Farm Supplies Machinery & Equipment

The Cement Mixer can mix anything from cement to fertilizer, it fits quickly and easily to your Digga Planetary Auger Drive. Auger Drive sold separately.
Inclusions - Mixer bowl and hub, drive cradle, foot pin and clip. Purchase frame cradle separately (required).
Features:
- Easy connection: Simply pin cradle to existing auger frame and add mixer bowl. Change from drilling to mixing in under 2 minutes.
- Cement mixing attachment to suit Digga auger drives and frames only.
- Suit: Skid Steer Loaders, Mini Loaders and Tele-Handlers.
- Suits all Digga Auger Drives, Mini Auger Drives and auger drives fitted with Swing Control System.
- New Design with easy connection.
- Maintenance-free.
- Manufactured from quality materials.
Specifications:
Total Capacity * - 110L
Struck Capacity ** - 69L
57mm Square Hub
Length - 1202mm
Width - 1212mm
Height - 1324mm
Width (Bowl Only) - 610mm
Weight Complete with PD3 & Frame - 158 kg
Weight (Bowl and Cradle Only) - 38 kg
(*) An upright position depicts total capacity.
(**) Maximum struck capacity is measured at an angle of 45 degrees. See diagrams.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 110L CEMENT MIXER (WITH 57MM SQUARE HUB)

Aerators relieve soil compaction without damaging the grass you already have and prevent rain runoff on your paddocks. Aeration involves perforating the soil with slots to allow water, air, and nutrients to penetrate down to the grassroots.
Did you Know?
New science has shown that aeration is vital to soil health. Aeration supports the living layer of your soil by creating channels for air and water to feed the aerobic bacteria that live below the surface of the soil. Through aeration, the air is allowed to penetrate the first 100 cm of the soil to support aerobic bacteria growth. Aerobic microbes need air to properly stabilize soil PH and convert organic matter to plant-available nutrients. This microbial activity has been found to increase the water of the soil holding capacity.
Channel and cracks in the soil profile allow rain and irrigation to be easily absorbed by your soil where it's needed instead of running off into the creek. Aeration breaks surface crust and creates deep channels and cracks that drastically increase your soil's ability to absorb moisture. This process helps develop vigorous deep root systems helping your plants become more drought resistant. Deep-rooted plants also have a far greater uptake of minerals and trace elements, ultimately resulting in healthier livestock.
When is the best time to Aerate your Paddocks?
As we all know The best day to plant a tree is... 30 years ago. The second best day is today. It's the same for aeration.
The benefits of aeration are compounded treatment after treatment. we suggest using your Aervator the day it arrives. no matter what time of year that is providing your soil is not waterlogged.
Often we find that annual or biannual use gives the best results though this depends on your soil.
Aussie farmers also use aeration to greatly increase the availability of fertilizer to your plant's root zone by creating a path for the fertilizer to penetrate deep into the soil.
How to aerate using an Aervator?
The rotating tine has a very clean action designed to aerate by opening and shattering the topsoil with minimal damage to existing plants, This action is vertical tillage AKA VerTill.
The Design of the Aervator's tines allows them to twist as they pass through the soil this is intentional. Through this motion, the Aervator is able to shatter the soil, greatly reduce compaction and create pathways for air-water, and nutrients to enter your plants' root zone.
For best results the Aervator requires two factors:
Weight. Weight is built into our heavy-duty, over-spec Australian steel frames. If you find your tines are not fully penetrating the soil you have a compaction issue but don't worry we have you covered, just add our optional concrete blocks and those tines will dig into even the most compact paddocks in as little as two passes.
Speed. The Aervator ideally needs to travel at 7 - 10 kph for the tines to achieve the shattering effect.
Specifications:
Size: 4000mm
Cultivation Width: 3750mm
Transport Width: 2800mm
No. Tines Per Rotor: 4
Mounting: Trailing
Approx Weight: 1200kg+
Min HP Req: 95
Standard Features:
- Hot dipped galv finish
- Two rows of gangs
- Tines are spaced at 95mm
- Large rotor bearings
- Multi-gang system
- Aeration and cultivation settings
- Gang angle adjustable from 0-10 degrees.
- Gang adjusting spanner supplied
- Rear tow hitch
- Cat 1-2 pick up
- Built-in weight trays
Available Configurations:
3PL or trailing
fixed or folding frame
2.4 to 5-meter working width
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES FOLDING 4M - GH-4004 CFT. MIN 95+ HP (3PL)

