Farm Supplies Machinery & Equipment

Heavy duty hydraulic grader blade for tractors up to 130 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 130 hp
2700mm (9') wide
600kg
Reversible cutting edge
Full three way adjustment (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 600-M (manual operation)
Contractor 600-1 (hydraulic - 1 ram)
Contractor 600-2 (hydraulic - 2 ram)
Contractor 600-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (2 RAM) CONTRACTOR GRADER BLADE

Inner Tube specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX INNER TUBE - 3.5 / 4 - 8MM, TR87 ANGLED VALVE, SUITABLE FOR AIR

This heavy duty professional range for tractors of up to 120 hp with side shift and front (or rear) mounting is the entry level to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-L Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat.
I + II for Front or Rear mounting with mechanical side shift;
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar.
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standard
Carbide wearing skids (removable).
Adjustable Vario Intake Bar - cutting bar.
Options:
Hydraulic side shift (56cm lifting range).
Shock absorbing linkage springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modifications of r.p.m /rotation direction.
Rotor with triple Y-blades (additional charge).
Rotor with m shackle flails (additional charge).
Scraper bar for displaced support roller MU-L Vario.
Second Patented removable shredding bar system "Shark Fin".
Hood wear plate (Factory mounted).
Model:
MU-L 180 1800mm 120 HP WW 1800mm Overall width 1970mm Weight 530kg Flails 16
MU-L 200 2000mm 120 HP WW 2000mm Overall width 2170mm Weight 570kg Flails 16
MU-L 220 2200mm 120 HP WW 2200mm Overall width 2370mm Weight 610kg Flails 18
MU-L 250 2500mm 120 HP WW 2500mm Overall width 2670mm Weight 670kg Flails 22
MU-L 280 2800mm 120 HP WW 2800mm Overall width 2970mm Weight 790kg Flails 24
As shown in illustration - MUL 180 280: 56 cm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-L VARIO 220 MULCHER (SUITS 45-120HP) - FRONT OR REAR MOUNT

Bucket Tooth specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BUCKET TOOTH, CENTRE TOOTH - REPLACEMENT FOR JCB

The MU-FM professional flail mower with linkages for various outfront mowers was developed especially for this purpose.
The two point linkage in connection with the front wheels means that even on uneven land the mulcher can be driven precisely, close to the ground and with a uniform cutting height by virtue of the continuously variable height adjustment of the support roller.
Features:
Manufactured from High Quality QSt/E Steel for Front mounting onto professional Front Mowers with 2 point linkage.
Linkage designed for high lift to clear kerbs.
Gearbox mounted to the rear of the hood complete with integrated over run clutch for 2500 r.p.m.
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
Easy to use variable height adjustment.
Wearing skids.
High tempered spring steel one way protection flaps in front of the mower.
Optimised distance between the outer rotor circle and the roller as well as the linkage parts with wide swivelling range guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and a removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Height Adjustable support wheels, 360 deg swivel in front of flail
Options:
Implement triangle for Tora GM 360 with Quick-Attached-System, left side 1"Z15-additional charge
Headstock with municipal coupling triangle - additional charge
Headstock with A frame Cat.1 N-additional charge
PTO shaft GE 2105 for Grillo,25x22 14-spline-additional charge
Second Patented removable shredding bar system: "Shark Fin"
Hood wear plate (factory mounted)
Thatch blades
Vertically adjustable rear support wheels, 360 deg swivelling, instead of support roller (only MU-FM 140-160) Additional Charge
Models:
MU-FM 140-31-1-2 WW 1400mm Overall width 1650mm Max hp 40 Weight 220kg Flails 24
MU-FM 160-31-1-2 WW 1600mm Overall width 1850mm Max hp 40 Weight 240kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 160CM MULCHER - SUITS < 40HP - MU-FM160-31-1-2

