Farm Supplies Machinery & Equipment

Jarrett Redback Series Slasher 1.5m - 75hp
- Hi-speed gearbox, centre/offset.
- 5mm body and 6mm front and rear apron.
- 6mm x 200 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 5
Total width (mm) - 1650
Cutting width (mm) - 1500
Total weight (kg) -395
Gearbox hp/(kw)- 75/(56)
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 16,400(85)
Options:
- Solid Rubber Single Wheel Kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.5M (75HP)

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HD BIG SQUARE BALE FRAME - 4 X M28 X 1,100MM (CONUS 2) - 2,000KG LOAD CAPACITY

Professional compact tractors. Tractors up to 75hp require efficient, versatile and robust flail mulchers to carry out mowing and mulching work reliably, quickly and economically.
At the same time the equipment should be light so as not to restrict the scope of the system vehicles.
The MU-E mulcher series was created for this range of tractors. A range of options, additional equipment, low weight and strong construction are the typical attributes of this versatile range of mulchers.
Features:
Manufactured from High Quality QST/E Steel
Headstock Cat. I + II for Rear mounting
Mountable in two positions variable by 30cm (Offset)
Gearbox with integrated over run clutch and through drive 540 RPM. or 1000 RPM
Belt protection with tension measuring slot
Stand
High tempered M Hammer flails
Smooth running Spiral rotor with specially formed lugs
Patented removable shredding bar System: Shark Fin
Roller to carry the flail, adjustable for different heights
High tempered spring steel one way protection flaps in front of the mower
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
P.T.O. shaft and Guarding to ISO Standards
Independently tested and certified for Thrown Objects.
Options:
Modification 540 to 1000 RPM (+ labour charge)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING ECOTOP 160 MULCHER (OFFSET 16CM) SUITS 30-75HP

Lower link implement pin (16mm x 102mm),
Thread size 5/8'' x 57mm
Cat. 0
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX 16 X 102MM LOWER LINK IMPLEMENT PIN (CAT 0, THREAD SIZE: 5/8" X 57MM)

A 20L self-contained compact portable sprayer with its own power supply. Compact design but heavy duty construction frame with removable handle and extra wide wheels and solid metal axle.
It has a 12V Smoothflo pump, 7 litres per min open flow (max 120psi) with Spotspray Jolly gun, adjustable nozzle and 6M of hose.
Features:
- Portable sprayer with its own 12V battery
- heavy duty construction frame with removable handle
- impact resistant polyethylene UV stabilised tank
- 240V battery recharger
- smoothflo 12V diaphragm pump max 7L/min open flow 120psi
- pressure regulator to accurately apply chemicals
- spotjet 600mm stainless steel lance with 6m hose and adjustable nozzle
Options:
WP2-T - optional boom
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 20L RECHARGEABLE UPRIGHT TROLLEY SPRAYER

PTO Adaptor.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO ADAPTOR WITH CLAMP BOLT - 1 3/4" FEMALE SPLINE, 20 X 1 3/8" MALE SPLINE

Electric start.
This 7kVA Generator is the perfect size for almost everything, with 2 x 15 amp outlets, and Honda Australia Approved GX390 engine, this generator will run your power tools, small compressor, and much much more.
Searching for a tough, economical generator for around the farm or jobsite? Your search stops here. This workhorse combines the reliability and power of a Honda engine with the durability of a Gentech design. The Honda GX390 engine delivers more power, quieter performance and lower fuel consumption. The result is 7 kVA portable power suitable for hand tools and small to medium work appliances. A good size for drills, smaller welders, saws, pressure washers, small to medium pumps etc.
With fuel economy of 2.6 litres per hour, the 6.5 litre fuel tank delivers 2.5hours of operation at 80% load. A recoil start, double 15 Amp outlet panel and great optional accessories complete the package. This generator is the real deal for farming and trade use; backed by a national service support network.
The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 4 year warranty.
Specifications:
Power Rating: 7 kVA
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil & Electric
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.60 L/hr
Operation Hours @ 80% Load: 2.50 hrs
Fuel Type: Petrol
Diam.: 735 x 545 x 525 mm (L x W x H)
Weight: 80 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

NorthStar battery leads / wiring harness for all units.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NORTHSTAR BATTERY LEADS / WIRING HARNESS (FOR ALL UNITS)

100mm - 1 Series Auger for 1 Man Borer.
Light conditions - Earth.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl 1 man Style
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 100MM AUGER (LIGHT- EARTH) FOR 1 MAN BORER

Ruibig Safety Linch Pin.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX RUIBIG SAFETY LINCH PIN (9.5MM PIN DIA, 46MM TOTAL LENGTH)

400mm 4 Series Auger up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

250mm 4 Series Auger (Heavy conditions - (MFT) Multi Facet Tungsten-Hard Ground) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger, drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 250MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

Find Farm Machinery For Sale in Queensland. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.5M (75HP)

SPAREX HD BIG SQUARE BALE FRAME - 4 X M28 X 1,100MM (CONUS 2) - 2,000KG LOAD CAPACITY

MUTHING ECOTOP 160 MULCHER (OFFSET 16CM) SUITS 30-75HP

SPAREX 16 X 102MM LOWER LINK IMPLEMENT PIN (CAT 0, THREAD SIZE: 5/8" X 57MM)

SILVAN 20L RECHARGEABLE UPRIGHT TROLLEY SPRAYER

SPAREX PTO ADAPTOR WITH CLAMP BOLT - 1 3/4" FEMALE SPLINE, 20 X 1 3/8" MALE SPLINE

GENTECH 7 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

NORTHSTAR BATTERY LEADS / WIRING HARNESS (FOR ALL UNITS)

DIGGA 100MM AUGER (LIGHT- EARTH) FOR 1 MAN BORER

SPAREX RUIBIG SAFETY LINCH PIN (9.5MM PIN DIA, 46MM TOTAL LENGTH)

DIGGA 400MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

DIGGA 250MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

Farm Supplies Machinery & Equipment

Dealer Address