Farm Supplies Machinery & Equipment

Features:
90 HP single speed gearbox.
1550mm working width.
Side gear drive.
CE safety guards.
42 x C Blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 50-90 HP
Working Width: 1550mm
Working Depth: 100-200mm
Product Weight: 520kg
Total Width: 1800mm
Options:
Front Depth Wheels
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.55M B85 ROTARY HOE (MIN 50-90HP)

The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
LED light kit
Full width walking axle
Full width front & rear safety chains
Heavy duty industrial tyres (wide)
Premium long life shaft drive
Universal drawbar for high or low towing
Adjustable levelling tie bars
Hydraulic wing lift and support
Mechanical wing float support
Full length side skids
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

Southern Cross Finishing Mowers are a great alternative to a ride on mower. They provide the same quality finish with a 6ft / 180cm width cut. Ideal for house paddocks, polo fields, golf courses and playing fields. Manicure your acreage and mow close to shrubs and buildings.
Features:
Four adjustable caster wheels for varying cutting heights
Floating hitch
Three Year Gearbox Warranty
Three belt-driven blades
Quick coupler PTO driveline shaft
Category one hitch pins
Greaseable Spindle bearings
Chain guard to prevent thrown objects
Bare-Co PTO shaft (Australian Standard Compliant)
* Please Note: Some images featuring the 6ft Finishing Mower appear with a Quick Hitch. This is an additional product and is not required to operate the mower.

Specifications:
No of Blades - 3
Blade Tip Speed (m/s) - 71
Deck Thickness (mm) - 4
Recommended Tractor (HP) - 25-60
Cutting Width (mm) -1800
Overall Width (mm) -1840
Cutting Height (mm) - 35-115
Blade Size (mm) - 610X60X6
blade Spindle - 6205 bearings
Belt Drive - V-Belt B1880
3 pt. Hitch - Free-Floating Category One
Gauge Wheel Solid Rubber (Width x Diameter mm) 79 x 208
Gearbox: - 1:2.83
PTO Driveline - Bare-Co Series 4 PTO Shaft
Grass Discharge - Rear Discharge with wide 1080mm throat.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT FINISHING MOWER, TRIPLE BLADE. SUIT 25-60HP- 6FMOWR

The R150 trailed ATV spreader is ground driven and designed for spreading fertiliser on sporting fields, lawn and pasture.
It is ideal for towing behind compact tractors and ATV motorbikes
The hopper is manufactured from a single piece of spun seamless steel.
Features:
- Attachment Adjustable draw bar with 5 different height positions.
- Driveline - Two piece cast gearbox with constant drive, one driven wheel, one free wheel.
- Tyres 13×5-6 Pneumatic tyres.
- Control One single lever for rate control, with mechanical agitator.
- Capacity 107 Litres
- Width of throw 3-8m
- Dimensions (LxWxH) 1500mm x 860mm x 950mm
- Weight = 61kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN R150 FERTILISER SPREADER - SILVAN - BMC-R150

Series 38 Manual winch rigid frame with 2 section rigid S08 Stump Jump Harrow. 1.72m. Transport width: 1.79m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 1.72M (2 SECTION) RIGID FRAME STUMP JUMP HARROW

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 4130kg
No. of Bearings: 24
No. of axles: 12
Cutting width: 5.71m (18ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 26 INCH DISCS - 0965

Medium duty rotary hoe with gear side drive. Suitable for tractors up to 55 hp.
Specifications:
Actual Width: 200cm
Working Width: 185cm
Required HP: 30hp
Weight: 330kg
No of Blades: 42
Features:
Rated up to 55hp
Single speed gearbox
540 rpm
Side gear drive
70 x 7mm "L" blades
200mm working depth
Side-skids
Foot stand
Slip clutch
Models:
APLHA 155 160cm Working Width 25-55hp 310 kg 36 Blades
APLHA 165 175cm Working Width 25-55hp 322 kg 36 Blades
APLHA 185 185cm Working Width 30-55hp 330 kg 42 Blades
APLHA 155 155cm Working Width 35-55hp 342 kg 42 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.85M (55HP GEARBOX) ALPHA ROTARY HOE

