Farm Supplies Machinery & Equipment

A dual function Chipper/Mulcher. Mulch dry or wet material including all garden waste, newspapers, bamboo, manure, hedge trimmings kitchen waste, hay, leaves and palms.
Chips most branches up to 65mm.
Engine - Kohler 5.5hp
Starter - Pull Start
Chipping Capacity - Single hardened chipper blade with high carbon steel. Chips most branches up to 65mm
Mulching Technology - 18 spring steel reversible hammers on a balanced flywheel with heat treated blade spindles.
Chassis - Steel construction
Transmission - V Belt B section cast iron pulleys or with optional centrifugal clutch for no load starting
Weight = 65kg
Dimensions - H = 1,200 mm x W 680 mm x L 700 mm
Optional Engines include Honda GX200, or 2hp Electric Motor. Prices will vary according to engine chosen.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POWERTECH CM65 CHIPPER / MULCHER WITH KOHER 5.5HP MOTOR

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3500kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 3.88m (12ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

Note: This model does not include a crumbler, however, it is available as an option. The second & third picture of this listing shows the cultivator with a crumbler.
Features:
Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 45mm x 12mm
Frame Size: 50mm x 50mm RHS
Tractor HP Guide: 3HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Solid Rubber Depth Wheels
HD Tine helpers
2.4m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.4M S-TINE (16 TINES) HEAVY DUTY CULTIVATOR - MIN 48HP

Made in Australia. Suitable for many applications, from tree watering to fire-fighting and much more.
Features:
- Quality trusted pump Loncin powered Miniblaze pump
- 166 LPM @ zero head
- Easily attach to any flat surface such as a ute tray provision for strap or pin mounting
- Wear pads allow airflow and protect ute tray
- Integrally mounted pump saves tray space
- Adjustable nozzle with 12m of hose as standard
- Versatile and lightweight
Dimensions: 1,680 L x 750 W x 600 H
Capacity: 400 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 400L FIRE FIGHTING UNIT (2.5HP PUMP)

Size = 1/2 "
Suits 10mm hose
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1/2" ELBOW (SUIT 10MM HOSE)

Quality European made product, the Agromaster AFS Field Sprayer is a tractor mounted sprayer developed to meet the different requirements of plant protection treatments. They are extremely versatile and suitable to operate with open field cultivations to spray and distribute herbicides among plant rows.
The availability of spray booms (6m, 8m, 10m or 12m) together with different equipment options allow our sprayers to suit the requirements of any user.
Specifications: AFS-400
Capacity: 400L
Construction: Poly Tank with Galvanised Frame
Total Length: 1380 mm
Total Width: 900 mm
Total Height: 1200 mm
Litres Per Minute: 71
Pump: C-71
Handwash Tank: Yes
PTO Shaft: Included
Additional Hose, Reel & Gun Options
Galvanised Reel, 20.0M Hose & Spray Gun
Galvanised Reel, 30.0M Hose & Spray Gun
Other OPTIONAL Extras
Sectional Control
Electric In Cab Controls
Foam Marker(s)
Nozzle Protectors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGROMASTER AFS-400 : 3 POINT LINKAGE - 400 LITRE INC 6M BOOM & 30M HOSE + REEL

Quality Stick Rake for ride on mowers and ATVs with pin type connection.
- Certified Australian Made
- A towable stick rake for your ride on mower or ATV
- A stick rake is an essential for getting your property ready for the coming fire season or keeping it looking tidy
- Rake large areas with ease and speed
Features:
- 1m wide
- High build quality
- Simple design
- Simple operation Tow over sticks and leaves, pull handle forward to leave sticks and leaves in neat pile
- Heavy duty spring bolt to lock rake up for transport
- Large wheels to roll over rough terrain
- Super tough screen wire tines
- Hot dipped galvanised for extreme protection against the elements
- Australian made
Model:
SR1000:
Weight - 25kg
Dimensions - 102 × 27 × 85 cm
Tow connection - Pin type (towball version also available)
2024 design changes are as follows...
- A narrower drawbar for better turning on all vehicles, especially ATV's.
- The rake is now constructed with 500mm sections meaning the 1m and 1.5m rakes now have common components. This new design also allows for customers who purchase 1m rakes, to purchase an additional 500mm section and can upsize their rake to a 1.5m. For customers with 1.5m rake, they can reduce the rake width down to 1m if required by removing a section.
- Handles on the rakes also feature a bend at one end. This makes the handle reversible to allow for better use when being towed with ATV's and zero turns. The reversed handle improves the leverage and a pull rope can be added to the handle allowing the rake to be lifted when still seated on these style vehicles.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CURRIE ENGINEERING 1M MOWER / ATV STANDARD STICK RAKE (PIN TYPE)

Snake Mesh - 1200mm high x 5m long.
Snake Mesh (Aviary Mesh) is a welded mesh product made from galvanised wire.
It is used predominantly for making bird enclosures, and is available in various wire thicknesses and hole sizes for different sized birds, from the smallest finches to the largest parrot.
A GBW (Galvanised Before Welding) product is available in 12.5mm x 12.5mm square size, 1.25mm wire diameter.
This is a premium product for those requiring a super straight product.
This mesh is purchased mainly by the home handyman, makers of bird enclosures and fabricators.
Specifications:
- 6.5mm x 6.5mm square
- 0.63 wire diameter
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS SNAKE MESH - 1200MM HIGH X 5M LONG