A horizontal / vertical skidsteer Log Splitter.
This log splitter allows for the splitting of firewood logs up to 20 long (500 mm) with a splitting force of up to 20 tonnes, using a 4 bore cylinder.
Weight = 200kg
Made in Australia.
Optional - Skidsteer Adaptor to suit all 3PL attachments
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHERWOOD SKID STEER LOG SPLITTER

Pyramid Hook Support. Pack of 350.
Specifications:
Size: 45cm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FERNLAND PYRAMID HOOK SUPPORT - 45CM (PACK OF 350)

Southern Cross 4ft Galvanised Slasher - suit 18-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 4 mm deck
- Height adjustable skids with five different cuttings heights
- 45HP Bare-Co gearbox
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Structural integrity located under deck with no impact on material flow
- Bare-Co gearbox / slip clutch safety guarding
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
Specifications:
- Recommended Tractor (HP) - 18-45
- Cutting Width (mm) - 1160
- Overall Width (mm) - 1350
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - Bare-Co B6002
- Blade Tip Speed (m/s max.) - 66
- Deck Thickness (mm) - 4.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO 6 inch slip-clutch and Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Gross Weight - 233kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 4FT GALVANISED SLASHER, SUIT 18-45HP

MR300- MR Series linkage ripper, 3 tyne, 125 x 125 x 9mm toolbar, adjustable height tynes, leading bevel edge profiled tynes.
The Jarrett MR series rippers are designed for larger area general farm ripping and subsoil aerating. The unique optional Mole attachment allows easy poly pipe laying.
Features:
- Robust construction
- Reversible point
- High strength 150x32mm steel tyne(s) with bevelled leading edge
- 125x9mm RHS frame (MR)
Options:
- Ripper mole
- Laying Poly Pipe with the Mole Drainer
Specifications:
- 3 Tynes
- Weight: 310kg
- 60hp min required
- Cat 2
- 1.8m Frame
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS RIPPER 3 TYNE LINKAGE MR SERIES, MIN 60HP - MR300

PTO Bearings.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GARDLOC PLASTIC BEARING SET

Manual Top Link.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK HEAVY DUTY (CAT 28MM / 2) (630MM MIN LENGTH, 895MM MAX LENGTH)

Southern Cross Post Hole Digger - Max 50hp.
Features:
- 6 slip clutch and Bare-Co PTO shaft plus two augers (6 & 12)
- Additional augers are available (9 & 14)
- Augers come with replaceable cutting tips
- Recommended for tractors from 16-50HP
- Drilling depth 40
- Comes with category one pins
- 50HP gearbox, tubular steel boom and yoke
- 3 Year Gearbox warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY POST HOLE DIGGER INC 6" & 12" AUGERS - MAX 50HP

Stabiliser Plate.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX STABILISER PLATE - LINK PLATE, 23MM & 18 X 38MM HOLE DIA

Levelling Box Fork.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO LEVELLING BOX FORK (20.13MM - 515MM FORK SIZE)

Hydraulic Levelling Box (Supplied with: Hoses)
Min. Length: 680mm
Cylinder Bore: 90mm.
Max. Length: 810mm.
Fork CBM - Knuckle Ø25mm.
Suits tractor models shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC LEVELLING BOX (680MM MIN LENGTH) (90MM CYLINDER BORE)

Find Farm Machinery For Sale in Queensland. Browse 7490 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

DIGGA 110L CEMENT MIXER (WITH 57MM SQUARE HUB)

AERVATOR GH SERIES FOLDING 4M - GH-4004 CFT. MIN 95+ HP (3PL)

SHERWOOD SKID STEER LOG SPLITTER

FERNLAND PYRAMID HOOK SUPPORT - 45CM (PACK OF 350)

SOUTHERN CROSS AG MACHINERY 4FT GALVANISED SLASHER, SUIT 18-45HP

JARRETT IMPLEMENTS RIPPER 3 TYNE LINKAGE MR SERIES, MIN 60HP - MR300

GARDLOC PLASTIC BEARING SET

SPAREX TOP LINK HEAVY DUTY (CAT 28MM / 2) (630MM MIN LENGTH, 895MM MAX LENGTH)

SOUTHERN CROSS AG MACHINERY POST HOLE DIGGER INC 6" & 12" AUGERS - MAX 50HP

SPAREX STABILISER PLATE - LINK PLATE, 23MM & 18 X 38MM HOLE DIA

SPENCO LEVELLING BOX FORK (20.13MM - 515MM FORK SIZE)

SPAREX HYDRAULIC LEVELLING BOX (680MM MIN LENGTH) (90MM CYLINDER BORE)

Farm Supplies Machinery & Equipment

Dealer Address