Farm Supplies Machinery & Equipment

3,000L Turbo Scram Trailed 2 Row Turbowrap: Includes sprayheads 4 x 320mm fans, Hydraulic drive stainless steel pump, automatic spray rate controller, self-contained hydraulic drive system, tandem suspension axle.
Specifications:
Market: Horticulture.
Tank Size (L): 3,000
Connection Type: Trailed
Min PTO HP: 65
Pump Size (L/min): 350
Height / Width / Length (mm): 3480 / 1755 (less head), 2576 (folded) / 4850
Product Weight (kg): 1,500 (dry)
Application: Vineyards
Features:
Head: Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Three row spraying head: 42 venturi air shear adjustable nozzles with individual metering and on/off taps. Left & right arms are independent hydraulic folding with adjustable width & centre frame. Boom frame is galvanised.
Pump: Stainless steel, hydraulic drive centrifugal pump, 350 L/min. Stainless steel shaft and Viton/ceramic seal. Driven by tractor remotes.
Fan Size: 320 mm turbine fan, one per air tube, 3600 rpm. Power consumed 29 kw / 38HP
Hydraulic Control: Hitch mounted hydraulic power pack with; 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anticavitation and pressure relief valves, 12V oil cooler
Nozzles: Air shear.
Controls: Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
Frame: Galvanised steel chassis, linkage hitch fitted with hydraulic power pack
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and hand wash tank. (205L flush tank on 3000L)
Agitation: Venturi agitator.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem suspension axle with 10 x 15" tyres (3000L) or 11.5 x 15.3" tyres (4000L).
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 65 PTO HP (2 row), Minimum 80 PTO HP (3 row).
Options:
- Bravo 180S spray rate controller with hydraulic controls (in lieu) (J99-180)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console) (J99-181)
- Hydraulic row width/height adjustment
- Hydraulic pump driven through power pack (D99-185)
- 100L flush tank (to suit 4000L) (J99-112)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L (2 ROW) TRAILED TURBO SCRAM TURBOWRAP - MIN 65PTO HP

Made in Australia
Features:
- 12 mm AR36 high grade tynes
- 70 mm spacing's
- Front lip to hold rocks & branches
- Standard Tooth Bar Lip style
- Suits up to 100 hp
- Overall width = 2,000 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH ROCK SIEVE BUCKET (2.0M)

Rata 2,500kg Adjustable Pallet Fork. Made in New Zealand.
Features include fixed or adjustable width forks, optional hydraulic side shift and high back safety frame. Pallet forks can be made to fit to almost any front end loader or material handler. Adjustable forks can be locked into place along the sliding bar by the locking bolt on the top of the fork.
1,800kg and 2,500kg (this model) capacity forks have a class 2 fork carriage.
Approx Weight = 235kg
Pallet Fork models AWPF8 and AWPF25 both feature a class 2 fork carriage. This is a standard forklift style carriage that offers greater support for loads of higher weights.
There are a full range of options for Rata Pallet Forks to make this attachment even more versatile. Side shifters and fork extensions can help to make your tractor as useful as any yard forklift.
Pallet Fork Options
HYDSS Hydraulic side shift for AWPF8 (this model) &
AWPF25 (Note: HYDSS can be retro fitted)
PF150 Fork extension kit 150mm wide x 1800mm long
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 2,500KG PALLET FORKS (ADJUSTABLE)

An easy to use, light and low profile hinge.
Looking for a small, long lasting smooth hinge? Our bullet hinges are perfect for tail gates, swing openers, bird or dog cages. Anywhere you need a compact hinge.
Available pin sized:
- 8 mm
- 10 mm
Our bullet hinges are made up of steel casings surrounding a brass pin and washer. Our greasable hinges include a grease nipple at the top.
The casing is uncoated steel, making it easier to weld than galvanised steel products. Galvanised steel is often difficult to weld due to its thick coating.
You can also choose a greasable hinge. We highly recommended this hinge if you plan to use the hinge often, such as on the tailgate of your ute. Greasing your hinge will make it smoother, and last a lot longer than an ungreasable hinge.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 2+
Contact dealer for bulk pricing.
Specifications:
- 10mm pin
- 100mm length
- Greased nipple
Features:
- Low profile
- Easy install
- Long lasting
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 100MM BULLET HINGE GREASED WITH BRASS PIN -BHBPG100

