Farm Supplies Machinery & Equipment

Daken D180 Grader Blades - Model D180 grader blade 180kg
The Daken D180 Grader Blades have a design that has served many years of service. Suitable for tractors up to 60hp, it features a deep reinforced mould board fitted to a reversible cutting edge that can pivot through 360 deg.
Model D180 (6') Grader Blade includes a bolt-on, reversible cutting edge, and pin adjustment offset control.
Features:
- Off-settable
- Bolt on, Reversible cutting edge
- Pivots through 360 deg
- Angle adjustment
- Galvanised
Ideal for grading, levelling, spreading top soil or gravel.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN D180 GRADER BLADES 6FT, 180KG - 83110DC

1.7m 4 in 1 Bucket - Made in New Zealand.
The Rata 4 in 1 bucket range consists of 4 width models to suit a range of different size machines. These are from 50 horse power machines up to 3 ton lift capacity telehandlers / loaders.
4 in 1 buckets enable you to use one tool to dig, blade, pull back and clamp up.
(50hp +) Required.
Hydraulic rams on the Rata 4 in 1 Buckets are isolated from the working area towards the rear of the bucket. Some sizes feature enclosed rams such as shown in some pictures.
Bucket teeth are an optional extra for 4 in 1 Buckets. Bucket teeth can be particularly handy where digging in tough ground is desired.
Rata Bucket teeth are also easily replaceable.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 1.7M 4 IN 1 BUCKET (50HP +)

The Nobili BK series mulcher is a heavy duty multi-purpose machine, fitted with maintenance free bearings. The BK is fitted with an opening tailboard and a mulching bar is fitted to produce a fine mulch.
Suggested Use: Grass, stubble, pasture topping, vegetable topping, regrowth and green pruning's to 90mm diameter.
Construction: High profile body, opening tailboard and one mulching bar.
Control: Two position fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Category II three point linkage, 2 position manual fixed headstock with floating top link.
Height Control: Skids.
Specifications:
Connection Type: Linkage
Tractor HP: 90-160 HP
Working Width (mm): 2792
Blades (Y with Straight): 64/32
Product Weight (kg): 1100
Width / Depth / Height (mm): 2998 / 1505 / 784
Options:
Full Width Roller
Semi Swivel Wheels
Wear Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI BK MULTI-PURPOSE MULCHERS 2.8M - BK280/012, 90-160HP

The Nobili BK series mulcher is a heavy duty multi-purpose machine, fitted with maintenance free bearings. The BK is fitted with an opening tailboard and a mulching bar is fitted to produce a fine mulch.
Features:
Suggested Use: Grass, stubble, pasture topping, vegetable topping, regrowth and green pruning's to 90mm diameter.
Construction: High profile body, opening tailboard and one mulching bar.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Category II three point linkage, with floating top link.
Height Control: Rear wheels.
Specifications:
Connection Type: Linkage
Tractor HP: 110-175 HP
Blades (Y with Straight): 72/36
Working Width (mm): 3205
Product Weight (kg): 1410
Width / Depth / Height (mm): 3467 / 1560 / 827
Options:
Full Width Roller
Semi Swivel Wheels Standard
Wear Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BK MULTI-PURPOSE MULCHERS 3.2M - BK320/012- Y FLAILS- 70-125HP

Made in Australia
Features:
- 12 mm AR36 high grade tynes
- 70 mm spacing's
- Front lip to hold rocks & branches
- Standard Tooth Bar Lip style
- Suits up to 100 hp
- Overall width = 1,830 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH ROCK SIEVE BUCKET (1.8M)

250mm 4 Series auger (Standard conditions - Tungsten Carbide) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 250MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

150MM DR4 Series Auger (Dedicated rock - Rotating Picks) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
DR4 dedicated rock
DR augers feature rotating rock picks for drilling from soft fracturable rock to very hard rock. Featuring short flighting, the design encourages regular spoil removal, allowing cool air to enter the hole, and facilitate regular tooth inspection. Watch our rock auger overview video.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Dedicated rock
- Standard Hub: 65mm Round
- Hub Options: 75mm square
- Overall Length: 1200 mm
- Flights (Lead): 12 mm
- Flights (Carry): 8 mm
- Teeth: 19 mm Rotating Rock Pick
- Pilot: DRP-19-15
Optimum Drilling Speeds - RPM:
- Earth: not recommended
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: 10-25
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 150MM AUGER (DEDICATED ROCK) FOR RAMDRILL - HYDRAULIC DRIVE

