Farm Supplies Machinery & Equipment

Champion 5,500 LBS ATV Winch including...
Synthetic Rope
Hawse Fairlead
Mounting Plate
Mini-Rocker Switch
Contactor
Battery Cables and Hardware
The Champion XL ATV/UTV winch has a 5500-lb. rated line pull, a gear reduction ratio of 166:1, plus a rocker switch and free-spooling clutch to make your experience with this winch even easier. With a tough 1.7-horsepower (12-volt) DC motor, this winch is your perfect heavy-duty tool.
The Champion Power Equipment 500723 5500-lb. ATV/UTV Winch includes everything you need to start winching.
With a rated line pull of 5500 pounds, mount this winch on your ATV or side by side with the included mounting plate to quickly harness the strength of its 1.7-horsepower (12-volt) DC permanent magnet motor.
Made from hi-tech polyethylene, the high flexibility and low weight of synthetic rope prevent kinking, plus it wont fray or curl.
Synthetic rope stores less kinetic energy and will not recoil with as much force as steel, and if it breaks, it can be repaired in the field and floats, so water recovery is easier. Since its free of wire splinters or burrs often found in steel rope, theres less chance of injury.
Designed with a stainless steel thimble and protective sleeve, the 50-foot by 3/16-inch synthetic winch rope is guided onto the drum through the fairlead. Featuring a black anodized finish, the lightweight aluminium hawse fairlead is precisely machined to maximize the life of the synthetic rope. Features a positive battery cable with a built-in, self-resetting circuit breaker designed to protect the winch motor from an overweight pull or extended full-weight pull failures.
The three-stage planetary gear system, along with the handlebar-mounted remote control and free-spooling clutch, offers excellent control while winching. With a gear reduction ratio of 166:1, the winch boasts a line speed of 2.0 feet per minute with a full load and 12.8 feet per minute without load.
The drum measures 2.0 by 3.2 inches, and accompanied by the heavy-duty clevis hook and handy strap, this compact and lightweight tool is anything but a lightweight when it comes to power. Offering much more than a motor and a spool of rope, the Champion 5500-lb. winch kit is a necessary tool for any situation you might encounter.
IP68 Water and Dust Proof Rated, Champion Support and our nationwide service centres will back up your purchase with a 2-year limited warranty and FREE lifetime technical support.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change. E & OE.

POWERTECH CHAMPION 5,500 LBS ATV WINCH (APPROX 2.5T)

The Deep Tillage plough is designed for shattering compact ground with minimal disturbance to the sub soil.
Ideal for ripping hard ground prior to cultivation and for aerating pastures, therefore increasing water absorption and improving the profile of the soil.
Can be used to renovate pastures or for bed renovation. Broad acre application and row cropping. High tensile cast shank assembly with 24 underframe clearance with 1 shear pin protection.
Replaceable points and shin guards, also available with tungsten tips.
Optional crumbler rollers also available to help create a level surface and reduce crusting in the surface.
Optional coulters available to reduce surface disturbance in pasture (must be ordered with machine).
Specifications:
Heavy duty 100 x 100 x 9mm tine mounting frame.
High tensile cast shank assembly with 24in (610mm) underframe clearance with 1in shear pin protection. Replaceable points and shin guards also available with tungsten tips.
Breakout force approx. 4000 ft. / lbs.
Tine spacing set at 12in (300mm).
Approx 15HP required per tine.
Adjustable pair of Holden wheel for depth control available as an option.
Optional coulters available to reduce surface disturbance in pasture.
Available in 2, 3, 5, 7, 9 or 11 tine models with other sizes made on request. 2 and 3 tine models are fitted on a single row frame. Trailing units also available.
Options:
0327 14in Coulters (must be ordered with machine) priced per coulter unit.
0355 Optional Hydraulic Phasing Cylinders to replace ratchets.
0200 Depth Wheels (Pair Holden) optional normally mounted outside frame.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS DEEP TILLAGE PLOUGHS 3 TINE - 0323, MIN 45HP

Medium duty rotary hoe suitable for tractors up to 120hp.
Specifications:
Actual Width: 332cm
Working Width: 310cm
Required HP: 100-120hp
Weight: 880kg
No of Blades: 72
Features:
Rated up to 120hp
PTO 540rpm 4 speed gearbox (155-180 models)
PTO 1000rpm 2 speed gearbox (205-305 models)
Swinging lower links
Gear side drive
80x7mm L blades
6 blades per flange
250mm working depth
Side skids
Adjustable scroll tailgate
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike rotor (30x30x170mm spikes) c/w 2 piece adjustable tailgate (180-305 only)
Anti-pan (straight blade) rotor c/w 2 piece adjustable tailgate (180-305 only)
Roller Options:
Cage Roller (385mm diameter)
Ergon 155 = 860kg with roller
Ergon 180 = 880kg with roller
Ergon 205 = 920kg with roller
Cage Roller (440mm diameter)
Ergon 230 = 980kg with roller
Ergon 255 = 1050kg with roller
Ergon 280 = 1110kg with roller
Ergon 305 = 1180kg with roller
Packer Roller (420mm diameter)
Ergon 155 = 920kg with roller
Ergon 180 = 1000kg with roller
Ergon 205 = 1080kg with roller
Packer Roller (470mm diameter)
Ergon 230 = 1160kg with roller
Ergon 255 = 1240kg with roller
Ergon 280 = 1300kg with roller
Ergon 305 = 1380kg with roller
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models
ERGON120-155 160cm Working width 60-120hp 600kg 36 Blades
ERGON120-180 185cm Working width 70-120hp 650kg 42 Blades
ERGON120-205 210cm Working width 75-120hp 690kg 48 Blades
ERGON120-230 235cm Working width 80-120hp 733kg 54 Blades
ERGON120-255 260cm Working width 85-120hp 770kg 60 Blades
ERGON120-280 285cm Working width 90-120hp 800kg 66 Blades
ERGON120-305 310cm Working width 100-120hp 880kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.1M (100-120HP) ERGON ROTARY HOE

