Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3500kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 3.88m (12ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

A Secure & Long Lasting Spring Latch
Looking for a secure latch for your gate? Our spring loaded hook latches will ensure that your gate stays shut.
If you are looking for a more secure and stock proof alternative to your standard hook latches, then our spring hook latches are an excellent solution.
Our spring latches are slightly different from our competitors. On each latch we there is an indent in the stainless steel circle ring that has been custom designed to resist sideways movement. This ensures a secure and longer lasting latch.
Individually tested. We assemble and test all of our spring hooks individually to guarantee quality and a secure spring.
Price quoted is for one spring hook latch only.
Discounts apply for bulk purchases of 10+, 25+, 50+.
Specifications:
- 500mm chain length
- one spring hook latch
Features:
- Stock proof
- Quick & easy to use
- Long lasting
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL SPRING HOOK LATCH 700MM - CL700S

80mm 50 mesh Element Filter.
Efficient filtration is an important component of every sprayer. Effective filtration through the use of the correct suction filter / element will screen out any larger particles and provide protection for the pump.
Filter Type = SAR2 / SAR2/V
Mesh Size = 50
Width = 80 mm
Height = 165 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 80MM SUCTION LINE FILTER

Rated to 1,100kg. These Australian made and designed attachments are suited to front end loaders fitted with the Euro hitch (Global) system.
Specifications:
Fork length: 1100mm
Tine Length: 1100mm
Overall Weight: 165kg
Overall Height: 960mm
Overall Width: 1120mm
Rated to 1,100kg
Kubota Bob Attach connection version is also available 0282
Features:
Load Rating tested to 1100kg (AS2359) at 600mm load centres.
100x50x6mm reinforced tines with bevelled ends.
Adjustable tines with maximum width at 900mm tine centres. Easy to adjust with locking bolt to secure in position.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS FEL COMBINATION PALLET FORK-SILAGE FORK EUROHITCH - 0283

Pressure Switch to suit DDP-550 or DDP-555 pumps - Max Pressure 60 psi
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN PRESSURE SWITCH TO SUIT DDP-550 OR DDP-555

Universal Post Puller - Manual tool to pull out steel pipe or timber posts.
Can be adjusted to remove 2" to 4" Gal round or square steel pipe and timber posts
It has dual grip rollers to allow for a larger surface area on timber posts.
The pivoting arm and cheater arm are both reinforced for additional weight to be applied.
The nip rollers are adjusted along a toothed backing plate marked with sizes from 2" to 4".
Features:
- Specifically developed to pull posts out straight for reuse
- Pulls out any post with an edge for example all kinds of "Y", "T", roadside reflector, vineyard and trellising posts
- Most post are extracted with 1-2 tonnes which can be applied with the weight of one person
- You can apply up to 3 tonnes of pull to a post with two people
- The nip roller jaws are designed to grab the post - the harder you pull, the harder they grab
- The nip rollers can be index to use in 8 different positions extending the life of the tool dramatically
- The nip rollers and pins are all made out of high tensile steel and heat treated
- The nip roller jaws can grab from 1mm through to 8mm thick steel in the standard arrangement
- Specialised backing plates are available to extend the grab of the nip rollers to 30mm through to 50mm thick steel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MARCHANT ENGINEERING PTY LTD UNIVERSAL POST PULLER - FOR STEEL PIPE OR TIMPER PIPES

Type 5880 Boomjet Nozzle is used for spraying areas not easily accessed with a boom sprayer. It combines two off-centre tips and three VeeJet nozzles to produce an overall wide swath flat spray.
The nozzle assembly provides good distribution considering the wide pattern coverage obtained: however the uniformity is not as good as with a properly operated boom sprayer. Uniformity can be optimised by double overlapping spray swaths on successive sprayer passes. Remember this also doubles the application volume.
Supplied with one additional 1/4 NPT pipe plug and one blank tip for setting BoomJet to one side only. Also has a 1/4 NPT pressure gauge port.
Specifications: Refer to images.
Other sizes available for the same cost:
5880-3/4-2T0C06 - Nozzle A: 6733-0C06, Nozzle B: H1/4VV-1506
5880-3/4-2T0C10 - Nozzle A: 0C-10, Nozzle B: H1/4U-0508HE
5880-3/4-2T0C40 - Nozzle A: 0C-40, Nozzle B: H1/4U-0540HE
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN BOOMLESS NOZZLE FLAT SPRAY

