Farm Supplies Machinery & Equipment

Flojet Triplex (12 Volt DC) Automatic Pressure Pump
LPM: 7.6
PSI: SW 60 BP
Popular Triplex pump for Agriculture use etc.
P/S/V, 3/8 FNTP Threaded, 8 amps.
Intermittent Duty. (No on/off switch).
Suits switch/lead kit accessory 91006-477A
Available individually boxed or bulk packed.
Suits most spray chemicals
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FLOJET 7.6LPM TRIPLEX (12 VOLT DC) AUTOMATIC PRESSURE PUMP - 3501-506

Next generation trailed air assist 4,000 litre G2 sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft, flush tank, chemical induction hopper and Powerhead conveyor with 920mm fan.
Ideal for orchards with trees up to 5 metres high.
Specifications:
Market: Horticulture
Tank Size (L): 4000
Connection Type: Trailed
Min PTO hp: 80
Pump Size (L/min): 161
Height / Width / Length (mm): 2020 / 1880 / 5550
Product Weight (kg): 1400
Application: Orchards.
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast aluminium body with brass heads and manifolds. IDS1701:161L/min. capacity, 5000kPa pressure.
Fan size: 920mm or 1000mm axial flow type,10 bladed fan with curved nylon reinforced blades, centrifugal clutch for soft engagement/ disengagement and protective mesh cover.
Nozzles: 24 flip-over nozzle bodies for dilute/concentrate spraying with on/off. 12 Ceramic hollow cone nozzles per side and 12 ceramic jets with stainless steel swirl plates per side. (16 per side with the Radak conveyor).
Gearbox: 2-speed with neutral position, oil-bath type
Control: 40 Bar electric section valves with master valve, electric pressure regulator and in cab controls.
Main Tank: Polytuff impact resistant polyethylene construction with calibrated sight line. 50mm Camlock top & bottom fill.
Flush Tank: 330L polytuff tank with top fill. Used to flush pump, filter, spray lines and nozzles.
Hand Wash Tank: 60L polytuff tank filled through cap. Tap located next to chemical mixer hopper.
Main Tank: Chemical mixer hopper with tap controls for rinse, transfer and main tank rinse. Venturi transfer back to main tank.
Frame: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator.
Pressure gauge: Glycerine filled gauge located on valve bank.
Filtration: Suction line filter, pressure filter, nozzle cup strainers.
Wheel Equipment: Glideflex axle with 13.0/65 - 18" implement tyres (speed rating 30km/h).
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Minimum 80 PTO HP (920mm fan), minimum 90 PTO HP (1000mm fan).
Options:
- Hydraulic kit for Radak Conveyor (top wings)
- SCRAM Jet (to suit Radak conveyor)
- AVO Jet (to suit Radak conveyor)
- Leaf guard (to suit Powerhead & Radak)
- Double spray lines (Powerhead - includes upgrade to 1000mm fan)
- Double spray lines (Radak)
- Bravo 180S automatic rate controller
- Tandem suspension axle with 11.5/80 - 15.3 tyres
- Flotation tyres - 558-400/60 - 22.5 (in lieu of standard)
- IDS2001 pump, 182L/min. capacity, 5000kPa pressure
- IDS2600 pump, 249L/min. capacity, 5000kPa pressure
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 4,000L SUPAFLO G2 SPRAYER WITH POWERHEAD FAN - MIN 80HP

Fitted with high quality European gearboxes and drive shafts. All shafts are fitted with a torque limiting clutch (tractor end) which is more effective than a slip clutch
Features:
Digs to a maximum 4ft (1200mm) depth if ground conditions permit.
Standard model is suitable for augers from 4in to 12in diameter.
All models are fitted with jib hook and transport chain as standard. Heavy duty model is also fitted with auger control handle for easy positioning.
Specifications:
PTO Shaft: Series 3/L2 torque limiting clutch
Gearbox: 40HP
Main frame: 89x89x5mm RHS
Tractor Hp Required: 20-50HP
Nett Weight less auger: 95kg
Options:
0279 4'auger
0265 6' auger
0267 8' auger
0269 10' auger
0271 12' auger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS POST HOLE DIGGERS STANDARD - 0259

