Farm Supplies Machinery & Equipment

Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
Features on our Mulchers make the full range stand out from the opposition.
The AMM series is a medium duty mulcher suitable for pastures and crops. Residues are finely chopped and the swath evenly spread over the ground providing a mulch to improve soil moisture retention and seed germination.
Features:
- 195cm cutting width
- European gearbox (40HP)
- Clevis hitch cat 1 three point linkage.
- Chain top link.
- 4mm Body panel to withstand obstacle impact.
- Blades pivoting on hardened bushes and grade 8 bolts.
- Adjustable height skids.
- Built-in mulching bar.
- 6 series European driveshaft comes with integral clutch
Optional extras:
- Friction clutch
- Height roller
- Twin height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

This heavy duty professional range for tractors of up to 120 hp with side shift and front (or rear) mounting is the entry level to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-L Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat.
I + II for Front or Rear mounting with mechanical side shift;
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar.
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standard
Carbide wearing skids (removable).
Adjustable Vario Intake Bar - cutting bar.
Options:
Hydraulic side shift (56cm lifting range).
Shock absorbing linkage springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modifications of r.p.m /rotation direction.
Rotor with triple Y-blades (additional charge).
Rotor with m shackle flails (additional charge).
Scraper bar for displaced support roller MU-L Vario.
Second Patented removable shredding bar system "Shark Fin".
Hood wear plate (Factory mounted).
Model:
MU-L 180 1800mm 120 HP WW 1800mm Overall width 1970mm Weight 530kg Flails 16
MU-L 200 2000mm 120 HP WW 2000mm Overall width 2170mm Weight 570kg Flails 16
MU-L 220 2200mm 120 HP WW 2200mm Overall width 2370mm Weight 610kg Flails 18
MU-L 250 2500mm 120 HP WW 2500mm Overall width 2670mm Weight 670kg Flails 22
MU-L 280 2800mm 120 HP WW 2800mm Overall width 2970mm Weight 790kg Flails 24
As shown in illustration - MUL 180 280: 56 cm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-L VARIO 280 MULCHER (SUITS 45-120HP) FRONT OR REAR MOUNT

Belt specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX AGRIBELT V BELT - C SECTION - BELT NO. C164

Southern Cross 6ft Slasher - 50-75hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 4mm deck
- Height adjustable skids with five different cuttings heights
- 75HP Bare-Co gearbox
- Bare-Co 8 inch slip clutch
- Bare-Co Series 6 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount
- High tensile chains for durability
- Braced platforms for maximum strength
- 3 Year Gearbox Warranty
- Bare-Co gearbox / slip clutch safety guarding
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (two wheel kits are recommended for the
6ft slasher)
Specifications:
- Recommended Tractor (HP) - 50-75
- Cutting Width (mm) - 1750
- Overall Width (mm) - 1870
- Cutting Height (mm) - 42-167
- Number of Blades - 2
- Blade Size (mm) - 360x12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 4.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/75HP
- PTO Driveline - Bare-CO Series 6 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 8" Slip-clutch included
- Gross Weight - 436kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT SLASHER-SUIT 50-75HP

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 140 MULCHER (35-90HP) FRONT OR REAR MOUNT

MR300- MR Series linkage ripper, 3 tyne, 125 x 125 x 9mm toolbar, adjustable height tynes, leading bevel edge profiled tynes.
The Jarrett MR series rippers are designed for larger area general farm ripping and subsoil aerating. The unique optional Mole attachment allows easy poly pipe laying.
Features:
- Robust construction
- Reversible point
- High strength 150x32mm steel tyne(s) with bevelled leading edge
- 125x9mm RHS frame (MR)
Options:
- Ripper mole
- Laying Poly Pipe with the Mole Drainer
Specifications:
- 3 Tynes
- Weight: 310kg
- 60hp min required
- Cat 2
- 1.8m Frame
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS RIPPER 3 TYNE LINKAGE MR SERIES, MIN 60HP - MR300

400mm - 3 Series Auger up to 5T for 3 point linkage. Light conditions - Earth.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: 3PT Linkage
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

