Farm Supplies Machinery & Equipment

This heavy duty professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive blead for displaced roller towards the back, starting from model 2016.
Second Patened removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M 220 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

Front or Rear Mounting for Tractors up to 90HP
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 220 MULCHER FRONT OR REAR MOUNTING

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BALE FRAME - 2 X M22 X 1,100MM - CONUS 1 TINES

Electric start.
This 7kVA Generator is the perfect size for almost everything, with 2 x 15 amp outlets, and Honda Australia Approved GX390 engine, this generator will run your power tools, small compressor, and much much more.
Searching for a tough, economical generator for around the farm or jobsite? Your search stops here. This workhorse combines the reliability and power of a Honda engine with the durability of a Gentech design. The Honda GX390 engine delivers more power, quieter performance and lower fuel consumption. The result is 7 kVA portable power suitable for hand tools and small to medium work appliances. A good size for drills, smaller welders, saws, pressure washers, small to medium pumps etc.
With fuel economy of 2.6 litres per hour, the 6.5 litre fuel tank delivers 2.5hours of operation at 80% load. A recoil start, double 15 Amp outlet panel and great optional accessories complete the package. This generator is the real deal for farming and trade use; backed by a national service support network.
The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 4 year warranty.
Specifications:
Power Rating: 7 kVA
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil & Electric
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.60 L/hr
Operation Hours @ 80% Load: 2.50 hrs
Fuel Type: Petrol
Diam.: 735 x 545 x 525 mm (L x W x H)
Weight: 80 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

Powered by the advanced four-stroke Honda GX390 engine, this generator is ready to deliver three phase power wherever and whenever you need it.
The Gentech 7kVA features a 6.5-litre fuel tank for a 2.5 hours continuous operating time, as well as the convenience of 3 phase 20 amp 5 pin outlets.
Boasting Hondas legendary fuel economy and reliability, its no wonder this is such a popular choice for farmers and builders who need more power for less. The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 3 year warranty.
Specifications:
Power Rating: 7 kVA
Cont. Output Watts: 6000
Engine Model: Honda GX390
Phase: 3-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.1 L
Noise Level @ 7m: 69 dBA
Outlets: 1 x 3 phase, 2 x 1 p
Approx. Fuel Consumption @ 80% Load: 2.44 L/Hr
Operation Hours @ 80% Load: 2.5 hrs
Fuel Type: Unleaded
Diam.: 735 x 545 x 545 mm (L x W x H)
Weight: 80 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA PETROL GENERATOR (415V ENGINE POWERED)

500L Mineral Feeder with Rotating Poly lid
Specifications:
Diameter: 2400mm
Livestock type: cattle
Features:
Durable roof with substantial overhang to protect feed from the elements
Raised Tub for extra feed protection
Laterally opening lid for easy filling and to prevent injury and back strain. Removes the danger of the lid falling when refilling tub
Lid can be assembled to open to the left or the right
Lid latches in closed position to prevent stock moving it to the open position
Patented Design
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 500L MINERAL FEEDER WITH ROTATING POLY LID

PTO Tube Yoke.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO TUBE YOKE (U/J SIZE: 27 X 70MM) - LEMON PROFILE - 40 X 34.5 X 4MM TUBE SIZE

Loader Tine specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE - CRANKED, 820MM LENGTH, M20 X 1.5 THREAD (H-FLUTED)

Specifications:
Capacity: 5,000L
Style: Slimline
Diameter: 3320mm
Width: 1040mm
Inlet height: 2020mm
Total height: 2020mm
Catchment Size (m2): from 11 to 20, from 21 to 30
Features:
* 4 x Hand-grips to make it easier to handle
* 2 x Inlet Strainers (1 either end for versatility)
* 2 x 1" Outlets (1 either end)
* 1 x 90mm Overflow supplied - (position at either end)
* 1 x ¾ tap supplied
* Lifting lugs enable tank to be craned into restricted spaces

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 5,000L SLIMLINE RAINWATER TANK

The JACKY Mini Storage Silos and Hoppers are the ideal solution for stationary storage of smaller quantities of grain and feed.
Complete with our unique rustproof discharge system, these hopper units help to protect valuable contents (grain, feed etc.) against vermin and weather damage.
The elevated storage hopper allows you to fill buckets or containers directly from the mini silo.
Australian made and owned.
Specifications:
Capacity (kg): 1,000
Length (mm): 1,180
Width (mm): 1,180
Height (mm): 2,300
Benefits:
- 1,500 litre capacity.
- Safe Working Load (SWL) - 1,200kg.
- Centre discharge hopper.
- UV stabilised polyethylene and stainless steel construction.
- Heavy-duty galvanised steel frame ensures longevity.
- Overall dimensions 1160 x 1160 x 2450mm H
- Slide on lid design for weather resistance.
- Standard colour is Faint Green
- Serial numbering and custom branding available.
Options:
- Raimo bulk bag dispenser
- Reaper knife blade
- Document holder heavy duty
- Tine pocket 1,000mm (folded 200mm x 100mm)
- Transition nozzle piece
- Actuator kit 12 volt
- Clear sightglass point in face of Jacky bin
- Hatch assembly
- Garnet outlet
- Base poly
- Lid to suit
- Eurohitch attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JACKY STORAGE 1,500L RAISED CENTRE DISCHARGE MINI SILO (STEEL BASE)

Triangular Bowsaw - 53cm.
The BA3322151 belongs to the Force range. Triangular frame with a plastic knuckle guard which protects fingers from branches while in use. Length 530mm.
Features:
- Fitted with knuckle guard & blade protector
- High quality, strong and lightweight steel frame.
- Hard point blade.
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BAHCO TRIANGULAR BOWSAW - 53CM

Hedge Shear - 75cm
Weight - 1085g
The BAP51F are high-quality shears for professional use in parks, vineyards, estates and particularly for topiary art work.
Partly serrated edge for cutting up to 15mm thick branches.
Reduced fatigue through superior cutting performance.
Comfortable oval steel handles.
Also available with telescopic handles.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BAHCO HEDGE SHEAR - 57CM

Find Farm Machinery For Sale in Queensland. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

MUTHING MU-M 220 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

MUTHING MU-O 220 MULCHER FRONT OR REAR MOUNTING

SPAREX BALE FRAME - 2 X M22 X 1,100MM - CONUS 1 TINES

GENTECH 7 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

GENTECH 7 KVA PETROL GENERATOR (415V ENGINE POWERED)

RAPID PLAS 500L MINERAL FEEDER WITH ROTATING POLY LID

SPAREX PTO TUBE YOKE (U/J SIZE: 27 X 70MM) - LEMON PROFILE - 40 X 34.5 X 4MM TUBE SIZE

SHW LOADER TINE - CRANKED, 820MM LENGTH, M20 X 1.5 THREAD (H-FLUTED)

RAPID PLAS 5,000L SLIMLINE RAINWATER TANK

JACKY STORAGE 1,500L RAISED CENTRE DISCHARGE MINI SILO (STEEL BASE)

BAHCO TRIANGULAR BOWSAW - 53CM

BAHCO HEDGE SHEAR - 57CM

Farm Supplies Machinery & Equipment

Dealer Address