Farm Supplies Machinery & Equipment

The Australian designed and made Speed Guide is a simple attachment to the front of standard air-operated clip guns used in clipping netting or hinged joint fences.
Using this system, we have been able to double the rate of clipping along the line. The straightforward design cuts down on the need to manually hold wires together whilst clipping, and reduces the time needed to aim the clip gun. The guide is supplied with an Allen key and spanner to attach onto your gun.
Current models are now reversible, allowing it to be stored backwards on the clip gun out of the way for applications such as clipping up against strainer posts.
Tested on Airco clip guns. Should work on Waratah/Marchant and Airco battery powered clip guns as they all have the same working mechanism at the front end.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING CLIP GUN SPEED GUIDE

Australian Made to suit the harsh Australian environment
Weighing 13.5kg for the CHPD52 (smaller model) and 16.3kg for the CHPD78 (this model). Both models are lightweight and portable but still able to drive posts as swiftly as much larger and heavier hydraulic and pneumatic tools.
The high impact hammer action of 1780BPM will drive steel fence pickets into the hardest ground in a matter of seconds and the portable design allows operators to move along a fence line with ease. The driver uses an efficient Honda GX35 4-stroke motor to give the best service life possible.
The CHPD52 (other model) has a 52mm receiver guide tube which allows most standard posts and pipe up to 50mm diameter, as well as timber 35mm square to be driven, while the CHPD78 (this model) has a redesigned lower hammer section to allow much larger posts and pipe to be driven right up to 75mm diameter without any other adapters. The redesigned lower hammer transfers the impact to the post more efficiently allowing larger posts to be driven with ease.
Blows Per Minute - 1780
Joules - 26
KW - 1.0 (1.3hp) at 7,000 rpm, 4-stroke, overhead cam Trigger throttle with integrated stop button, Spring isolated hand grips
Fuel Consumption - 0.71 L/h at 7,000 rpm. Meets strictest worldwide emission and noise requirements
Starting System - recoil (pull start)
Rating - Continuous use on standard posts
Weight - 16.3kg
Engine Warranty - 3 Year genuine Honda warranty
Post Driver Warranty - 12 months parts failure
Noise Level - 100dB Hearing protection required
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE

CHRISTIE CHPD78 - 76MM OD POST DRIVER

Series 60 Land Roller - 3 Metre.
A specialised implement for jobs that require flattening and levelling.
Can be built to any specification.
Specifications of implement pictured:
- Diameter 1500mm
- Shell Thickness 22mm
- Overall Length 4,040mm
- Overall Width 3,190mm
- Roller Width 2,930mm
- Dry Weight 3,174kg
- Wet Weight 7,900kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY LAND ROLLER 3 METRE - SERIES 60

The Premium Plus Trailing Shoe is fully galvanized and features a unique 6-point linkage for optimal ground flotation. Its unique boom geometry allows it to easily follow ground contours.
Hydraulic folding rams protect the hoses during transport, while the vertical folding design minimizes transport width.
A central distributor chops and evenly distributes slurry.
Additionally, Premium Plus Applicators support the use of an umbilical arm.
Features:
- Fully galvanized
- Vertical folding
- Soil engaging shoe with down pressure and float
- Chassis mounted
- Unique design provides significant soil engagement with enhanced contour following
- Distributor with 5 feed pipe, auto reverse and manual change over
- 40mm hosing
- Ballast weights
- Facility for splash plate attachment
- Rear lights
- Includes tanker mounted diverter and in cab switch box controls
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ABBEY 7.7M TRAILING SPREADER (SLURRY)

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 360cm
Required HP: 240-350hp
Weight: 2595kg
No of Blades: 9
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

4.19m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3309 - 4.19m (13ft 9in) (20 Row) - 2/9 Tine, 3/12 Tine - 65kg
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Made in Canada
Suits 863 (34") - 2,260 mm (89") tyres
Features:
- Efficiently handle large tyres without physical stress, safety risks and additional personnel
- Extended reach gripper and 50° rotation
- 3-arm configuration balances the tyre perfectly
- Industry-certified and engineer-approved
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Length = 2,032 mm
Width = 2,032 mm
Height = 1,117 mm
Teeth Length = 660 mm - reversible teeth for handling greater variety of tyres sizes
Load Capacity = 1,814 kg
Swing - Not Applicable
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO TYRE GRABBER SUITS 863MM (34") - 2260 MM (89") TYRES

Linkage turbomiser 600 litre sprayer with a 140 L/min centrifugal pump and a 550mm fan. Ideal for vineyards, orchards and greenhouses. Note: spray head not included
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 600
Connection Type: Linkage
Min PTO hp: 70
Pump Size (L/min): 140
Height / Width / Length (mm): 1150 / 1450 / 1100
Product Weight (kg): 250 (dry)
Application: Vineyards, orchards, greenhouse
Features:
Pump: CD32 centrifugal pump, 140L/min. constructed from toughened nylon. Stainless steel shaft & viton/ceramic seal
Fan Size: P55DS:550mm dia. turbine fan, 3700 rpm. Power consumed 50 kw/70HP.
Nozzles: Air shear.
Gearbox: Multiplication type through multi-grip, multi-vee belt and pulley, over-run free wheeling hub and oil bath fan housing.
Controls: Two sided electric on/off control with control box mounted in cabin. Rotary plate distribution regulators with 15 settings and manual pressure adjustment.
Frame: Galvanised RHS steel construction, cat II linkage.
Tank: 600L Polytuff impact resistant polyethylene construction, calibrated sight line, non spill lids, hydro chemical mixer in larger basket, lids with basket strainers, seperate in-built 18L fresh water hand wash tank.
Agitation: Bypass and pneumatic
Pressure Gauge: Protected 100mm glycerine gauge fitted at front of sprayer
Filtration: Lid strainer and suction line strainer
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 70 PTO HP
Options:
- Vineyard head - 4 heads (4 x 5) (GT55D-40)
- Orchard Cannon head (GT55-13)
- Super Cannon head (GT55D-1)
- Hydraulic turntable for Super Cannon (GT55D-9)
- Bravo 180S automatic rate controller (GT-24)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 600L P55DS LINKAGE TURBOMISER - MIN 70PTO HP (SPRAY HEAD NOT INCLUDED)

