the locking pin.

The pallet forks are manufactured to suit most loaders as well as customised to suit individual loaders. 

The fork tines are extremely durable as it is made of heavy duty forged steel tines.

Burder quick change hooks are standard and other mounts are available upon request.

Specifications:

- Hp Range: 20-30
- Rated Capacity (kg): 300	
- Dimensions LxWxH (mm): 700x1027x500	
- Weight (kg): 80

BURDER ADJUSTABLE PALLET FORKS 2000 SERIES 20-30HP RANGE

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE FLAT - 94 X 40 X 3MM (RH & LH) - REPLACEMENT FOR KUHN, NEW HOLLAND

HD Log and Trash Grab Profile Cut tine. Independent Double Grab.
Specifications:
- Weight: 380kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER HD LOG/TRASH DOUBLE GRAB

The Nobili TLP mulchers are suited to low horsepower tractors up to 30HP for grass with cutting height maintained by the rear roller.
Features:
Suggested Use: Grass mowing only.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Control: Fixed headstock.
Attachment: Cat. I and II three point linkage.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
HP: 25-60
Y Blades Standard
Working Width (mm): 1600
Weight (kg): 1205
Dimensions WxHxD (mm): 1750W 460H 760D
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

Find Machinery Attachments For Sale. Browse 1374 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

DIGGA 450MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

BURDER TELEHANDLER BALE GRAB 5-6FT

FARM-AID STICK RAKES (HEAVY DUTY) - 8FT - FARM AID - FA202

DIGGA 750MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

SHW LOADER TINE - STRAIGHT, 1,250MM LENGTH (SQUARE)

AGRIFARM GALVANISED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

DIGGA 900MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

BURDER ADJUSTABLE PALLET FORKS 2000 SERIES 20-30HP RANGE

RASSPE RADURA MOWER BLADE FLAT - 94 X 40 X 3MM (RH & LH) - REPLACEMENT FOR KUHN, NEW HOLLAND

BURDER TELEHANDLER HD LOG/TRASH DOUBLE GRAB

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

Farm Supplies Machinery & Equipment

Dealer Address