2500 Litre Aqua-V Water Cartage Tank.
Poly Cartage Tanks:
Poly has proven itself to be a durable and dependable material. Its impact-resistant quality makes it the ideal alternative to traditional heavy and rustling steel tanks and fibreglass tanks
Our fleet of cartage tanks has been chosen by TWS Hire for their performance in real-world applications. If you are looking for liquid transport tanks you can rely on, choose Rapid Spray Poly Cartage Tanks.
All of our tanks are manufactured to dual Australian Standards, making them the highest quality, toughest and most durable tank on the market.
Suitable for Potable Water
All of the cartage tanks carried by Rapid Spray are food-grade and suitable to hold potable drinking water. Our tanks have been UV-stabilised to ensure that mould and mildew do not form inside the cartage.
Every mobile water tank has a 15-year warranty so you can rest assured that your water delivery business will be well-supported.
Ball Baffle System:
For a driving experience that is free of the slosh and surge of liquid, use the Ball Baffle System we offer for any cartage tank in our selection.
All of our tanks are manufactured to dual Australian Standards, making them the highest quality, toughest and most durable tank on the market.
Features:
- Tough Australian made poly tank with 15-year warranty
- UV stabilised polyethylene specially formulated with in-built Flexi-Link Technology designed for transport tanks
- Complies with relevant sections of Australian Standards AS2070:1999 & AS4766:2006
- Manufactured from food grade quality material
- Load rating of 1.1 Specific Gravity
- FREE pin mounting kit
- FREE 2 inch Croc-Loc stainless steel bolted flanged tank fitting provides superior grip without leaking or coming loose
Optional Ball Baffles to greatly improve stability
Complies with load restraint guide performance standards.
Specifications:
- Weight kg: 115
- Dimensions: 2000Lx1420Wx1265H
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY 2,500L AQUA-V WATER CARTAGE TANK

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
1.6m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR - MIN 32HP

Series 08 - 2.59m Stump Jump Harrow 3 Point Linkage Hoist Lift Type (4 point pull) featuring Series 21 Hoist Frame - Complete Set.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not stump jump harrows. Picture is for example only.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Series 21 3-Point Linkage Hoist Frame.
8029 - 3 section 2.59m (8ft 6in) - 204kg.
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 2.59m (8ft 6in).
- Weight 204kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.59M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

Easily adjustable grader blade designed for road maintenance, fire breaks, scrub clearance and general farm work.
Features:
Hydraulic offset (3 ram model) or manual offset (2 ram model - 0028) also available
Up to 45 degree hydraulic angle adjustment both ways.
Exclusive patented swivel assembly gives superior strength and reliability and eliminates pivot pin stress often seen in other brands.
Hydraulic tilt.
14in Holden depth wheel makes grading roads an ease.
Has 360 degree rotation.
Available in manual or hydraulic adjustment.
Curved 10mm reinforced mouldboard with heavily gusseted corners for strength where it counts.
Strong bearing support make this one of the best wheelkits on the market.
Hardened reversible cutting edge.
Blade can be reversed for back blading work.
Cat 2 hitch as standard.
Other linkage and quickhitch options on request.
Optional diverter kits (electric or manual) are available to allow 3 ram models to be used on tractors with one single/dual remotes.
Patented Turntable no pivot pin.
Quality Eaton cylinders used.
Tilt 3in x 10in
Angle/offset (8ft model) 3in x 12in.
Angle/offset (10ft model) 3 1/2in x 12in.
Also Available:
0014 8ft Hydraulic Grader Blade 2 Ram
0013 8ft Hydraulic Grader Blade -3 Ram
0028 10ft Hydraulic Grader Blade 2 Ram
Options:
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
0400 Boxed ends
Diverter Options:
0179 Manual diverter converts 2 pair of hoses into 1 pair of hoses
0180 Electric diverter converts 2 pair of hoses into 1 pair of hoses no wiring supplied
0181 Electric diverter converts 3 pair of hoses into 1 pair of hoses no wiring supplied
* Diverter prices reflect the costs when ordered with the machine. All diverter kits are bolted to the headstock and include all relevant hoses and fittings. Wiring and switches at the tractor end are not supplied with the electric model.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3 RAM GRADER BLADE HYDRAULIC 10FT (3M) - 0017

