Farm Supplies Machinery & Equipment

For 35 hp tractors
Features:
RHS constructor
Standard with 1x12in auger
Friction clutch gearbox protection
Choice of adjustable holes for easy installation
Specifications:
Gearbox Rating: 20hp
Finish: Green/Red
Weight: 80kg
Optional Augers:
AR100 100mm (4in)
AR150 150mm (6in)
AR230 230mm (9in)
AR300 300mm (12in)
AR380 380mm (15in)
AR460 460mm (18in)
AR610 610mm (24in)
Options:
Tungsten Tip (set)
Tungsten Pilot Tip
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP 35HP LIFESTYLE SERIES POST HOLE DIGGERS

Upgrade from Steel Wheels to 16" Alloy Wheels.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SUREWELD UPGRADE TO 16" ALLOY WHEELS (ONLY) TO SUIT ROLLMAX PLANT TRAILERS

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1970kg
No of bearings: 12
No of axles: 6
Cutting width: 2.74m (9ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 5MM SCALLOP DISCS - 0851, SUIT 75-165HP

Medium duty offset discs ideal for all agricultural and cropping operations. With hydraulic gang and levelling control.
Manufactured in Italy.
Specifications:
Working width: 3200mm
Discs: 28
Weight: 2550kg
Features:
Hydraulic gang adjustment ( Separate ram for both gangs)
Manual levelling adjustment (Optional hydraulic)
12.5/80-15 PR14 tyres
Hydraulic drawbar offset (Optional manual)
660mm scollped discs
6mm thick disc blades
230mm disc spacing
8 bearings (double taper roller) GB280-320
12 bearings (double taper roller) GB370
Bearing protectors
40mm square shaft
150 x 100 x 8mm chassis and gang beam
Swivel hitch
Options:
Manual drawbar offset
Hydraulic levelling adjustment
Models:
GB280 2.8M 24 DISCS 2280kg
GB320 2.8M 28 DISCS 2550kg
GB370 2.8M 32 DISCS 2900kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

GB 3.2M, 28 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

Flexible PVC reinforced spray hose. Selecta hose is manufactured from the highest quality materials and has been rigorously tested for performance and durability.
20m Coil Length
12mm ID
Maximum working pressure 2067 kpa (300psi)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 20M (12MM ID) AG DELIVERY HOSE - SILVAN

High Lift Option for Standard Bucket 8000 series - 1.50m. Requires front remote. (add to appropriate GP Bucket)
Specifications:
- Width (m): 1.50m
- HP Range: 50-100
- Struck Capacity (m3): 0.39
- Rated Capacity (m3): 0.46
- Dimensions LxWxH (mm): 1560 x 750 x 660
- Weight (kg): 203
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER HIGH LIFT OPTION FOR STANDARD BUCKET 8000 SERIES 1.5M - 50-100 HP RANGE

Long lasting, versatile steel chain. Looking for strong rust-proof chain? Our galvanised chain will suit any use you can think off. From securing a yard, to cleaning up around the farm, there is little our chain cant do.
Looking for a versatile and long lasting chain for use on your farm? Our galvanised chain is made from quality steel to ensure a strong chain.
Whatever your needs, we have the right size for you;
- Our 3mm and 4mm chain is great for dog chains.
- Our 5mm, 6mm and 8mm chain is perfect for securing your gates and stockyards.
- Maybe you need something heavier to clean up around the farm? Our heavy duty 10mm and 13mm chain is perfect for heavier jobs.
No matter your requirements, we can help.
Price quoted is for one item.
Specifications:
- 5mm chain
- 17 X 29mm link size (WXH)
- 25kg/bucket
- 49m Approx
- Galvanised
Features:
- Strong & long lasting
- Versatile
- Range of sized
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 5MM GALVANISED CHAIN - 25KG (49M) - GC0525

Titan backhoes are designed to provide superior digging, trenching and material handling. It is high versatile and can be used for a wide variety of tasks such as excavating, landscaping, and construction works. All of Titan backhoes are 3 point linkage mounts.
Note:
- All models include PTO pump and Tank, bolt up lock up bar kit to suit.
- Dealer to allow 3-4 hours shop time for fitting, to include possible addition of welding and painting costs, to ensure product safety when being fitted to some tractors.
- The Side Shift unit is heavier duty, and is recommended for higher duty cycle applications.
- Tractors with PTO seat safety switch will require extra electrics at the dealership.
Dimensions / Specifications included in images.
Options:
Bolt on fixed thumb grab
100 to 180 Ripper
230 to 290 Ripper
Other Bucket Options:
235mm (2 teeth)
300mm (3 teeth)
450mm (3 teeth)
600mm (no teeth)
700mm (no teeth)
900mm (no teeth)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 250CM DIG DEPTH BACK HOE (60-100HP) - CENTRE MOUNT - 3PL - U250

