Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60HP -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1725kg
No of bearings: 8
No of axles: 4
Cutting width: 2.5m (8ft 3inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 5MM DISCS - 0844, SUIT 60-130HP

14L Foam Marker (Single Sided Model)
Designed for the spray operator that can have a visual reference of the areas sprayed with a boom, eliminating expensive under or overlapping of chemicals. Ideal for ATV bikes & side by sides
Specifications:
Tank Size (L): 14
Product Weight (kg): 12
Height / Width / Length (mm): 340 / 195 / 570
Features:
- 12V fully sealed, dust free compressor
- 10m delivery hose
- ideal for ATV bikes & side by sides
- UV Stabilised Poly Tanks
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 14L FOAM MARKER (SINGLE SIDED MODEL)

Burders trenchers are designed and built to withstand heavy action trenching. The side auger removes the soil and ensures the trench has a clean finish.
All Burder trenchers are fitted with standard dirt teeth and trencher blades are rock friendly.
Includes PTO shaft
Rock friendly blade
Specifications:
Dig Depth: 900mm
Width: 110-200mm
PTO HP: 25-40
Speed: 200 m/hr
Options:
Chain Spacer Kit
Tungsten Upgrade
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 90CM PTO MECHANICAL CHAIN TRENCHER

1,500kg lifting capacity Jib. Includes swivel hook.
Specifications:
- 300mm from face of jib frame
- L x W x H: 500mm x 1275mm x 540mm
- Weight: 190kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1,500KG LIFT CAPACITY JIB (INCL SWIVEL HOOK)

Series 39 Hydraulic folding wing frame with 5 section folding S44 Broadacre Stump Jump Harrow. 4.3m coverage. Transport width: 2.9m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 4.3M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 32
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
3.2m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3.2M S-TINE (32 TINES) STANDARD CULTIVATOR - MIN 64HP

Manufactured from high quality chemical resistant UV stabilised polypropylene for durability. Two start threads are convenient and larger screw type lids feature twist on / off centre cap, incorporating a double breather valve (single on smaller lids) for fast tank filling and quick emptying.
Other sizes are available (refer to picture) to suit many applications - eg. filling points, inspection hatches and man-holes used in agricultural water and chemical tanks.
OD = 355 mm
ID = 313 mm
Height = 29 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 355 MM TANK LID (MALE THREAD WITH BREATHER)

18.5LPM (12 Volt DC) Flojet Quad Series Pump
LPM: 16.3
PSI: SW 45 N-BP
Popular High Flow model Water Pressure System
P/S/E, 3/4 HB Quad Ports, 13 amps.
No Bypass.
Suits potable water
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FLOJET 18.5LPM (12 VOLT DC) QUAD SERIES PUMP - R4300-143

Remote controlled 12V retractable hose reel skid sprayers. Including a turbo spray gun which comes standard with all skid sprayers.
Ideal for spot spraying - and for fitting to utilities, UTV, trucks and trailers sizes include 300, 400 (this sprayer) and 600 Litre tank capacities.
Available with remote control hose reels and a range of engine driven Silvan diaphragm pumps.
Specifications:
Tank Size (L): 400
Max Pressure: 38 L/min open flow 40 Bar / 580 psi
Features:
- available in 300L, 400L (baffled) and 600L; fitted to galvanised skid
- Australian made remote control hose reel
- Honda engine and comet APS41 pump
- 38 L/min (open flow) 40 Bar / 580 psi max pressure
- 100m smoothline hose and turbo 400 spray gun
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400L REMOTE CONTROL SKID SPRAYER (SINGLE REEL - ELECTRIC START, C/W BATTERY)