Mesh Gate - 4800mm. (16FT)
All gates are manufactured from 25NB pipe and are a standard 1170mm high.
Features:
- All made with 200mm x 100mm x 5.0m mesh infill
- Available in widths from a 830mm (2'8") personnel gate to a - 4800mm (16') farm gate
- All gates over 2400mm (8') have a vertical 'I' brace and two braces in gates over 4200mm (14')
- 'N' bracing also available for gates over 2400mm (8')
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS MESH GATE - 4800MM (16FT)

Silvan 1.8m (6ft) Heavy Duty Slasher with 100HP gearbox.
Suited to large acreage applications including clearance, firebreaks, private roadsides or where major cutting & cleaning is required.
Features:
- Construction: welded 6mm top deck plate, welded steel side plates with adjustable skids.
- Gearbox: 100HP Series 8. 1:1.93 ratio.
- PTO Shaft Rating: 540RPM
- Head Stock: Collapsible floating hitch.
- Finish: Long lasting galvanized top deck.
- Skids: Adjustable from 50-150mm cutting height.
- Blades: 3 leaf spring steel rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat. II TPL centre mount attachment.
- Clutch: 8" 2 plate friction clutch.
- Instructions: Operators manual and holder supplied.
- Chain Guards: Front and rear chain guards
Specifications:
- Connection Type: Linkage
- Working Width (mm): 1,800
- Overall Width (mm): 1,900
- Cutting Height (mm): 50-150
- Overall Height (mm): 1,020
- Product Weight (kg): 471
Options:
103WRSHC2 - Height Control Wheel (2 recommended for 7' models)
131RSHC2 - Heavy Duty Height Control Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1.8M (100HP G'BOX) - INCL ROTOR & CHAIN GUARDS - HEAVY DUTY SLASHER

Extra heavy duty hydraulic side-shift mulcher, for tractors from 80-140 hp. Suitable for mowing grass and mulching prunings and wood up to 150mm in diameter.
Features:
- 140 hp rated gearbox
- 2400 RPM rotor speed
- 30cm high intake
- Integrated over-run clutch
- High clearance intake (30cm)
- Hydraulic side shift (60cm)
- Fixed upper and rear counter blades
- Double skinned chassis
- 220mm diameter adjustable rear roller for cutting height
- Side skids
- 5 belt side transmission with automatic belt tensioner
- 540 rpm PTO
- Front protection chains
- Flat hammer flails (1.4kg)
- 20mm flail bolt
- 8 + 8mm chassis
Overall Width = 2,680 mm
Cutting Width - 2,400 mm
Hammers = 20
HP Required = 90 - 120hp
Weight = 1,040 kg
Options Available:
Y Flails, in Lieu of Hammer Blades
Self Steering Rear Wheels, in Lieu of rear roller
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.4M (90-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

A Simple & Secure Drop Bolt. Are you looking to secure two gates that swing together? Our galvanised drop bolts will ensure your gates will stay put.
Our drop bolts are designed to be used vertically on your gates. By dropping them into a solid foundation such as a hole in the concrete or a pipe that sits in the ground, they ensure your gate remains closed and secure.
Each gate drop bolt allows you to attach a padlock to secure your gates even further.
Price quoted is for one bolt.
Discounts apply for bulk purchases of 10+
Specifications:
- 400mm overall length
- 12mm pin
- Galvanised
Features:
- Quick & Easy to install
- Lockable
- Rust Resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL GATE DROP BOLT LOCKABLE 400MM - GDB400

Find Farm Machinery For Sale in Queensland. Browse 7661 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

WALTERS FENCING CLIP GUN SPEED GUIDE

CHRISTIE CHPD78 - 76MM OD POST DRIVER

MURRAY LAND ROLLER 3 METRE - SERIES 60

ABBEY 7.7M TRAILING SPREADER (SLURRY)

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

HIMAC EURO TYRE GRABBER SUITS 863MM (34") - 2260 MM (89") TYRES

SILVAN 600L P55DS LINKAGE TURBOMISER - MIN 70PTO HP (SPRAY HEAD NOT INCLUDED)

LEMPRET WIRE & SEALANTS MESH GATE - 4800MM (16FT)

SILVAN 1.8M (100HP G'BOX) - INCL ROTOR & CHAIN GUARDS - HEAVY DUTY SLASHER

CELLI 2.4M (90-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

ROTECH RURAL GATE DROP BOLT LOCKABLE 400MM - GDB400

Farm Supplies Machinery & Equipment

Dealer Address