Hydraulic Top Link (Cat.4/4) Knuckle and Q.R CBM Hook
Cylinder Bore: 120mm
Min. Length : 760mm.
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC TOP LINK (CAT 4/4) (120MM CYLINDER BORE) (760MM MIN LENGTH)

Jarrett Redback Series Slasher 2.1m -100hp
- Lo-speed gearbox, centre/offset.
- 6mm body and 6mm front and rear apron.
- 6mm x 250 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 2200
Cutting width (mm) - 2100
Total weight (kg) -660
Gearbox hp/(kw)- 100/(75)
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 17,300(88)
Options:
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 100HP - RB7-100

Linkage Drawbar (Cat. 2) No. holes: 9.
Specifications:
Category: 2
Linch pin diameter (mm): 11
Hole diameter (mm): 25
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LINKAGE DRAWBAR (CAT 2) (9 HOLES) 25MM HOLE DIA

Stabiliser Chain.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX STABILISER CHAIN - 16MM PIN DIA, 495MM MIN LENGTH

Stabiliser Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX STABILISER PIN - 12MM HOLE DIA, 22MM PIN DIA, 7/16" UNF THREAD

Reversible Plough Point specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX REVERSIBLE LH PLOUGH POINT (KVERNELAND)

Ideal for shearing sheds, farm machinery sheds, workshops, work garages, retail shops, patios, outdoor events and marquees.
The Float valve controls water level when connected to a tap.
Electric level sensor to indicate when water empty.
Specifications:
Product Weight (kg): 43
Height / Width / Length (mm): 1440 / 580 / 925
Motor: 440W, 230volt Electric motor
Max Air Flow: 12,000 m 3/hr
Effective Area: 70 -100m2
Features:
- 440W, 230volt electric motor
- Max Air Flow 12,000m 3/hr
- Effective area 70-100m2
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 70L (440W) EVAPORATIVE AIR COOLER

Series 23 Small Acreage Chain Harrow. (1.22m x 0.76m)
Designed to be operated via UTV, 4WD or ride on Mower.
Specifications:
- Available in 0.76m (26) depth
- High Carbon 10mm Square Steel
- Weight: 78kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SMALL ACREAGE CHAIN HARROW (1.22M X 0.76M) - SERIES 23

RCD PACK -3.4 kVA portable generator powered by Honda petrol engine. Featuring Worksafe aproved RCD protected outlets.
Newly designed frame
2 x 15 Amp IP56 RCD protected outlets
With these features, using your gentech generator on a work site will be a breeze. The RCD protected outlets are work safe approved and comply with Australian Standards. This hard working, light weight generator is ideal for small appliances (e.g. TVs, bar fridges) and small hand tools (e.g. drills and jigsaws).
Specifications:
Power Rating: 3.4 kVA
Model Rating 0.8pf @ 50Hz: 3.4kVA
Engine Model: Honda GX200
Phase: 1-Phase
Starting System: Recoil
Noise Level @ 7m: 67 dBA
Outlets: RCD protected 15Amp
Approx. Fuel Consumption @ 80% Load: 1.34 L/hr
Operation Hours @ 80% Load: 2.32 hrs
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 3.4 KVA RCD PETROL GENERATOR

Find Farm Machinery For Sale in Queensland. Browse 7618 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

POWERTECH CHAMPION 5,500 LBS ATV WINCH (APPROX 2.5T)

JOHN BERENDS DEEP TILLAGE PLOUGHS 3 TINE - 0323, MIN 45HP

CELLI 3.1M (100-120HP) ERGON ROTARY HOE

SPAREX HYDRAULIC TOP LINK (CAT 4/4) (120MM CYLINDER BORE) (760MM MIN LENGTH)

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 100HP - RB7-100

SPAREX LINKAGE DRAWBAR (CAT 2) (9 HOLES) 25MM HOLE DIA

SPAREX STABILISER CHAIN - 16MM PIN DIA, 495MM MIN LENGTH

SPAREX STABILISER PIN - 12MM HOLE DIA, 22MM PIN DIA, 7/16" UNF THREAD

SPAREX REVERSIBLE LH PLOUGH POINT (KVERNELAND)

SILVAN 70L (440W) EVAPORATIVE AIR COOLER

MURRAY SMALL ACREAGE CHAIN HARROW (1.22M X 0.76M) - SERIES 23

GENTECH 3.4 KVA RCD PETROL GENERATOR

Farm Supplies Machinery & Equipment

Dealer Address