Jarrett Redback Series Slasher 1.8m - 130hp
- Hi-speed gearbox, centre/offset.
- 5mm body and 6mm front and rear apron.
- 6mm x 200 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 1950
Cutting width (mm) - 1800
Total weight (kg) -600
Gearbox hp/(kw)- 130/(97)
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 19,600(100)
Options:
- Solid Rubber Twin Wheel Kit (75hp gbox)
- Super Series Solid Rubber Single Wheel Kit (75-150hp)
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 130HP - RB6-130

Powertech Honda Tamping Rammer
The Powertech Honda Tamping Rammer is perfectly balanced and provides outstanding compaction ability, built with quality in mind and fitted with a German bellow, Japanese clutch and Honda GXR120 4-stroke engine designed by Honda to withstand the vibrations produced by Tamping machines.
Features
- Tamping designed genuine Honda GXR120 4-stroke engine.
- Outstanding self-balanced machine to help reduce operator fatigue.
- Heavy-duty handle mounts.
- Handle roller for easy loading into vehicles.
- Central lifting hook for easy and safe handling.
- Transport wheels included.
Specifications:
Operating Weight: 75 kg
Shoe Size (W X L): 345 x 287 mm
Leap Height: 85 mm
Impact Rate: 650-695 blows/m
Impact Force (Max): 14 kN
Engine Make: Honda
Engine Model: GXR120
Max Rated Power: 3 hp
Fuel Type: Petrol
Fuel Tank Capacity: 2.8 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH HONDA TAMPING RAMMER

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE FLAT - 108 X 48 X 3MM (RH & LH) - REPLACEMENT FOR GALFRE, MARANGON, MORRA, NEW HOLLAND

Burder 12FT (75-100HP) Drag Scraper with Tilt & Dual Wheels. 3.66m Cutting Width.
Made in Australia.
Specifications:
HP: 75-100
Cutting Width: 3.66m
Capacity: 2.29m3
Approx. Weight: 782kg
Options:
- Rippers
- Laser Mounts
The Burder Drag Scrapers are great for touch up and limited land levelling. They work great for short haul projects, smoothing, and small jobs that do not justify the expense of an Ejection Scraper.
This Drag Scraper comes with a tilt feature, allowing you to cut ditches, or crown roads.
The Drag Scraper comes in 4 widths from 8ft (2.44m) to 14ft (4.27m). Whatever your scraping job, we have a scraper to fit your needs.
Rippers (scarifiers) are available for all our standard drag scrapers.
These are good for scarifying and loosening in advance of levelling and planning and with the ripper assembly being hydraulically operated you are able control the depth up to 6 inches from the bottom of the scraper with ease.
The Burder Drag Scraper is the Perfect tool for:
- Road and driveway maintenance
- Site prep
- Pulling material out of buildings
- Snow removal
- Land levelling
Features:
- Reversible cutting edges.
- Swivel hitch.
- Large capacity box.
- Large end plates.
- Ripper options available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 12FT (75-100HP) DRAG SCRAPER WITH TILT & DUAL WHEELS

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

MUTHING MU-L VARIO 280 MULCHER (SUITS 45-120HP) FRONT OR REAR MOUNT

SPAREX AGRIBELT V BELT - C SECTION - BELT NO. C164

SOUTHERN CROSS AG MACHINERY 6FT SLASHER-SUIT 50-75HP

MUTHING MU-H VARIO 140 MULCHER (35-90HP) FRONT OR REAR MOUNT

JARRETT IMPLEMENTS RIPPER 3 TYNE LINKAGE MR SERIES, MIN 60HP - MR300

DIGGA 400MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 130HP - RB6-130

POWERTECH HONDA TAMPING RAMMER

RASSPE RADURA MOWER BLADE FLAT - 108 X 48 X 3MM (RH & LH) - REPLACEMENT FOR GALFRE, MARANGON, MORRA, NEW HOLLAND

BURDER 12FT (75-100HP) DRAG SCRAPER WITH TILT & DUAL WHEELS

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

Farm Supplies Machinery & Equipment

Dealer Address