Easy to use. Strong. Rust proof.
Looking for a strong D-shackle for heavy lifting and towing? Our load rated D-shackles are perfect for supporting a heavy load.
Our shackles are perfect for heavy lifting and static systems where a reliable strong D-shackle is needed.
Each load rated screw pin shackle comes with a galvanised steel body and yellow screw pin.
They can be used the same as regular D-shackles however, the rating means you know how much load they will safely be able to handle.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 10+ & 20+.
Specifications:
- 10mm shackle O.D
- 11mm pin O.D
- 17mm internal width
- 1 tonne working load limit
Features:
- Extremely strong
- Easy to use
- Rust resistant
How To Choose A D-SHACKLE
A D-shackle is a great option if you want to attach your chain to other objects. However, you will want to make sure you pick the right D-shackle for your chain.
When choosing a D-shackle, you will need to find out the inside width of the chain link. The pin of the D-shackle will need to be smaller than this width in order for it to fit through your chain link.
To find the inside width of the chain, simply subtract 2x the chain link diameter from the total width. For example, here is how you would calculate the inside width of an 8mm chain:
27mm (width) 2 x 8mm (diameter) = 11mm (inside width)
In this example, the inside width of an 8mm chain is 11mm. This means you would want to get a D-shackle with a pin diameter (Ø) of 10mm or less. (An 11mm pin might be too tight a fit).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 10MM LOAD RATED D-SHACKLES (W.L.L 1T) -DS10R

Easy to install latches that wont shake loose.
Need a solid latch for your ute or trailer that wont rattle loose? Our anti-loose latches wont come undone, unlike other latches which can pop open as they wear and get old.
Ever been driven down a corrugated road only to have your old latches loosen and pop open due to wear and tear? Our anti-loose latches will stay secure no matter how old they are.
Our zinc plated anti-loose latches are made from quality steel to ensure a long lasting secure latch.
Their design allows you to shut your tail gate, spin the locking mechanism which will drop down and ensure your tail gate remains shut and secure. When in the locked position, you can also use a padlock to ensure that the latch cant be opened without a key.
Secure made easy.
Dont have your latches loosen and pop open again!
Price quoted is for one latch.
Discounts apply for bulk kit purchases of 10+ & 20+
Contact dealer for bulk pricing.
Specifications:
- 12mm pin
- 91mm open length
- 20mm latch width
Features:
- Easy to install
- Secure & long lasting
- Zinc plated
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 12MM ANTI LOOSE LATCH WELD-ON - ALWL12

A Smooth Rust Resistant Capping.
Looking for a smooth finish for your RHS? Our square post caps will stop water getting in and corroding your RHS posts.
Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. Its that simple.
Each galvabond square post cap is made from mild steel to ensure a long lasting and strong cap.
Each cap has little ridges on the inside, which means once the cap is on, it wont come off.
What is A Galvabond Finish?
Wondering what a galvabond finish is? What's the difference between a galvanised cap versus a galvabond cap?
A galvanised product, is when the product is made then hot dipped galvanised.
A galvabond cap is created when we get a pre-galvanised sheet and punch the cap out. This creates a lot smoother finish, yet still remains corrosion resistant.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 100mm square
- Galvabond
Features:
- Smooth finish
- Won't come off
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 100MM SQUARE POST CAP - PC100

The Hansa C4 is ideal for the suburban back yard. This solid, light weight chipper will handle all the demands of the domestic garden including fibrous materials. Easy starting, feed through a single inlet chute and discharge out the side with bag option will keep your property shipshape.
If you own a domestic property with trees, flowers or a vegetable garden, you will find the average small shredder on the market of similar size is not efficient for processing all your prunings and trimmings into compost or mulch. They cannot cope with the volume of materials to be processed. They are too slow, block up easily, the inlets are often too small so that the material has to be precut before you feed it into the machine, or they are too lightly built.
The Hansa C4 easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.
Features:
One in-feed chute with large opening at a convenient operating height
Fast chipping action
Quality engine Honda 4 stroke GP160
Easy starting
Discharge out the side directly back onto your garden or stockpile
Solid housing construction of 5mm steel plate
Easy access to cutting blade remove four bolts and everything is accessible
Easy to transport, well balanced on large solid rubber wheels
Quality hyperloc powder-coated finish
Technical Specifications:
Max. chipping capacity: 40mm
Engine: Honda GP160
Max Power: 5.5HP
Fuel tank size: 3.1L
Starting system: Recoil
Inlet chute size: 100 x 130mm
Qty of knives:1
Knife size: 110 x 42 x 9mm
Knife material: A8 modified tool steel
Cutting disk dimensions: 260 x 6mm
Cutting disk weight: 4kg
Cutting disk speed: 3600RPM
Beltdrive: Single
Self-feeding: Yes
Wheels: 250mm Solid
Dimensions: L900 x W500 x H1120mm
Weight: 66kg
Outlet chute height: 450mm
Outlet chute type: Fixed
Warranty: On registration engine four years, chipper two years domestic warranty
Optional Add-Ons and Spare Parts:
C4 Bag
C4 Blade
C4 Anvil
C4 Belt
C4 Cover
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HANSA C4 WOOD CHIPPER - HANSA - C4