Great looking solutions for urban water conservation. These Slimline water tanks have been designed to hold the maximum volume of water for the minimum surface area used.
This 2,0000 L water tank comes with the Garden Water System (Garden Pump & Press Control in separate pump housing) to make your gardening easier.
Dimensions:
Capacity: 2,000 L
Length: 2,370 mm
Width: 600 mm
Height : 2,010 mm
Features:
- Use stored rainwater on your garden.
- Place complete packaged pump unit beside your tank with garden tap attachment
- 40 LPM garden pump
- 240v power
- Automatic pressure controller (Start & Stop on demand)
- 2 year warranty on pump
- Colour matched pump cover to protect pump from the elements
- Space-saving modern design, ideal for tight spaces
- Hand grips for easy lifting
- Can be coupled to other tanks for even greater volume
- Available with submersible pump, packaged pump unit or garden pump systems
- Available in 22 Colorbond colours
Standard Fit Out:
Strainer Position: 6 o'clock
Outlet Position: 6 o'clock
Overflow Position: 12 o'clock
Strainer Size: 400 mm
Outlet: 25 mm (brass)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 2,000L RAINWATER TANK & GARDEN PUMP (SLIMLINE)

Can be fitted to your diesel or oil pumping product, or directly to the dispensing nozzle.
There are three configurations to match your diesel transfer setup.
Features:
Easy to mount Diesel inline fuel meter
Able to be calibrated and provides information as to the individual or the totality of litres counted.
Flow rate of 10-120 L/min
Compact and sturdy design
H 55mm x W 75mm x D 100mm
Max pressure 10 bar of 145 PSI
Accurate to +/- 1%
1 BSP female inlet and male outlet
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN PIUSI K24 DIGITAL DIESEL METER - SILVAN - PF11

A sickle bar mower is a type of mower that uses a reciprocating blade, similar to a scissor action, to cut vegetation. It features stationary teeth and a blade that moves back and forth between them. This mechanism allows for a clean cut and is particularly useful for mowing grass, hay, and tall weeds.
This front hitch version reaches high working speed without clogging, guaranteeing a precise and clean cut.
The mower is equipped with a patented 3 point system that allows the machine to work in any types of terrain.
Gearbox transmission in oil bath, equipped with a double deflector as standard.
Weight = 530 kg
HP required = 70 hp
Min cutting height = 3 cm
Working speed = 8 -12 km/hr
Standard Equipment:
- Hitch Front PTO
- Mechanical safety device
- Anti ripple rod
- Blade protection
- Cardan PTO shaft
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ENOROSSI 2.7M SICKLE BAR MOWER (FRONT MOUNT)

Made in Australia
Features:
- 6 mm high grade plate shell
- Gravity pour delivery
- Cost effective concrete solution
- Heavy duty Aussie construction
- Built-in spill prevention plate
- Euro Hitch standard. Other Hitches available at cost
Dimensions:
Width = 1,200 mm
Capacity = 0.5 m3
Chute Width = 300 mm
Loaded Weight = 1,380 kg
Unladen Weight = 228 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH CONCRETE KIBBLE BUCKET (1/2 M3)

The Nobili rear mount BP series mulchers are multi-purpose machines ideal for pasture topping with optional hydraulic side shift models.
Suited to tractors up to 150HP with cutting height maintained by working skids.
Specifications:
Connection Type: Linkage
Tractor HP: 100-150 HP
Blades (Cast Hammers): 32
Working Width (mm): 3034
Product Weight (kg): 920
Width / Height / Depth (mm): 2959 / 550 / 1398
Features:
Suggested Use: Grass mowing and green pruning's up to 75mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Control: Fixed headstock or optional hydraulic side shift models.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids
Options:
- Optional model comes with hydraulic side shift
- Semi Swivel Wheels
- Full Width Roller (Standard Version)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 3M BP PASTURE MULCHER (SUIT 100-150HP)

Find Farm Machinery For Sale in Queensland. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

BREVIGLIERI 1.55M B85 ROTARY HOE (MIN 50-90HP)

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

SOUTHERN CROSS AG MACHINERY 6FT FINISHING MOWER, TRIPLE BLADE. SUIT 25-60HP- 6FMOWR

SILVAN R150 FERTILISER SPREADER - SILVAN - BMC-R150

MURRAY 1.72M (2 SECTION) RIGID FRAME STUMP JUMP HARROW

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 26 INCH DISCS - 0965

CELLI 1.85M (55HP GEARBOX) ALPHA ROTARY HOE

POLYMASTER 2,000L RAINWATER TANK & GARDEN PUMP (SLIMLINE)

SILVAN PIUSI K24 DIGITAL DIESEL METER - SILVAN - PF11

ENOROSSI 2.7M SICKLE BAR MOWER (FRONT MOUNT)

HIMAC EURO HITCH CONCRETE KIBBLE BUCKET (1/2 M3)

NOBILI 3M BP PASTURE MULCHER (SUIT 100-150HP)

Farm Supplies Machinery & Equipment

Dealer Address