Farm Supplies Machinery & Equipment

1.8mm Zinc Aluminium Coated Clips - 10 000 in a box.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MARCHANT ENGINEERING PTY LTD 1.8MM ZINC ALUMINIUM COATED CLIPS

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

22.7LPM (12 Volt DC) Jabsco Hot Shot Washdown Kit
These are a versatile, top quality, 70psi High Pressure Washdown Pump Kit, which includes the pump, spray nozzle gun and inlet strainer. Pump has sealed Pressure Switch, and heavier duty motor brushes for extended life. Marine Ignition Protection ISO8846. Colour boxed, for Showroom point-of-sale appeal.
Very useful as multi-purpose Washdown pump kits for Off-Road Vehicles, Agriculture Equipment, Service Utilities, Boats, Horse wash-down etc.
Specifications:
N/S/E wetted materials, max. 18 amps .
Max. Flow 22.7 Lpm, 70psi pressure switch.
Includes Pump, Spray nozzle gun, Inlet Strainer,
2 x Straight 5-Chamber Snap-Fit/ 3/4" Hose barb
ports, and 2 x 5-Chamber Snap-Fit 3/4" Elbow Hose
barb port.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JABSCO 22.7LPM (12 VOLT DC) HOT SHOT WASHDOWN KIT - P601J-219N-3A

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 12
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.2M S-TINE (12 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 24HP

The Skid Steer attachment offers the flexibility to enable any Munro Post Driver to be installed on a wide variety of Skid Steer vehicles.
* If purchasing a Munro Skid Steer Attachment, please contact us to advise us on which make of Skid Steer you intend to mount the Attachment and your post driver to.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO SKID STEER ATTACHMENT PLATE (ONLY) TO SUIT MULTISETT / TELESETT / AUTODRIVER

Universal 400 rakes, teds, windrows and spreads, all in one machine. This machine has been studied to meet the most advanced requirements in haymaking. Through simple adjustments you can make it suitable for all working conditions and it is very easy to operate.
Furthermore, due to the pivoting wheels under the rotors, Universal 400 follows the tractor movements. The working width can be adjusted by extending the frame from a min. width of 3.1m up to a max. width of 4m.
For transport the machine is folded up to 2.25m width.
When spreading the tine arms are locked. When windrowing the tine arms are unlocked, i.e. they are set in the cam. To change from spreading into windrowing and vice versa it takes only a few minutes and it can be done on the field.
The machine is fitted with wider tires to increase ground adherence, particularly on rough terrain.
Specifications:
Working Width: 3.1 - 4m
Transport Width: 2.25m
Weight: 420kg
Features:
Application: Suitable for tedding, windrowing and spreading hay crops.
Construction: Simple robust construction requiring minimal maintenance.
Drive Line: PTO drive at 540rpm (min. 25HP required).
Control: Tractor three point linkage.
Ground Wheels: 2 x 15/6.00
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SITREX 3.1-4M TEDDER RAKE (MIN 25HP)

Ideally suited for a variety of farming purposes including digging post holes and tree planting on lifestyle, medium acreage, broadacre, viticulture and horticultural farms.
Note: Augers are NOT supplied with the Post Hole Digger
Specifications:
Connection Type: Linkage
Min PTO HP: 75
PTO: 40 - 75HP: Series 4.
Product Weight (kg): 126
Gearbox Ratio: 23.18:1 clockwise rotation.
Clutch: 2 x 150mm friction plates (40/50HP), 2 x 200mm friction plates (75HP).
Main Frame: 75 x 75 x 4mm RHS (158PHD30), 100 x 100 x 5mm RHS.
Moutning: Cat. I TPL with Cat. II bushes supplied.
Effective Digging Depth: 1m.
Options:
DCA6 - 6"auger
DCA8 - 8" auger
DCA10 - 10" auger
DCA12 - 12" auger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 75HP POST HOLE DIGGER (AUGERS NOT INCL)

Jarrett Redback Series Slasher 1.8m - 100hp
- Hi-speed gearbox, centre/offset.
- 5mm body and 6mm front and rear apron.
- 6mm x 200 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 1950
Cutting width (mm) - 1800
Total weight (kg) -520
Gearbox hp/(kw)- 100/(75)
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 19,600(100)
Options:
- Solid Rubber Twin Wheel Kit (75hp gbox)
- Super Series Solid Rubber Single Wheel Kit (75-150hp)
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 100HP - RB6-100

