Farm Supplies Machinery & Equipment

This generator is perfect for housing installations, running compressors, welders and much much more. With an Automatic Voltage regulator (AVR) this generator is designed to maintain a consistent voltage level, causing it to be less likely to damage sensitive equipment.
It comes standard with 2 x 15 Amp outlets. Optional extras include wheel kits and centre point lifts.
Specifications:
Power Rating: 8kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.1L
Noise Level @ 7m: 74dBA
Outlets: 2 x 15 Amp
Approx. Fuel Consumption @ 80% Load: 2.58L/Hr
Operation Hours @ 80% Load: 2.36hrs
Fuel Type: Petrol
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 8 KVA AVR PETROL GENERATOR

Built for reliability, the Gentech range of diesel-powered portable generating sets and welder generators deliver economy and durability unmatched by comparable petrol engines.
Perfect for small appliances (e.g. small air conditioners) and small handheld tools (e.g. 9 grinders, cut-off saws).
Specifications:
Model Rating 0.8pf @ 50Hz: 6.8 kVA
Alternator Rating: 7 kVA
Engine Model: Yanmar L100N5
Engine Speed: 3000 rpm
Phase: 3-Phase
Noise Level @ 7m: 80 dBA
Outlets: 1 x 20 Amp 3PH 5PIN, 2 x 15Amp 1PH
Approx. Fuel Consumption @ 80% Load: 1.65 L/hr
Operation Hours @ 80% Load: 3.3 hrs
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 6.8 KVA DIESEL GENERATOR (ELECTRIC START - 240 / 415V)

6.8 kVA portable generator powered by Yanmar diesel engine with electric start. Featuring a 5.4 litre fuel tank, giving 3.3 hours of operation at 80% load.
Built for reliability, the Gentech range of diesel-powered portable generating sets and welder generators deliver economy and durability unmatched by comparable petrol engines.
Specifications:
Model Rating 0.8pf @ 50Hz: 6.8 kVA
Alternator Rating: 7 kVA
Engine Model: Yanmar L100N5
Engine Speed: 3000 rpm
Phase: 1-Phase
Fuel Tank Capacity: 5.4 L
Noise Level @ 7m: 80 dBA
Outlets: 2 x 15 Amp
Approx. Fuel Consumption @ 80% Load: 1.65 L/hr
Operation Hours @ 80% Load: 3.3 hrs
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 6.8 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

Electric start.
This generator is perfect for housing installations, running compressors, welders and much much more. With an Automatic Voltage regulator (AVR) this generator is designed to maintain a consistent voltage level, causing it to be less likely to damage sensitive equipment.
It comes standard with 2 x 15 Amp outlets. Optional extras include wheel kits and centre point lifts.
Specifications:
Power Rating: 8kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil/E-start
Fuel Tank Capacity: 6.1L
Noise Level @ 7m: 74dBA
Outlets: 2 x 15 Amp
Approx. Fuel Consumption @ 80% Load: 2.58L/Hr
Operation Hours @ 80% Load: 2.36hrs
Fuel Type: Petrol
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 8 KVA AVR PETROL GENERATOR (ELECTRIC START)

4 high-performance solutions in one rugged and practical package, this workstation is your answer if you need a:
- Welder
- Generator
- Air Compressor
- 12/14 Volts of DC Power
Specifications:
Cont. Output Watts: 6000
Engine Model: Honda IGX390
Phase: 1-Phase
Starting System: Recoil/Electric
Noise Level @ 7m: 69 dBA
Outlets: 2 x 15 Amp plugs
Welder: 200 Amp (AC)
Duty Cycle: 60%
Compressor: 14 CFM
Air Tank Capacity: 50 L
Battery Charger: 10 Amp
Operation Hours @ 80% Load: 1.65 hrs
Fuel Type: Unleaded
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA WORKSTATION PETROL GENERATOR (ELECTRIC START)

