Farm Supplies Machinery & Equipment

Medium duty left hand offset verge mulcher, for tractors 55 to 110hp. Ideal for general mowing and mulching on verges, banks and roadsides.
Specifications:
Actual Width: 246cm
Working Width: 225cm
Required HP: 75hp
Weight: 860kg
No of Blades: 20
Features:
110hp rated gearbox
Left hand offset
540rpm PTO (2278rpm-tip speed 52.5m/s)
4 belt transmission
Category 2 linkage
Shock absorber with pressure relief valve fitting onto side-shift arm
Front and upper counter knives
Rear roller
Side-shift & tilt (angle) adjustment by hydraulic rams
Gearbox with freewheel safety device
Side skids
Hammer flails
Double skinned chassis
Wide angle driveshaft
Models:
PEGASUS 175 175cm Working width 55hp 780kg 16 Blades
PEGASUS 200 200cm Working width 65hp 810kg 18 Blades
PEGASUS 225 225cm Working width 75hp 860kg 20 Blades
PEGASUS 250 250cm Working width 85hp 915kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.25M (65HP) PEGASUS SWING ARM SIDE MULCHER

Hinge joint strainer 1200mm.
To strain up your fence wire, the tried and true method is to use a Chain Strainer. For straining up a mesh fence you will need 2 Chain Strainers connected to a Mesh Clamp.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS HINGE JOINT STRAINER 1200MM

Linkage 300 litre Slimline sprayer with 20 L/min pump, NO boom.
Specifications:
Market: Ag Lifestyle.
Tank Size (L): 300
Connection Type: Linkage
Pump Size (L/min): 20
Height / Width / Length (mm): 1070 / 740 / 1105
Product Weight (kg): 70
Application: Pasture and Ag Lifestyle spraying.
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body. BP20/15: 20L/min. capacity 1500kPa pressure. BP60/20: 58L/min. capacity 2000kPa pressure.
Controls: BP20/15: 2 outlet control valve with pressure regulation. BP60/20: 3 outlet control valve with pressure regulation.
Tank: Polytuff impact resistant polyethylene construction, moulded litre calibrations and non-spill screw-down lid with single breather.
Frame: Fully galvanised steel, cat. I & II linkage.
Agitation: Bypass agitation.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer, suction line strainer.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
Options:
- 6m Field boom
- 8m Field boom
- 8 Jet vine boom (Used with BP60/20 pump only)
- 10 Jet vine boom (Used with BP60/20 pump only)
- Undervine & mid row boom
- Boomless nozzle mounting kit (brass nozzle not included)
- 14L foam marker (single side)
- 16L foam marker (double side)
- Economy hosereel, 30m hose (12mm ID), PA spray gun & extension lance
- Electric on/off control-3 section (GOYEN solenoids)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 300L SLIMLINE LINKAGE SPRAYER - BP20/15 PUMP, NO BOOM

Medium duty offset discs ideal for all agricultural and cropping operations. With hydraulic gang and levelling control.
Manufactured in Italy.
Specifications:
Working width: 3200mm
Discs: 28
Weight: 2550kg
Features:
Hydraulic gang adjustment ( Separate ram for both gangs)
Manual levelling adjustment (Optional hydraulic)
12.5/80-15 PR14 tyres
Hydraulic drawbar offset (Optional manual)
660mm scollped discs
6mm thick disc blades
230mm disc spacing
8 bearings (double taper roller) GB280-320
12 bearings (double taper roller) GB370
Bearing protectors
40mm square shaft
150 x 100 x 8mm chassis and gang beam
Swivel hitch
Options:
Manual drawbar offset
Hydraulic levelling adjustment
Models:
GB280 2.8M 24 DISCS 2280kg
GB320 2.8M 28 DISCS 2550kg
GB370 2.8M 32 DISCS 2900kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

GB 3.2M, 28 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

The Auger Torque Cement Mixer Bowl 180 is perfect for Mini Loaders, Skidsteers and Excavators 1T - 7T.

Fencing tasks over rough ground often require post fixing cement to be mixed in small quantities, however rough terrain can often mean a traditional mixer cant be used.

Auger Torques drill/mix solution changes all that. With the aid of the mixer cradle hitch, the auger can be quickly removed and the mixer bowl attached and locked in place with the standard auger pin. After the concrete has been laid the auger can be replaced for the next post. Simple!

The 180-litre capacity mixer bowl attaches quickly and easily to our earth drills. Skid steer and excavator mount brackets are available, and a mixer bowls is the perfect addition to our Mini Loader Earth Drill range

AUGER TORQUE 180L MIXER BOWL 75MM SQUARE DRIVE

3.70m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3307 - 3.70m (12ft 2in) - 4/9 Tine, 1/12 Tine - 52kg
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.70M, 3 RANK DEEP SECTIONS & STD DRAWBAR-LIGHT DUTY-COMPLETE SET

This large 22,500L (5,000 gallon) water tank is well suited to rural properties or large town blocks where you require plenty of water storage especially in combination with a second tank when rainwater is your main supply for household use.
This certified rainwater tank is manufactured with strength in mind.
Dimensions:
Capacity: 22,500 L (5000 gallons)
Diameter: 3,560 mm
Inlet Height: 2,470 mm
Overall Height: 2,800 mm
Features:
- Self supporting roof means no support poles are necessary
- One piece construction means no joins or seams
- Solid brass threaded outlet & ball valve as standard
- Upgraded outlet and ball valves are available at an additional cost
- Certified to AS/NZS 4766:2006 Standard
- Outlet standard position 6 o'clock
- Outlet position can be moved from standard based on positions on the Fit Out Clock
- Replacement manhole covers and strainers available
- Available in 22 Colours
- 90mm overflow as standard
Standard Fit Out:
Strainer Position: 12 oclock
Outlet Position: 6 oclock
Overflow Position: 11.30 oclock
Strainer Size: 400 mm
Outlet size: 40 mm (Brass)
Ball Valve: 40 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 22,500L RAINWATER TANK