General Purpose Grabs 1.8m GP Grapple - Requires front remotes.
Specifications:
- HP Range: - 80-100
- Approx Capacity (m3): 0.50
- Dimensions LxWxH (mm): 1800 x 700 x 1040
- Weight (kg): 375
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER GENERAL PURPOSE GRABS 1.8M GP GRAPPLE - 80-100HP RANGE

2 stage forklift. Mounted height at 400 ground clearance.
Burder builds 2 stage and 3 stage mast forklifts. The 2 stage mast is suitable for users with low height requirements. The 3 stage mast is the most common build for forklifts and is suitable for users who require more lift height than the 2 stage mast forklift.
Specifications:
Lift Height: 2400mm
Approx. Mast Height: 1800mm
Capacity: 400kg Min, 2000kg Max (further info in images)
Mast Weight: 560kg
All Burder 1,500kg and 2,000kg CTM forklifts have these standard features:
- Clearview through all Burder 2 stage Forklift mast for easy view
- Tine retainer for easy for adjustment
- Compact tilt mechanism, including quick detach (subframe mounted forklift)
- Lock mechanism to ensure easy removal
- Industrial greasable mast bearings with integral thrust for easy maintenance
- Heavy duty industrial mast section
- Hydraulic quick coupler with frame for easy attachment
Burder Forklifts are fitted for extra cost
Options:
2 tonne heavy duty forklift
Quick detach sub frame & compact tilt mechanism (CTM)
Super steer sub frame
Side shift requires extra circuit on valve including hoses on mast
Hoses for tractor remotes 2ccts mid or rear
Hoses for tractor remotes 3ccts mid or rear
2 bank valve
3 bank valve ROPS only
4 bank valve ROPS only
Joystick for ROPS
Cables and joystick
3rd function electric
3rd & 4th function electric
1 x extra hose on mast including couplers
2 x extra hose on mast including couplers
Linkage mount including tilt ram
Fixed high back frame
Bolt on high back frame
Tine retainers (Anti Flip-Up)
Hydraulic soft ride (included in 4.2m & 5.2m units)
Hydraulic soft ride electric
Quick detach hooks for subframe
Weight sensor (pressure sensor in lift circuit, screen in cab) - Dinamica generale fork
Couplers on side shift rams & hoses
Anti-drop valves counterbalance style per circuit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1,500KG, 2.4M LIFT HEIGHT FORKLIFT (2 STAGE)

A spreader bar is a type of hook lifting device used for picking up large and heavy loads. It distributes the load of lift across more than one point increasing stability and decreasing the loads applied during hoisting.
With an easy 4-in-1 bucket pickup design, it is the perfect device for spreading and levelling soil to attach to your excavator and mini loader. These bars are built to suit any type of hitch and for all makes and models of excavators up to 2.5 tonne.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE 2100MM X 1800MM SPREADER BAR

Southern Cross 5ft Slasher - 30-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Optional Wheel Kit(s) - Twin Kit available
Features:
- Built for Australian conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.5mm deck
- Height adjustable skids with five different cuttings heights
- 45HP Bare-Co gearbox
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chains mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (one wheel kit is recommended for the 5ft slasher)
Specifications:
- Recommended Tractor (HP) - 30-45
- Cutting Width (mm) - 1470
- Overall Width (mm) - 1650
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 3.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 323kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

Find Farm Machinery For Sale in Queensland. Browse 7577 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

FIELDQUIP 35HP LIFESTYLE SERIES POST HOLE DIGGERS

SUREWELD UPGRADE TO 16" ALLOY WHEELS (ONLY) TO SUIT ROLLMAX PLANT TRAILERS

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 5MM SCALLOP DISCS - 0851, SUIT 75-165HP

GB 3.2M, 28 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

SILVAN 20M (12MM ID) AG DELIVERY HOSE - SILVAN

BURDER HIGH LIFT OPTION FOR STANDARD BUCKET 8000 SERIES 1.5M - 50-100 HP RANGE

ROTECH RURAL 5MM GALVANISED CHAIN - 25KG (49M) - GC0525

BURDER 250CM DIG DEPTH BACK HOE (60-100HP) - CENTRE MOUNT - 3PL - U250

BURDER GENERAL PURPOSE GRABS 1.8M GP GRAPPLE - 80-100HP RANGE

BURDER 1,500KG, 2.4M LIFT HEIGHT FORKLIFT (2 STAGE)

AUGER TORQUE 2100MM X 1800MM SPREADER BAR

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

Farm Supplies Machinery & Equipment

Dealer Address