7 kVA portable welder/generator powered by Honda petrol engine with electric start.
This generator is the workers choice, featuring 7 kVA of real grunt and up to 200 Amps of welding power for exceptional performance to keep you working until the job is done.
Specifications:
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil/E-Start
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Welder: 200 Amp
Duty Cycle: 60%
Approx. Fuel Consumption @ 80% Load: 2.44 L/Hr
Operation Hours @ 80% Load: 2.5 hrs
Optional Extras:
10-WELD LEADS-08 - 8MTR kVA, Heavy duty leads, clamps, electrode holder suits both 200A and 230A models.
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA WELDER PETROL GENERATOR (ELECTRIC START)

Long lasting, high performing and robust, this generator is the cream of the crop. With a massive 34-litre fuel tank, this workhorse is ready to power up all your equipment around the farm and construction site. And it runs for over 6.5 hours at 80% load.
The Honda V Twin GX690 petrol engine with electric starting system delivers 15 kVA of power, with the fuel economy and reliability you'd expect from Honda. The result is enough grunt for welders, compressors, larger pumps and other heavy duty equipment. And because the fuel consumption is only 4.10 litre per hour, builders and farmers can enjoy better bang for your buck.
The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with 3 year warranty.
Builders and farmers find this generator ideal for general all-round performance with lots of grunt for welders, compressors and other heavy duty equipment (e.g. wool presses, medium sized and medium sized air conditioners). Featuring a 34 litre fuel tank built into the base and an electric starting system, this generator is a winner at home, on the Ute or in the shed.
Specifications:
Power Rating: 15 kVA
Model Rating 0.8pf @ 50Hz: 15 kVA
Alternator Rating: 15 kVA
Engine Model: Honda V Twin GX690
Phase: 1-Phase
Starting System: Electric start
Fuel Tank Capacity: 34 L
Noise Level @ 7m: 75 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 5.66 L/Hr
Operation Hours @ 80% Load: 5.66 hrs
Fuel Type: Petrol
Diam.: 876 x546 x 700 mm (L x W x H)
Weight: 160 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 15 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

If you're in need of serious power for large power tools or backing up your house, then look no further.
With EFI (Electronic Fuel Injection) for maximum fuel efficiency, enhanced reliability and improved start up.
This massive generator comes standard with long range fuel tank, battery, centre point lift, 2 x 32 Amp and 1 x 15 Amp outlets with circuit breaker.
Specifications:
Power Rating: 20 kVA
Model Rating 0.8pf @ 50Hz: 20 kVA
Alternator Rating: 20 kVA
Engine Model: Honda iGX800 with Electronic Fuel Injection
Phase: 1-Phase
Starting System: Electric start
Fuel Tank Capacity: 34 L
Noise Level @ 7m: 75 dBA
Outlets: 2 x 32 Amp and 1 x 15 Amp 3 Pin outlets with circuit breaker
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 6.88 L/Hr
Operation Hours @ 80% Load: 6.15 hrs
Fuel Type: Petrol
Dimension: 880 x 550 x 710 mm (L x W x H)
Weight: 160 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 20 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

Electric start.
The 16 kVA 3-phase portable generator by Gentech. Fully assembled in Australia, this formidable machine is powered by a Honda V Twin GX690 petrol engine with electric start. The 27-litre fuel tank delivers over 6.6 hours of operation at 80% load that's enough for a days work (including coffee breaks!).
Welders, compressors and heavy duty equipment are no match for this generator. Its built tough, so you can rely on this workhorse around the construction site or farm for many, many years to come.
Please note that the single phase (230-240V) outlet produces one third of the generator's power capacity.
The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 3 year warranty.
Builders and farmers find this generator ideal for general all-round performance with lots of grunt for welders, compressors and other heavy duty equipment (e.g. wool presses, medium sized and medium sized air conditioners). Featuring a 34 litre fuel tank built into the base and an electric starting system, this generator is a winner at home, on the Ute or in the shed.
Specifications:
Power Rating: 16 kVA
Model Rating 0.8pf @ 50Hz: 16 kVA
Alternator Rating: 16 kVA
Engine Model: Honda V Twin GX690
Phase: 1-Phase / 3-Phase
Starting System: Electric start
Fuel Tank Capacity: 34 L
Noise Level @ 7m: 75 dBA
Outlets: 1 x 32 Amp 3PH 5PIN, 2 x 15Amp 1PH
Volts: 230V / 415V
Approx. Fuel Consumption @ 80% Load: 5.58 L/hr
Operation Hours @ 80% Load: 6.09 hrs
Fuel Type: Petrol
Diam.: 876 x546 x 700 mm (L x W x H)
Weight: 165 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 16 KVA PETROL GENERATOR (ELECTRIC START - 415V ENGINE POWERED)