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 6MM DISCS - 0841, SUIT 60-130HP

Suits KN15D-2, WP12-1, TR13-1, and TR13-B sprayers.
Spray boom for hand held lances.
Features:
- 40cm wide T boom to achieve 80cm wide spray swath (with boom 40cm off the ground)
- two flat fan nozzles with strainers to minimise nozzle blockage
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN TWO NOZZLE T BAR BOOM

Versatile & Simple Gate Latch
Looking for a simple chain latch to attach to your gate? Our bolt-on double gate latch kits are perfect for secure two or more gates together particularly if they meet at a corner.
Do you have two or more gates that need to be secured shut? These chain latch kits bolt onto your gate and can loop around a post or another gate. Its perfect if you have a two, three or four gates meeting at a corner.
Are you tired of gates swinging shut when you are running stock through? By having your latch attached to your gate, you can swing the gate open and then latch it onto your fence. This means it wont close at the most inconvenient of times.
Smooth Front Edge
When the latch is mounted, the hook is inside the gate rather than protruding out from the gate frame. This makes it less likely that livestock will be hurt or caught when moving through the gateway.
Adjustable
Our longer chain allows for adjustment as the gate way openings may increase over time.
Versatile
You can use the same latch to go around the post, for double gates, and even three-way gates. This is possible because of our unique 700mm long chains.
Price quoted is for one kit.
Includes gate clamp and hook latch.
Discounts apply for bulk purchases of 10+, 25+, 50+.
Specifications:
- 25NB gate
- 700mm chain length (best for reaching around posts)
- 1 x standard hook latch
- 1 x gate clamp
Features:
- Smooth front edge
- Adjustable
- Versatile
How The Latch Works
Our galvanised bolt-on latches are available with either a hook latch or a pin latch.
The pin latch is more secure. The end of the pin is pinched to a point, which is designed to only fit one way into the latch hole. To unlatch your double gates, the pin has to be spun around to be in the correct position in order to be opened.
With the hook latch, we have designed the ring to be on its side for extra security. If the hook accidently gets bumped up, it will hit the top of the ring and fall back down. Whereas, if the ring was horizontal then it would be easier for stock to accidently unlatch it. By having the ring in a vertical position, it makes it more stock proof. The hook latch is also available as a spring hook.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 25NB BOLT-ON HOOK LATCH 700MM- BCL700

This landscape rake is ideal for raking light material, harrowing pastures and for final soil surface preparation whether it be on the driveway, the garden or even the horse arena.
Features:
Three different pitch settings controls the aggressiveness, including one float position which allows the tine to hinge backwards on the frame used when operating around rocks or stumps and enables the tines to lift over those obstacles.
There is enough weight in the frame to keep the tines on the ground under normal raking conditions.
Heavy tubular construction with heavy tines it makes the imported ones look lightweight.
12 month warranty.
Specifications:
Cat 1 Linkage
Double bolt mounting system for tines.
Fitted with 32x10mm hardened tines spaced at 65mm centres.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS LANDSCAPE RAKE 1.8M (6FT) - 0373

Silvan motorised pumping units provide a go anywhere pressure pumping unit in a wide range of sizes and capacities.
Each unit consists of a matched engine and pump, control valve, base plate, hose connections and in most cases pressure gauge as standard equipment
Features:
Pressure accumulator with pressure gauge
Honda engine GX120
Oil backed diaphragm pump
Direct coupled to motor
Adjustable pressure regulator
Inlet size 19mm
Outlet size 10mm
1 metre maximum suction lift
Pump Size 18.5 L/min
Pressure Rate 20 bar / 290 psi
Height / Width / Depth 360mm / 340mm / 540mm
Product Weight 12 Kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN MC20/20 4 STROKE MOTORISED PUMP - SILVAN - LBA-34C

Find Farm Machinery For Sale in Queensland. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

CELLI 2.25M (65HP) PEGASUS SWING ARM SIDE MULCHER

LEMPRET WIRE & SEALANTS HINGE JOINT STRAINER 1200MM

SILVAN 300L SLIMLINE LINKAGE SPRAYER - BP20/15 PUMP, NO BOOM

GB 3.2M, 28 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

AUGER TORQUE 180L MIXER BOWL 75MM SQUARE DRIVE

MURRAY SERIES 03 LEVELLING HARROW 3.70M, 3 RANK DEEP SECTIONS & STD DRAWBAR-LIGHT DUTY-COMPLETE SET

POLYMASTER 22,500L RAINWATER TANK

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 6MM DISCS - 0841, SUIT 60-130HP

SILVAN TWO NOZZLE T BAR BOOM

ROTECH RURAL 25NB BOLT-ON HOOK LATCH 700MM- BCL700

JOHN BERENDS LANDSCAPE RAKE 1.8M (6FT) - 0373

SILVAN MC20/20 4 STROKE MOTORISED PUMP - SILVAN - LBA-34C

Farm Supplies Machinery & Equipment

Dealer Address