Powercut Bypass Lopper - 750mm.
These Wolf bypass loppers incorporate POWER®CUT, the new cutting head technology which multiplies the applied force making cuts even easier.
Features:
- The flat headed screws protect the tree from unnecessary damage to the bark.
- Ultra-lightweight aluminium tube handles
- Non-stick coated blades reduce the adhesion of sap to the blades cutting surface.
- Newly designed shock absorbing rubber buffers minimise the cutting impact as do the ergonomic soft grip handles.
- Manufactured for maximum durability with numerous easy to-replace wearing parts.
- Two-blade or bypass technology is ideal for precise clean cuts on green branches, aiding healing.
- Will cut branches up to 40mm in diameter
- Engineered for maximum durability.
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WOLF LOPPER POWERCUT BYPASS -750MM

TRP-RT 120, 145, 175 mulchers are tractor-mounted machines to be fitted to the tractor three-point linkage. Ideal to collect, to shred and to store pruning of vineyards, orchards and olive groves.
Unique for the big-bags made of special transpiring material ensuring a natural mulched product drying. TRP-RT mulchers properly shred pruning residues aimed to be collected for energetic purposes.
TRP-RT range is equipped with a pick-up device - for pruning lifting - avoiding grass, stones and soil entering into the mulching chamber.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540 / 1000
Tractor horse power HP: 80-130, KW: 59-96
Working Width: 1450mm
Overall Width: 1450mm
Weight: 1200kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller wheels (adds 200mm to overall width for TRP120/06 RT + TRP145/06 RT, adds 190mm to TRP175/06 RT)
- Front wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.4M TRP-RT MULCHER (SUIT 80-130HP)

25.5m³ Tandem axle vertical twin augur feed mixer with proven 96% mix consistency. Unique tub and auger design for optimum performance in Australian conditions.
Left and right side door discharge with elevator on right hand door for trough feeding applications.
Features:
25.5(m³) capacity
Digi Star electronic weighing system
4 weigh bars, gold plated
Independent chassis
20mm base plate (floor)
8mm ST52 hardox wall
15mm auger flighting
Large adjustable counter knives
SOM planetary gear drive
2 speed gearbox
3-year gearbox & structural warranty
Wide angle driveshaft
Tandem axle with 435/50R19.5 wheels
Heavy 3 stage jack
LED rear lights
Right and left side hydraulic operated discharge doors
1200mm PVC elevator mounted RH door
Electric in cab box (1 DA remote required)
Mineral chute
Options:
- Fibre knife set
- Front door feed with PVC cross belt, 1140mm PVC side elevator & in cab electric control box (1 DA bank required)
- OE0019 3.2m long PVC Elevator (In lieu of 1140mm PVC)
- OE0019 3.2m long PVC elevator (supplied at a later time)
- Spec 2 front door feed & 3.2m elevator fitted on RH door. Electro-hydraulic operated with in-cab electric control box (factory order option only)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ABBEY 25.5M³ 2550T VERTICAL FEED MIXER

Find Farm Machinery For Sale in Queensland. Browse 7647 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 5MM DISCS - 0844, SUIT 60-130HP

SILVAN 14L FOAM MARKER (SINGLE SIDED MODEL)

BURDER 90CM PTO MECHANICAL CHAIN TRENCHER

BURDER 1,500KG LIFT CAPACITY JIB (INCL SWIVEL HOOK)

MURRAY 4.3M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

JOHN BERENDS 3.2M S-TINE (32 TINES) STANDARD CULTIVATOR - MIN 64HP

SILVAN 355 MM TANK LID (MALE THREAD WITH BREATHER)

FLOJET 18.5LPM (12 VOLT DC) QUAD SERIES PUMP - R4300-143

SILVAN 400L REMOTE CONTROL SKID SPRAYER (SINGLE REEL - ELECTRIC START, C/W BATTERY)

WOLF LOPPER POWERCUT BYPASS -750MM

NOBILI 1.4M TRP-RT MULCHER (SUIT 80-130HP)

ABBEY 25.5M³ 2550T VERTICAL FEED MIXER

Farm Supplies Machinery & Equipment

Dealer Address