This safe, quick and easy hydrant filler kit allows for easy filling without the need to climb onto vehicles.
Features:
- Complies with air gap for safety backflow regulations, protecting the water source
- Includes lid.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID SPRAY 38MM OVERHEAD HYDRANT TANK FILLER WITH CAMLOCK FITTINGS

This Slimline 1,050L rainwater tank has been designed to love you and your garden as much as possible.
Dimensions:
Capacity : 1,050 ltr (230 gallons)
Length : 1,460 mm
Width : 690 mm
Height : 1,515 mm
Features:
- Space-saving modern design, ideal for tight spaces
- Hand grips for easy lifting
- Can be coupled to other tanks for even greater volume
- Available with submersible pump, packaged pump unit or garden pump systems
- Available in 22 Colorbond colours
Standard Fit Out:
Strainer Position: 6 o'clock
Outlet Position: 6 o'clock
Overflow Position: 12 o'clock
Strainer Size: 400 mm
Outlet: 25 mm (brass)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 1,050L RAINWATER TANK (SLIMLINE)

Berends rippers enable you to do a lot of hard work with minimum effort.
Ideal for breaking up hard ground, ripping up stumps or rock, planting trees, laying polythene pipe or removing rabbit warrens.
Specifications:
Designed for tractors over 60hp depending on conditions (Cat 1 linkage with Cat 2 bushes).
Two 150 x 32 billets.
Reversible points 225mm x 75mm x 16mm.
Weight: 110kg.
Max. working depth: 500mm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN TINE RIPPERS - 0047

Wrapped Bale Grab - Made in New Zealand
Bale Clamps Features:
Powerful soft grip
Slim arm design for closer bale stacking
Standard, removable equaliser bar
Soft nudge bars
High tensile greasable pivot pins
Heavy duty model
Excellent for round or square bales up to 1.8m wide
Model WBC001
Open Width 2.1m
Weight 240kg
Lift Capacity 2,100kg
The Rata Wrapped Bale Clamp (soft hands, bale grabs or bale handlers) is popular due to it's ability to handle & transport two bales at once & not damage the wrap.
This wrapped bale grab ensures the softest handling of your bales whilst providing firm clamping pressure. Rata Wrapped Bale Clamps are manufactured to fit onto any Tractor or Telehandler you have.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA WRAPPED BALE CLAMP (GRAB) (2.1 TONNE CAPACITY)

Find Farm Machinery For Sale in Queensland. Browse 7624 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 3,000L (2 ROW) TRAILED TURBO SCRAM TURBOWRAP - MIN 65PTO HP

HIMAC EURO HITCH ROCK SIEVE BUCKET (2.0M)

RATA 2,500KG PALLET FORKS (ADJUSTABLE)

ROTECH RURAL 100MM BULLET HINGE GREASED WITH BRASS PIN -BHBPG100

ROTECH RURAL 10MM LOAD RATED D-SHACKLES (W.L.L 1T) -DS10R

ROTECH RURAL 12MM ANTI LOOSE LATCH WELD-ON - ALWL12

ROTECH RURAL 100MM SQUARE POST CAP - PC100

HANSA C4 WOOD CHIPPER - HANSA - C4

RAPID SPRAY 38MM OVERHEAD HYDRANT TANK FILLER WITH CAMLOCK FITTINGS

POLYMASTER 1,050L RAINWATER TANK (SLIMLINE)

JOHN BERENDS TWIN TINE RIPPERS - 0047

RATA WRAPPED BALE CLAMP (GRAB) (2.1 TONNE CAPACITY)

Farm Supplies Machinery & Equipment

Dealer Address