27m³ Tandem axle vertical twin augur feed mixer with proven 96% mix consistency. Unique tub and auger design for optimum performance in Australian conditions.
Left and right side door discharge with elevator on right hand door for trough feeding applications.
Features:
27(m³) capacity
Digi Star electronic weighing system
4 weigh bars, gold plated
Independent chassis
20mm base plate (floor)
8mm ST52 hardox wall
15mm auger flighting
Large adjustable counter knives
SOM planetary gear drive
2 speed gearbox
3-year gearbox & structural warranty
Wide angle driveshaft
Tandem axle with 435/50R19.5 wheels
Heavy 3 stage jack
LED rear lights
Right and left side hydraulic operated discharge doors
1200mm PVC elevator mounted RH door
Electric in cab box (1 DA remote required)
Mineral chute
Options:
- Fibre knife set
- Front door feed with PVC cross belt, 1140mm PVC side elevator & in cab electric control box (1 DA bank required)
- OE0019 3.2m long PVC Elevator (In lieu of 1140mm PVC)
- OE0019 3.2m long PVC elevator (supplied at a later time)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ABBEY 27M³ 2750T VERTICAL FEED MIXER

Series 56 Murray Hydraulic Bale Brab - 8 bale.
Features:
- High Strength Steel Bale Hooks
- Heavy Duty Frame & Bale Fence
- Fence is removable or able to swapped from R/ hand to L/ hand
- Able to be fitted with appropriate attachment mechanism to suit tractor, load or telehandler.
Specifications:
- 8 bale
- Weight: 329kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY HYDRAULIC BALE GRAB- 8 BALE, 3PL- SERIES 56

The Auger Torque Cement Mixer Bowl 180 is perfect for Mini Loaders, Skidsteers and Excavators 1T - 7T.

Fencing tasks over rough ground often require post fixing cement to be mixed in small quantities, however rough terrain can often mean a traditional mixer cant be used.

Auger Torques drill/mix solution changes all that. With the aid of the mixer cradle hitch, the auger can be quickly removed and the mixer bowl attached and locked in place with the standard auger pin.

After the concrete has been laid the auger can be replaced for the next post. Simple!

The 180-litre capacity mixer bowl attaches quickly and easily to our earth drills.  Skid steer and excavator mount brackets are available, and a mixer bowls is the perfect addition to our Mini Loader Earth Drill range.

AUGER TORQUE 180L MIXER BOWL 65MM ROUND DRIVE

Murray 53100, Series 53 3PL Counterweight
85kg Empty
600kg Capacity
Cat I & II
3PL refers to the way to attach implements to tractors. This configuration provides the best counterbalancing effect by applying some force behind the rear axle and reducing in this way the weight carried by the front tires, rims and axle.
Simply load up with 600kg of concrete, or any materials on your farm, to counter the weight on the front loader.
Counterweights are important in maintaining the stability of the tractor when using front end loaders. With a front end loader fitted onto a tractor, the centre of gravity shifts forward. The centre of gravity is further amplified when the loader lifts a load thus putting pressure on the tyres, axle and rims.
The Counterweight prevents Tractors overturning during loader operations.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 3PL COUNTERWEIGHT (600KG CAPACITY) - CAT I & II

Based on simple but strong designs, the post driver runs off a single set of remote hydraulics.
No plumbing in the back axle is required. Compared to most brands, the design is almost frictionless resulting in a virtually free falling weight with a greater pounding force. As a result, a lighter weight can be used. Suits a range of post sizes from star pickets to strainer posts.
Overall weight approx 620kg
Overall height 3.9m
Requires tractor with one set of hydraulic remotes and 12 volt supply.
Also Available:
0266 Post Driver with Double Bank Hydraulic Control Valve Lift & Tilt
0268 Post Driver with Triple Bank Hydraulic Control Valve Lift, Tilt & Fore/Aft
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS POST DRIVERS WITH SINGLE BANK HYDRAULIC CONTROL VALVE - 0263

Find Farm Machinery For Sale in Queensland. Browse 7661 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

ROTECH RURAL SPRING HOOK LATCH 700MM - CL700S

SILVAN 80MM SUCTION LINE FILTER

JOHN BERENDS FEL COMBINATION PALLET FORK-SILAGE FORK EUROHITCH - 0283

SILVAN PRESSURE SWITCH TO SUIT DDP-550 OR DDP-555

MARCHANT ENGINEERING PTY LTD UNIVERSAL POST PULLER - FOR STEEL PIPE OR TIMPER PIPES

SILVAN BOOMLESS NOZZLE FLAT SPRAY

ABBEY 27M³ 2750T VERTICAL FEED MIXER

MURRAY HYDRAULIC BALE GRAB- 8 BALE, 3PL- SERIES 56

AUGER TORQUE 180L MIXER BOWL 65MM ROUND DRIVE

MURRAY 3PL COUNTERWEIGHT (600KG CAPACITY) - CAT I & II

JOHN BERENDS POST DRIVERS WITH SINGLE BANK HYDRAULIC CONTROL VALVE - 0263

Farm Supplies Machinery & Equipment

Dealer Address