Farm Supplies Machinery & Equipment

Double Round Bale Forks 4x Conus II Tines - 12400mm tine length. 

Features:

- Removable tines
- 3 point linkage mounts
- 4 x Conus 2 tines (1240mm round tines with pointed end)
- 1240mm x 2920mm x 1175mm (LxWxH)
- 265kg

BURDER DOUBLE ROUND BALE FORK 4 X CONUS II TINES -1240MM

35L M series Feed trough. 840mm (3') long x 570mm (22") wide.
Specifications:
Length: 840mm
Width: 570mm
Total height: 180mm
Features:
Strong all-poly construction suitable for corrosive environments
Light weight for ease of handling and relocation
Smooth finish facilitates cleaning
4 sizes to choose from to meet all needs
Covered float prevents stock damage
Peg down points to prevent livestock pushing trough around
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 35L M SERIES FEED TROUGH

Bucket Tooth specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BUCKET TOOTH, CENTRE TOOTH - REPLACEMENT FOR JCB

Counterweights are important in maintaining the stability of the tractor when using front end loaders. With a front end loader fitted onto a tractor, the centre of gravity shifts forward. The centre of gravity is further amplified when the loader lifts a load thus putting pressure on the tyres, axle and rims.

To eliminate such risks, a 3 point linkage should be used. The counterweight is hooked up with a 3 point linkage set behind the rear axle. This is the best method to improve stability and it reduces the amount of pressure placed on the tyres, axle and rims.

BURDER 800KG CONCRETE COUNTER WEIGHT (3PL)

100MM 4 Series auger up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 100MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

Features:
- 500mm Cage Roller
- 300 HP single speed gearbox with rear PTO (1000 RPM).
- 360 - 400cm working widths.
- 6 L blades per flange.
- Side gear drive (dual drive)
- 1 3/4" 20 spline PTO with cam clutch.
- CE safety guards.
- Floating front hitches
- Rear door with spring & pin adjustment.
- Cat III (Suited to ASAE quick hitch).
- Wheel track eradicators
Specifications:
- Connection Type: Linkage.
- Min PTO HP: 150-300 HP
- Working Width (mm): 3,570
- Total Width (mm): 3,930
- PTO rpm: 1,000
- Rotor RPM: 239 rpm
- Working Depth (mm): 100-300
- Blade Qty and Type: x84 L Blades
- x6 L blades per flange.
- Product Weight (kg): 2,180
Optional: B8201366 - Pair of Side Discs
Note: An additional surcharge of $550.00 may apply for machinery assembly.
Dual drive fixed rotary hoes designed for large farms and contractors. The B300DT features DuoCone seals and Hardox steel rotor flanges for durability.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 3.6M B300DT ROTARY HOE INC PACKER ROLLER (300HP GEARBOX)

Rasspe Radura Hay Tine Holder specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA HAYTINE HOLDER COMPLETE REPLACEMENT FOR NIEMEYER

Mulchers with a broad range of potential uses, ideal for the shredding of pruning residues, vine-cuttings, plant remains, bushes, grass.
Also ideal for the upkeep of roadsides, the maintaining of non-seeded areas, pastures and hunting grounds.
The VKM 210, 240, 280 and 305 series is equipped with mechanical or hydraulic axial side shift and wheels (or roller) with removable bottoms placed behind the rotor, to prevent the flattening of the chopped product.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540/1000
Tractor horse power HP: 90-150, KW: 66-110
Cast Hammer Blade: 28
Working Width: 2793mm
Weight: 960kg
Features:
Suggested Use: Grass and green pruning's to 90mm diameter.
Construction: Medium profile body and one mulching bars.
Control: Hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced 8 row rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Roller with removable ends (standard fitment).
Options:
- Left hand offset
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.8M VKM MULCHER (SUIT 90-150HP)

Lower Link Dual Category Ball (Cat. 2 Outer, 1/2 Inner).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOWER LINK DUAL CATEGORY BALL (CAT 2 OUTER, 1/2 INNER) (ID: 7/8 - 1 1/8'')

Tedder haytine.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GRANGE & WALTER TEDDER HAY TINE (LH) - 393MM LENGTH - REPLACEMENT FOR KRONE

GRANGE & WALTER TEDDER HAY TINE (RH) - 379MM LENGTH - REPLACEMENT FOR LELY

Powertech Core Drill 352
The PCD-352 diamond core drill motor is our largest commercial-grade unit capable of drilling up to 402mm in reinforced concrete with rebars. With German design and technology, this rig-mounted model is a serious kit when paired with PDS-352 Core Drill Stand.
This unit also contains an LCD display for temperature, current, voltage, overload protection and carbon brush replacement.
Perfect for a range of construction, pool fencing, plumbing, electrical, gas installation and building applications. capable of coring into concrete, asphalt, masonry, brick walls and stone.
Main features:
3-speed Gear Regulation: Three operating speeds for different core drilling diameters. No load speed 350RPM - 400mm, No load speed 700RPM - 200mm, No load speed 1100RPM - 100mm.
Electronic Smart Control: Our motor is equipped with Soft Start, PRCD and Overloading protection. Soft start helps the motor start slowly and then reach no load speed in a few seconds.
External Carbon Brushes: No complex replacement of carbon brushes, our carbon brushes are inserted in the shell for easy change out.
KHGEARS Gears: Polished gears with high abrasive resistance provide better cooling and increase motor durability.
Mounting holes distance 79 x 41mm: This is a standard size for most leading core drill brands in Europe.
Our core drill motor (stand) can be used with other Europe brands without changes.
Specifications
Power 3,300 W
Voltage 220 V
Current/Frequency 15A / 50Hz
The Drilling Diameter of 1,2,3 Gear 402mm/202mm/102mm
No load speed 350/700/1100 RPM
Max.ø concrete 402 mm
Spindle thread 1-1/4" UNC
N.W 13.5 kg
Drill Stand for Option DSP-352
Packing List 635*460*215mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POWERTECH CORE DRILL 352D

Find Farm Machinery For Sale in Queensland. Browse 7626 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

BURDER DOUBLE ROUND BALE FORK 4 X CONUS II TINES -1240MM

RAPID PLAS 35L M SERIES FEED TROUGH

SPAREX BUCKET TOOTH, CENTRE TOOTH - REPLACEMENT FOR JCB

BURDER 800KG CONCRETE COUNTER WEIGHT (3PL)

DIGGA 100MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

BREVIGLIERI 3.6M B300DT ROTARY HOE INC PACKER ROLLER (300HP GEARBOX)

RASSPE RADURA HAYTINE HOLDER COMPLETE REPLACEMENT FOR NIEMEYER

NOBILI 2.8M VKM MULCHER (SUIT 90-150HP)

SPAREX LOWER LINK DUAL CATEGORY BALL (CAT 2 OUTER, 1/2 INNER) (ID: 7/8 - 1 1/8'')

GRANGE & WALTER TEDDER HAY TINE (LH) - 393MM LENGTH - REPLACEMENT FOR KRONE

GRANGE & WALTER TEDDER HAY TINE (RH) - 379MM LENGTH - REPLACEMENT FOR LELY

POWERTECH CORE DRILL 352D

Farm Supplies Machinery & Equipment

Dealer Address