The ideal road grading blade for 100 HP tractors.
Features:
Hydraulic angle using the famous Berends patented swivel turntable system.
Hydraulic tilt adjustment.
Manual offset with optional hydraulic adjustment.
Over 6m in length.
Weight approximately 2000kg with provision for water ballast to be added.
Optional linkage hitch available.
Main beam 250 x 250 x 12.5mm rhs.
10mm mouldboard with 500mm clearance with correct curvature for road grading.
Fitted with reversible hardened cutting edge.
Wheelkit consists of 4 Landcruiser wheels with hydraulic lift.
Also Available:
0427 12ft trailing Grader with hyd angle, tilt and wheellift no offset (fixed)
0428 12ft trailing Grader with hyd angle, offset, tilt and wheellift
Options:
0426 Optional Offset ram and hoses
0429 Optional Angle Ram Relief Valve
0420 Boxed ends suit all HD, EHD and Hydraulic model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GRADER BLADES TRAILING MODEL 10FT (3M) - 0425

Murray heavy duty adjustable single tine ripper.
Features:
- Cat II & III
- Comes with pins
- Adjustable depth of 210-360mm
- Australian made
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY ADJUSTABLE HEAVY DUTY SINGLE TINE RIPPER

A light duty dual mount slasher for grass and light work. Ideal for compact tractors. Available in 3ft 4in (1.0m) and 3ft 10in (1.2m) sizes.
Features:
Body designed with 3mm top plate and strong 6mm thick adjustable skids.
Italian made Bondioli & Pavesi Series 2 pto driveshaft with shearbolt protection rated
at 900NM. Optional 2 plate slip clutch with Series 4 shaft. (The clutch is standard on
the TA135 and TA150 models)
Cat 1 linkage with both offset and centre mount positions.
Hardened and tempered stepped/bushed slasher blades.
Standard with full length hinging rear steel stone flap and front rubber guard.
Adjustable skids have cutting height range of 25 100mm.
40 HP oil lubricated gearbox.
Floating headstock.
Document holder fitted.
Full 12 month warranty on design and manufacture.
Models:
0350 TA100
Cutting Width 1030mm
Overall Width 1120mm
Overall Length 1120mm
Tractor HP 18-30
Cutting Height 25-100mm
Weight 180kg
0351 TA120
Cutting Width 1170mm
Overall Width 1270mm
Overall Length 1270mm
Tractor HP 20-35
Cutting Height 25-100mm
Weight 195kg
0349 TA135
Cutting Width 1360mm
Overall Width 1460mm
Overall Length 1470mm
Tractor HP 25-45
Cutting Height 25-100mm
Weight 225kg
0364 TA150
Cutting Width 1460mm
Overall Width 1560mm
Overall Length 1580mm
Tractor HP 25-50
Cutting Height 25-100mm
Weight 245kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1M LIGHT DUTY SLASHER - 0350 - SUIT UP TO 40HP

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils .
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 1200 AERATORS - SINGLE ROTOR - 0163

Find Farm Machinery For Sale in Queensland. Browse 7624 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

MARCHANT ENGINEERING PTY LTD 1.8MM ZINC ALUMINIUM COATED CLIPS

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

JABSCO 22.7LPM (12 VOLT DC) HOT SHOT WASHDOWN KIT - P601J-219N-3A

JOHN BERENDS 1.2M S-TINE (12 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 24HP

MUNRO SKID STEER ATTACHMENT PLATE (ONLY) TO SUIT MULTISETT / TELESETT / AUTODRIVER

SITREX 3.1-4M TEDDER RAKE (MIN 25HP)

SILVAN 75HP POST HOLE DIGGER (AUGERS NOT INCL)

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 100HP - RB6-100

JOHN BERENDS GRADER BLADES TRAILING MODEL 10FT (3M) - 0425

MURRAY ADJUSTABLE HEAVY DUTY SINGLE TINE RIPPER

JOHN BERENDS 1M LIGHT DUTY SLASHER - 0350 - SUIT UP TO 40HP

JOHN BERENDS GROWMASTER 1200 AERATORS - SINGLE ROTOR - 0163

Farm Supplies Machinery & Equipment

Dealer Address