This rear mounting hydraulic folding six metre mulcher is German engineering at its best.
Ideal for both pasture and stubble management along with general wide area mulching.
Manufactured from high quality QSt/E Steel with Headstock Cat. II & III for rear mounting.
Recommended for tractors 140-250HP.
Four rubber trailing wheels with 360° swivel.
Features:
Manufactured from High Quality Qst/E Steel with Headstock Cat.II & III for rear mounting.
Four rubber wheels, 360° swivel, height adjustable, 23X10.50-12.
Gearbox with integrated over run clutch for 1000 r.p.m.
Automatic belt tensioning.
Hood wear plates.
Hydraulic transport safety lock at an angle of 90°.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Well balanced spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Patented removable shredding bar System : Shark Fin.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the wheels guarantees perfect contour following and an even quality of cut.
Two single acting spool valves requested.
PTO shaft with cap bottom lubrication.
Warning signs and lights (LED mounted).
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Scrapper rail for MU-M/F 600 Vario (2 units must be ordered for entire working width).
Additional protection device for heavy duty work in extremely stony conditions.
Second screw-type short chopping bar system: "shark-fin design" - A Muthing patent (2 units must be ordered for entire working width).
Hydraulic powered central strip mulcher.
Operating hours counter with sensor, time recording via angular momentum.
Quick-hitch adapter, Cat. 3.
Model:
MU-M600 41.1 (4 Wheels) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
MU-M600 41.2 (Support Rollers) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

Log Bucket 6000 series (with bolt on removable sides) - 1.65m.

The log bucket is designed for transporting logs and other similar objects.

Specifications:

- Width (m): 1.65m 	
- HP Range: 40-60	
- Struck Capacity (m3): 0.27
- Rated Capacity (m3): 0.34
- Dimensions LxWxH (mm): 1710x690x560
- Weight (kg): 160

BURDER LOG BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

200MM 4 Series auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 200MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Muthing Outside Blades - For grass and wood.
Includes 2 x "M" Back to Back Blades
"M" 3 Back to Back Flail Suits the Following Muthing Models (with optional Rotor Incorporating 3 Back to Back Flails):
MU-ECOTOP
MU-H
MU-L
MU-M
MU-MAXI
Options for this blade:
MU000558 1 x "M" Back to Back Blade (Inside)
MU980416 Bolt with Nut to suit "M" 3 Back to Back Flail
MU000559 Muthing Spacer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 2X MUTHING "M" OUTSIDE BLADES (ONLY) - FOR 3 BACK TO BACK FLAIL

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Can be offset in seconds to work outside the tractor wheel to the left or right hand side.
Choice of 5 positions each way to a maximum of 600mm offset.
Alternative holes for the lower linkage arms, provide ample tilt for V-draining.
Provides 30 degree tilt each way.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 6ft
Mouldboard Thickness: 8mm
Mouldboard Height: 450mm
Tractor HP: 30-60
No of Offset Positions: 9
Weight: 200kg
Options:
0009 Grader Blade Wheel Kit.
0419 Boxed ends suit Medium Duty model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) - 0005

AHM Mulcher 160CM - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
- Wheat, Maize, Sorghum, Rice and Cotton stubble. - Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
- Prunings: Macadamia, Grapes, Banana plants & Avocados
- The Forestry model is suitable for scrub clearing, forest trails and under powerline regrowth control. These models are also fitted with a heavy duty Rotor and additional body panels
Features:
- 50HP
- Excavator Mount
- Double skin body construction
- Cast hammers pivoting on hardened bushes
- SPBX Section American V Belts
- Taperlock Rotor Bearings 55mm capacity
- 220mm diameter Rotor Tube
- Suitable for 12-20 ton excavators
- Requires minimum 100lt/min flow, minimum 200 bar pressure.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM EXCAVATOR MULCHER AHM HYDRAULIC 160CM (100+LPM)

Mower Blade Holder.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX MOWER BLADE HOLDER - 180MM LENGTH, 125MM WIDTH - REPLACEMENT FOR PZ

Find Machinery Attachments For Sale. Browse 1377 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (2 RAM) CONTRACTOR GRADER BLADE

SPAREX INNER TUBE - 3.5 / 4 - 8MM, TR87 ANGLED VALVE, SUITABLE FOR AIR

MUTHING MU-L VARIO 220 MULCHER (SUITS 45-120HP) - FRONT OR REAR MOUNT

SPAREX BUCKET TOOTH, CENTRE TOOTH - REPLACEMENT FOR JCB

MUTHING 160CM MULCHER - SUITS < 40HP - MU-FM160-31-1-2

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

BURDER LOG BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

DIGGA 200MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

SOUTHERN CROSS AG MACHINERY 2X MUTHING "M" OUTSIDE BLADES (ONLY) - FOR 3 BACK TO BACK FLAIL

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) - 0005

AGRIFARM EXCAVATOR MULCHER AHM HYDRAULIC 160CM (100+LPM)

SPAREX MOWER BLADE HOLDER - 180MM LENGTH, 125MM WIDTH - REPLACEMENT FOR PZ

Farm Supplies Machinery & Equipment

Dealer Address