Farm Supplies Machinery & Equipment

500mm - 3 Series Auger up to 5T for 3 point linkage. Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

Medium duty left hand offset verge mulcher, for tractors 55 to 110hp. Ideal for general mowing and mulching on verges, banks and roadsides.
Specifications:
Actual Width: 195cm
Working Width: 175cm
Required HP: 55hp
Weight: 780kg
No of Blades: 16
Features:
110hp rated gearbox
Left hand offset
540rpm PTO (2278rpm-tip speed 52.5m/s)
4 belt transmission
Category 2 linkage
Shock absorber with pressure relief valve fitting onto side-shift arm
Front and upper counter knives
Rear roller
Side-shift & tilt (angle) adjustment by hydraulic rams
Gearbox with freewheel safety device
Side skids
Hammer flails
Double skinned chassis
Wide angle driveshaft
Models:
PEGASUS 175 175cm Working width 55hp 780kg 16 Blades
PEGASUS 200 200cm Working width 65hp 810kg 18 Blades
PEGASUS 225 225cm Working width 75hp 860kg 20 Blades
PEGASUS 250 250cm Working width 85hp 915kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (55HP) PEGASUS SWING ARM SIDE MULCHER

This 5ft (1.5m) rake is ideal for fitting on most ATVs, RTVs or even ride on lawn mowers. Great for cleaning up sticks, branches and general rubbish around the block. Its 88kg weight is easy to handle but still provides enough weight to rake effectively.

JOHN BERENDS LANDSCAPE RAKE 5FT (1.5M) SUIT ATVS - 0379

Pre Brushed Tube specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX CONUS 1 PRE BUSHED TUBE (4 HOLES)

Muthing Outside Blades - For grass and wood.
Includes 2 x "M" Back to Back Blades
"M" 3 Back to Back Flail Suits the Following Muthing Models (with optional Rotor Incorporating 3 Back to Back Flails):
MU-ECOTOP
MU-H
MU-L
MU-M
MU-MAXI
Options for this blade:
MU000558 1 x "M" Back to Back Blade (Inside)
MU980416 Bolt with Nut to suit "M" 3 Back to Back Flail
MU000559 Muthing Spacer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 2X MUTHING "M" OUTSIDE BLADES (ONLY) - FOR 3 BACK TO BACK FLAIL

500mm - 3 Series Auger up to 5T for 3 point linkage. Standard conditions - Tungsten Carbide.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

Garfield 5 metre Carry-all Ejection Scraper.
When you need to move a lot of material, the Garfield Ejection Scraper is the right machine for the job.
The Garfield Ejection Scraper comes standard with hydraulically-operated rear gates using forward-forced straight ejection to achieve a smooth, even spread of material at the desired depth.
The rear hinge design allows the bowl to set on the ground when loading, this makes loading require less horsepower than a traditional front hinge scraper.
Optional Laser/GPS mount, as well as tandem hitch, are available for all models.
The Garfield Ejection scraper is available in 4 sizes from 5 to 13 cubic yard capacity.
The Garfield Ejection Scraper Is the perfect tool for:
- Site prep
- Ditches
- Building ponds and dams
- Lowering large areas
- Filling large areas
- Terraces
Features:
- 26 ply high flotation tires.
- Lockout pin for transportation.
- Covered ejector cylinder.
- Heavy 4" ball allows machine to
operate on.
- Un-even terrain.
- GPS and laser compatible.
- Heavy duty dolly reduces load on
tractor and provides more flotation.
- Swivel hitch allows manoeuvrability on
rough terrain.
Specifications:
- Heaped capacity m³: 4.21
- Struck capacity m³: 3.05
- Width of cut: 1.83m
- Overall width: 2.03m
- Overall length: 7.01m
- Overall height: 2.03m
- Ground clearance: .025m
- Front tire size: 11x15
- Rear tire size: 12.5x16
- Required HP: 80-150
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 5M WIDE GARFIELD CARRY-ALL EJECTION SCRAPER

Heavy duty hydraulic grader blade for tractors up to 130 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 130 hp
2700mm (9') wide
600kg
Reversible cutting edge
Full three way adjustment (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 600-M (manual operation)
Contractor 600-1 (hydraulic - 1 ram)
Contractor 600-2 (hydraulic - 2 ram)
Contractor 600-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (1 RAM) CONTRACTOR GRADER BLADE

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE STEPPED - 107 X 50 X 4MM (RH & LH) - REPLACEMENT FOR MAXAM

Muthing Bolt with nut to suit:
- Original "M" scoop flail (MU1)
- Original "M" carbide shackle flail short (MU5)
- "M" carbide shackle flail short (new model - MU50)
- Original "M" Carbide shackle flail long (MU4)
- Scarifying blade (18430)
Options:
Nut: MU980201
MU1 - Original "M" Scoop Flail
MU3 - 2 x Spacer
MU5 - Original "M" carbide shackle flail
MU50 - "M" carbide shackle flail short (new model)
MU0801031 - Original "M" Shackle Short
MU4 - Original "M" Carbide shackle flail long
MU1101011 - Original "M" shackle long
18430 - Scarifying blade
18894 - Spacer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING BOLT WITH NUT (ONLY) TO SUIT MU1, MU5, MU50, MU4 & 18430

Bolt with nut to suit original "M" hammer flail "farmer" (MG00350-A).
Options for this bolt and nut:
MG00350-A Original "M" Hammer Flail "Farmer"
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING BOLT WITH NUT (ONLY) TO SUIT "M" HAMMER FLAIL "FARMER"

400MM 4 Series auger up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Find Machinery Attachments For Sale. Browse 1377 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

DIGGA 500MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

CELLI 1.75M (55HP) PEGASUS SWING ARM SIDE MULCHER

JOHN BERENDS LANDSCAPE RAKE 5FT (1.5M) SUIT ATVS - 0379

SPAREX CONUS 1 PRE BUSHED TUBE (4 HOLES)

SOUTHERN CROSS AG MACHINERY 2X MUTHING "M" OUTSIDE BLADES (ONLY) - FOR 3 BACK TO BACK FLAIL

DIGGA 500MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

BURDER 5M WIDE GARFIELD CARRY-ALL EJECTION SCRAPER

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (1 RAM) CONTRACTOR GRADER BLADE

RASSPE RADURA MOWER BLADE STEPPED - 107 X 50 X 4MM (RH & LH) - REPLACEMENT FOR MAXAM

MUTHING BOLT WITH NUT (ONLY) TO SUIT MU1, MU5, MU50, MU4 & 18430

MUTHING BOLT WITH NUT (ONLY) TO SUIT "M" HAMMER FLAIL "FARMER"

DIGGA 400MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Farm Supplies Machinery & Equipment

Dealer Address