Electric start.
Builders and farmers find this generator ideal for general all-round performance with lots of grunt for welders, compressors and other heavy duty equipment (e.g. wool presses, medium sized and medium sized air conditioners). Featuring a 34 litre fuel tank built into the base and an electric starting system, this generator is a winner at home, on the Ute or in the shed.
Specifications:
Power Rating: 9.5 kVA
Model Rating 0.8pf @ 50Hz: 9.5 kVA
Alternator Rating: 9.5 kVA
Engine Model: Honda V Twin GX630
Phase: 1-Phase
Starting System: Electric start
Fuel Tank Capacity: 34 L
Noise Level @ 7m: 75 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 8.84 L/hr
Operation Hours @ 80% Load: 7.11 hrs
Fuel Type: Petrol
Diam.: 876 x 546 x 700 mm (L x W x H)
Weight: 110 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 9.5 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

Gentech WS200-14-10HSR, 7 kVA portable workstation generator powered by Honda petrol engine. Featuring 6.5 litre fuel tank, giving 2.5 hours of operation at 80% load.
FEATURES:
- 240V Workstation
- 7kVA Generator
- 14 CMF Compressor
- 200 Amps @ 60% Welder
- 160 Amps AC Welding
- 10 Amps DC Battery Charging
- 50L Air Tank Capacity
Specifications:
Honda GX390 engine
Fuel tank: 6.5L
Approx run time: 2.5hrs @ 80%
Noise level: 69 dBA @ 7m
Dimensions: 900x870x680mm (LxWxH)
Weight: 105kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA WORKSTATION PETROL GENERATOR

Built tough, this generator is fitted with all the specifications required for the mine site and is first when it comes to mining safety.
Features:
Detachable fire extinguisher
Battery Isolator switch
Individual lockable RCD switches
15amp weatherproof outlets
Emergency stop button
Bunded fuel tank with lockable cap
Centre point lifting bar
Specifications:
Power Rating: 6.8kVA
Cont. Output Watts: 5400
Engine Model: Yanmar L100N5
Phase: Single Phase
Engine Horsepower: 8.8hp
Starting System: Recoil/Electric
Fuel Tank Capacity: 36L
Noise Level: 80dBA
Outlets: 2x 15Amp
Operation Hours: 21hrs
Fuel Type: Diesel
Dimentions: 876mm x 546mm x 700mm
Weight: 160kg
Optional Extras:
10-N8-WK400-009 - Heavy duty 4 x 400 diameter wheels with 2 x axles.
80-EARTH STAKE - Copper earth stake with earth cable.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 6.8 KVA GENTECH MINE SPEC DIESEL GENERATOR (ELECTRIC START)

Find Portable Generators For Sale from Farm Supplies Machinery & Equipment.

New & Used Portable Generators For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

GENTECH 8 KVA AVR PETROL GENERATOR

GENTECH 6.8 KVA DIESEL GENERATOR (ELECTRIC START - 240 / 415V)

GENTECH 6.8 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

GENTECH 8 KVA AVR PETROL GENERATOR (ELECTRIC START)

GENTECH 7 KVA WORKSTATION PETROL GENERATOR (ELECTRIC START)

GENTECH 7 KVA WELDER PETROL GENERATOR (ELECTRIC START)

GENTECH 15 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

GENTECH 20 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

GENTECH 16 KVA PETROL GENERATOR (ELECTRIC START - 415V ENGINE POWERED)

GENTECH 9.5 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

GENTECH 7 KVA WORKSTATION PETROL GENERATOR

GENTECH 6.8 KVA GENTECH MINE SPEC DIESEL GENERATOR (ELECTRIC START)

Farm Supplies Machinery & Equipment

Dealer Address