The RM-P 480 and 610 models are ideal to shred grass, vegetable residues, maize, straw and stalks in general. Also suitable for pasture topping and the upkeep of non-seeded areas.
Multi-purpose and sturdy mulchers conceived and recommended for large farms and contractors as well. The rotors with 8 rows are equipped with moving and interchangeable knives of various sizes and shapes; the gearbox is with overrunning clutch.
This series consists of two joint-connected RM mulchers, placed side by side in working condition, that can be folded for an easy road transport.
Available in two models with working widths of 4817 and 6077 mm.
Specifications:
Tractor Connection: Linkage (Cat III + IV Quick Hitch)
Connecting position: Rear
Engine speed rpm: 1000
Tractor horse power HP: 180-350, KW: 132-257
Y Blade & Straight Blade: 192 + 8 high tensile
Working Width: 6077mm
Overall Width: 6440mm
Weight: 3200kg
Features:
Suggested Use: Grass and green pruning's up to 75mm diameter.
Construction: High profile wear plate, adjustable tailboard and two mulching bars.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys. Dual drive with 5 rows of blades in special formation.
Attachment: Cat. III + IV quick hitch, three point linkage.
Height Control: Four rear wheels.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 6M RM610P MULCHER (SUIT 180-350HP)

Sliding Tine Fork - 100+ HP range.
The sliding tine pallet fork allows the pallet tines to slide effortlessly across the bar and can be adjusted indefinitely to suit requirements.
The safety locking system is introduced to ensure maximum safety during operation.
The pallet forks are manufactured to suit most loaders as well as customised to suit individual loaders.
The fork tines are extremely durable as it is made of heavy duty forged steel tines.
Burder quick change hooks are standard and other mounts are available upon request.
Specifications:
- Tines: Sliding tine Floating
- Hp Range:100+
- Rated Capacity (kg): 1500
- Dimensions LxWxH (mm): 1200 x 1255 x 750
- Weight (kg): 270
Options:
- Top Grab
- Hydraulic Side Shift for 1 Tine
Burder quick change hooks are standard and other mounts are available upon request.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER SLIDING TINE FORKS (100+ HP) - 1500KG CAPACITY

Mower Blade.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX MOWER BLADE FLAT - 96 X 40 X 3MM (RH & LH) - REPLACEMENT FOR DEUTZ-FAHR, CLAAS, FELLA, NIEMEYER, PZ, POTTINGER, KRONE

XL Square Bale Forks 1100mm
Features:
- 80+hp range
- Removable tines
- 4 x Conus 1 tines (1100mm square tines with pointed end)
- 1100mm x 1800mm x 1800mm (LxWxH)
- Weight 220kg
Options:
- 3 metre fixed high back option
- Extra Conus I tine and sleeve
- Extra Conus II tine and sleeve
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER XL SQUARE BALE FORKS (4 CONUS I TINES) (80+ HP) - 1100MM

A rugged, extra tough slasher built to take real punishment from continuous work ideal for contractors.
Features:
Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular cross members where it counts.
Adjustable skids. Contractor option fitted with additional runner for wear.
Contractor option has hot dipped galvanised body.
Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
Unlimited HP oil lubricated Italian gearbox with unbreakable 90mm output shaft with 5 Year Manufacturers Warranty.
Twisted and stepped 75 x 16mm Boron slasher blades create an updraft effect which lifts the grass flattened by the tractor wheels. All bushes are thoroughly hardened.
Made in Australia.
The blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
Hardened and tempered spring steel rotor blade assembly. Bolt head protection allows easy changeover of blades.
Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
Front and rear chain kits are standard with easy to replace chain pieces.
Cat 2 three point linkage as standard.
Specifications:
0085 Warrior 5ft 10in with adjustable skids
Cutting Width 1750 mm
Overall Width 1960 mm
Tractor HP 100+
Cutting Height 25-100mm
Weight 651 kg
Galvanised Body
Dual Solid Rubber Wheelkits
Additional Skid Wear Runners
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS WARRIOR EHD CONTRACTOR SLASHERS 1.8M - 0085, 100+HP

Find Machinery Attachments For Sale. Browse 1320 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

DAKEN D180 GRADER BLADES 6FT, 180KG - 83110DC

RATA 1.7M 4 IN 1 BUCKET (50HP +)

NOBILI BK MULTI-PURPOSE MULCHERS 2.8M - BK280/012, 90-160HP

NOBILI BK MULTI-PURPOSE MULCHERS 3.2M - BK320/012- Y FLAILS- 70-125HP

HIMAC EURO HITCH ROCK SIEVE BUCKET (1.8M)

DIGGA 250MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

DIGGA 150MM AUGER (DEDICATED ROCK) FOR RAMDRILL - HYDRAULIC DRIVE

NOBILI 6M RM610P MULCHER (SUIT 180-350HP)

BURDER SLIDING TINE FORKS (100+ HP) - 1500KG CAPACITY

SPAREX MOWER BLADE FLAT - 96 X 40 X 3MM (RH & LH) - REPLACEMENT FOR DEUTZ-FAHR, CLAAS, FELLA, NIEMEYER, PZ, POTTINGER, KRONE

BURDER XL SQUARE BALE FORKS (4 CONUS I TINES) (80+ HP) - 1100MM

JOHN BERENDS WARRIOR EHD CONTRACTOR SLASHERS 1.8M - 0085, 100+HP

Farm Supplies Machinery & Equipment

Dealer Address