A strong universal heavy duty hinge. Need a heavy duty hinge for your large heavy doors? Whether you have a timber or steel structure, our ball bearing hinges can take the load.
A lot of older farm buildings, such as shearing sheds, are made up of solid timber. The doors are timber, the frames are timber, everything is timber! The doors are big, wide and heavy. It can be difficult to find a strong, durable hinge to fit your needs.
Our ball bearing hinges allow you to screw onto both a timber door and timber posts. We also have a weld-on hinge option if you have got a new steel framed door or post.
This product is a smooth swinging durable hinge that can be bolted or welded.
Weld & Bolt-On Options
For both timber & steel structures
What are the hinge components?
These zinc plated heavy duty hinges are made of quality steel.
Each set includes a top and bottom part of the hinge. Left or right orientated pins are available based on your needs whether its bolt/bolt, bolt/weld, or weld/weld.
The main hinge has the precision cut pin welded into it. The socket, which the pin is then inserted into includes a big ball bearing. This ensures your door hinges can take a heavy load, yet still open and close smoothly. The ball bearing is kept in the socket with a little collar so it wont accidentally fall out.
To ensure the longevity of your hinge, you can grease the steel ball bearings through greasing points.
Price quoted is for one pair.
Discounts apply for bulk kit purchases of 2+
Specifications:
- 105 x 85mm
- Right position
- Bolt -on type
Features:
- Universal
- Strong
- Easy install
- Long lasting
- Low profile
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL RIGHT BALL BEARING HINGES (PAIR) 105 X 85MM - BBHBR

A Compact, Light Duty Hinge.
Do you need a lighter duty hinge for your household doors, or ute tool box? Our butt hinges are great for any lightweight doors.
Price quoted is for one pair.
Discounts apply for bulk kit purchases of 10+ & 20+
Specifications:
- 100 x 75mm
- Zinc
Features:
- Compact
- Light Duty
- Zinc plated
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 100MM X 75MM BUTT HINGES (PAIR) - BH10075

Key Features:
Consistent Sweeping: The pick-up head is mounted parallel to the ground, ensuring the sweeping brush stays at a consistent height, even as the hopper fills. Its ideal for uneven terrain.
Overhead Dumping: The standard overhead dump system makes it easy to empty debris into standard containers, with a 170cm dumping height for efficient unloading.
Easy Mounting: The sweeper attaches to the lower link arms of the tractors 3-point hitch, ensuring smooth, precise operation behind the towing vehicle.
Large Capacity: With a 1.6 m³ container, you can sweep longer without needing to stop and empty.
Accurate Tracking: The pivot point in front of the machine ensures accurate tracking, making it easy to work close to obstacles like trees and edges.
Standard Build Inclusions:
- 1274013 2-Point Hitch Attachment with Hose Support
- 1274029 Hydraulic Drive System
- 1272508 Rear Collision Guard with Light Kit
- 1274050 Electronic Fill Level Meter with Digital Display
- 1240385 3-Pin Electrical Harness for Fill Meter
- 1274023 Low Mount Hitch Below PTO Shaft Stub
Overall Width = 1.7m
Working Width = 1.3m
Weight = 650kg
Min HP = 15hp
The Wiedenmann Super 1300 S is a compact, high-performance sweeper designed for use on sports fields, golf greens, public parks, and residential lawns. Its perfect for efficiently collecting grass clippings, leaves, and other debris.
Optional Equipment
- Comfortable electro-hydraulic control with filling indicator requires one double-acting hydraulic connection.
- Filler Plate for Spindle-Mown Grass (Lightweight Material)
- Additional Year Warranty Extension (24 months Total)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WIEDENMANN 1.7M WIDE - 15HP+ TRACTOR SWEEPER (FIELDS / OVALS / PADDOCKS)

Australian made Frame - German made Spears
Features:
- Quality German-made 1200 mm removable spears - conus 2
- Bright red colouring for maximum visibility
- 2 or 4 spear configurations to deal with various loads
- 1,200 mm Spears are removable
- Euro hitch as standard
- Frame Height = 1,200 mm
- Weight = 150kg
- Suits : 40 - 115 hp
- Lift Capacity = 2,500 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH HAY FORKS (FOUR SPEAR)

Find Farm Machinery For Sale in Queensland. Browse 7523 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

POWERTECH CM65 CHIPPER / MULCHER WITH KOHER 5.5HP MOTOR

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

JOHN BERENDS 2.4M S-TINE (16 TINES) HEAVY DUTY CULTIVATOR - MIN 48HP

POLYMASTER 400L FIRE FIGHTING UNIT (2.5HP PUMP)

SILVAN 1/2" ELBOW (SUIT 10MM HOSE)

AGROMASTER AFS-400 : 3 POINT LINKAGE - 400 LITRE INC 6M BOOM & 30M HOSE + REEL

CURRIE ENGINEERING 1M MOWER / ATV STANDARD STICK RAKE (PIN TYPE)

LEMPRET WIRE & SEALANTS SNAKE MESH - 1200MM HIGH X 5M LONG

ROTECH RURAL RIGHT BALL BEARING HINGES (PAIR) 105 X 85MM - BBHBR

ROTECH RURAL 100MM X 75MM BUTT HINGES (PAIR) - BH10075

WIEDENMANN 1.7M WIDE - 15HP+ TRACTOR SWEEPER (FIELDS / OVALS / PADDOCKS)

HIMAC EURO HITCH HAY FORKS (FOUR SPEAR)

Farm Supplies Machinery & Equipment

Dealer Address