11,260L Slurry Tanker - recessed axle.
Premium slurry tanker with recessed axle and tyres for where flotation is an issue and low ground pressure is needed. Ideal for contractors and large dairy farmers.
Specifications:
Capacity (L) - 11,260
Overall Length (mm) - 6,660
Unladen Weight (kg) - 4,000
Features:
Parabolic leaf sprung drawbar
500/60 x 22.5 flotation tyres
MEC 9000 l/min ballast pump
LED road lights
Wide angle driveshaft
Double trap system
Relief valve
Pressure gauge
Front sight tube
Rear sight glass
4 x 6" filing points
1 x 6" manual parallel hose quick coupler
Brackets to retro fit autofill (6")
Manual gate valve for filling
Hydraulic rear valve for empting
Inverted splash plate
12m of 6" hose (2 x 6m lengths)
Side hose carrying brackets
Rear inspection hatch (20")
Hydraulic brakes
Swivel hitch
Winding jack
Handbrake
Safety chains on drawbar
6" bottom outlet
50mm rear tap
10 year steel warranty
Pressed dome ends
6mm EN42 high carbon steel
High glass painted finish
Models:
AB 2250R 10,460 Capacity 6660mm Length 3,700kg Weight
AB 2250R 11,260 Capacity 6660mm Length 4,000kg Weight
AB 3000R 13,840 Capacity 7500mm Length 4,680kg Weight
Options: 6 and 8" autofill arms for quick and easy filling - available ex stock. Side or mid-mount available. Standard with double flex joints. Range of other options available, ex factory.
Autofill options:
6" side autofill c/w docking station (SD & R series tankers)
6" turbo filler for autofill arm
8" side autofill c/w docking station (Tandem/Tri-Axle series tankers)
8" turbofiller for autofill arm
Options (In Lieu of Standard):
11,000 litre pump on lieu of 9,000L (AB1600 / 2000SD)
13,500 litre pump on lieu of 9,000L (AB1600 / 2000SD)
Hydraulic remote control for pump
Galvanised tank (AB1600 / 2000SD)
Galvanised tank (AB2250R / 2500R)
Galvanised tank (AB3000T / 3500T / 4000T)
8" hose + couplings in lieu of 6" (SD + R series tankers)
Extra 6m 6" hose c/w fittings
Extra 6m 8" hose c/w fittings
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ABBEY 11,260L RECESSED AXLE SLURRY TANKER

Blade for FEL (Front End Loader) with reversible root rake 8000 Series - 2.10m.
The reversible blade & root rake allows the operator to switch over to a root rake when the blade is not in use for earth moving activities.
Top soil does not disappear as the reversible root rake will only pick up debris caught along the way.
There are multiple configurations for the reversible blade & root rake.
Features:
- Manual angle
- Manual tilt
- Hydraulic angle
- Hydraulic tilt
Optional flip down root rake.
Specifications:
- Width (m): 2.10m
- Height (mm): 720
- HP Range: 50-100
- Base Weight (kg): 275
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 8000 SERIES 2.10M - 50-100 HP RANGE

Murray 2.28m, Series 06 Kinked Spring Tine 3 Rank Harrow System - Medium Duty- Complete Unit - 6015.
The Series 06 is a medium duty Spring Tine Harrow System popular with farmers for levelling operations in conjunction with primary and secondary tillage implements.
Series 06 Harrows employ double spring tines available in Kinked or Straight Tines, both 10mm in diameter. The tine angle is adjustable to suit your field conditions.
3 rank versions are available in three sizes ranging from 1.37m (4ft 6in) to 2.28m (7ft 6in). Murrays also manufacture an extra wide 14in (335mm) Rank Spacing Straight Tine units which seeks to provide superior trash flow handling capabilities.
Manual lifting has been eliminated with harrows able to be folded and travel with the principal implement.
Specificatons:
- 2.28m
- Weight: 121kg
- Tine Spacing for 3 rank models - 75mm (3in)
- Tine diameter is 10mm, Kinked (standard) or Straight Tine (Optional)
- Tine Length 450mm (17 3/4in) approx
- Rank Spacing 235mm (9 1/4in) STD 3 Rank
- 2 Mount Arms per unit
Features:
- Kinked design Tines as standard.
- Straight design Tines optional.
- This Harrow is designed to fit on to the rear bar of scarifiers, chisel plows, cultivators etc.
- Adjustable Tine angle.
Optional:
- Straight Tines
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.28M KINKED SPRING TINE 3 RANK HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

This 4ft (1.2m) rake is ideal for fitting on most ATVs, RTVs or even ride on lawn mowers.

Great for cleaning up sticks, branches and general rubbish around the block.

Its 88kg weight is easy to handle but still provides enough weight to rake effectively.

JOHN BERENDS LANDSCAPE RAKE 4FT (1.2M) SUIT ATVS - 0377

Murray Series 32 16 Disc Harrow - Offset Tandem 1.83m.
The Murray Series 32 Disc Harrow is an excellent choice for soil preparation and breaking up virgin land. Built heavy duty, the tandem disc setup combines rugged capabilities with smart features.
The durable box frame is built in two parts, with a pivot point that is able to be locked providing different working configurations. It supports four gangs of discs two front and two rear. Gang angles can be individually adjusted by way of crank screws to suit different conditions. The angle can be adjusted between 0 and 20 degrees to vary the aggression of cultivation. Disc gangs are mounted on sealed-for-life bearings set in rubber. No greasing is required which minimises unproductive maintenance downtime.
In a standard form the Series 32 is a four gang Disc Harrow for use with light to medium powered tractors. By removing the rear frame section and gangs, the Series 32 becomes a handy two-gang implement for light work. Alternatively, the rear frame section and gangs can be pivoted upwards to provide additional weight for penetration by the leading two gangs in heavier conditions. Under uneven ground conditions, the rear frame section and gangs can be allowed to float over undulations for even cultivation.
The Murray Series 32 Disc Harrow is a three-point linkage mounted implement suitable for Cat II hitches. It is supplied complete with fittings and fasteners including linkage pins and clips. Available in two popular sizes 16 discs covering around 1.83 metres (6ft) and a 20 disc model covering 2.28 metres (7ft 6in) approx.
Under certain conditions Disc Harrows can throw up a furrow between the inner discs. The option of a centre spring tine is available which will maintain a level finished behind the harrow in these situations. Optional sets of blade scrapers are also available to keep discs clean and working efficiently in wet or sticky conditions.
Features:
- Available in 16 Disc or 20 Disc models
- Suitable for Cat II systems
- Adjustable gangs from 0 20 degrees
- Sealed for life bearings
- 559mm (22 inch) scalloped discs
- Removable/ pivot rear frame section
Specifications:
- Coverage (m): 1.83
- Coverage (ftin): 6
- Power Requirement: 35 to 55 hp
- Standard Discs: 22 Scalloped Flatback Discs
- Weight (kg): 520
Optional Equipment:
- Scraper set: 16 Disc- 43kg
- Scraper set: 20 Disc - 54kg
- Spring Tooth Centre Tine assembly (1)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

Find Farm Machinery For Sale in Queensland. Browse 7577 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

FLOJET 7.6LPM TRIPLEX (12 VOLT DC) AUTOMATIC PRESSURE PUMP - 3501-506

SILVAN 4,000L SUPAFLO G2 SPRAYER WITH POWERHEAD FAN - MIN 80HP

JOHN BERENDS POST HOLE DIGGERS STANDARD - 0259

RAPID SPRAY 2,500L AQUA-V WATER CARTAGE TANK

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR - MIN 32HP

MURRAY 2.59M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

JOHN BERENDS 3 RAM GRADER BLADE HYDRAULIC 10FT (3M) - 0017

ABBEY 11,260L RECESSED AXLE SLURRY TANKER

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 8000 SERIES 2.10M - 50-100 HP RANGE

MURRAY 2.28M KINKED SPRING TINE 3 RANK HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

JOHN BERENDS LANDSCAPE RAKE 4FT (1.2M) SUIT ATVS - 0377

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

Farm Supplies Machinery & Equipment

Dealer Address