Farm Supplies Machinery & Equipment

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Can be offset in seconds to work outside the tractor wheel to the left or right hand side.
Choice of 5 positions each way to a maximum of 600mm offset.
Alternative holes for the lower linkage arms, provide ample tilt for V-draining.
Provides 30 degree tilt each way.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 6ft
Mouldboard Thickness: 8mm
Mouldboard Height: 450mm
Tractor HP: 30-60
No of Offset Positions: 9
Weight: 200kg
Options:
0009 Grader Blade Wheel Kit.
0419 Boxed ends suit Medium Duty model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) - 0005

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1575kg
No of bearings: 6
No of axles: 2
Cutting width: 2.06m (6ft 9inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 6MM DISCS - 0840, SUIT 60-130HP

Murray 4.83m, Series 04 Diamond Harrow 3PL hoist lift type system with Series 21 Hoist Frame.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not diamond harrows. Picture is for example only.
4005 - 5 sections - 4.83m.
Features Model 21003 Hoist Frame.
Complete Set Comprises: Front Lift Drawbar, Harrow sections, Rear Lift Drawbar and Series 21 3-Point Linkage Hoist Frame.
Suitable for open country and lighter loamy soils, Murray Diamond Harrows are an effective implement used for weed control and final seedbed preparation.
Specialising in shattering soil crusts allowing improved aeration and moisture penetration, it will give your crops every chance of reliable germination and subsequent vigour.
The Diamond frame design is constructed using flat bar material providing the Harrow with strength and rigidity. It features replaceable bolt-in 16mm square section High Carbon Steel tapered tines with a working depth between 50 to 80mm (2" to 3").
Murray Diamond Harrows are supplied in sets complete with drawbars, ranging from 2 sections 2.03m (68) to 10 sections 10.16m (334). Lift type sets using our 3 Point Linkage Hoist Frame (Series 21) are available, making transportation of your Harrows easy and convenient. The complete set is comprised of a Front Lift Drawbar, Harrow Sections, Rear Lift Drawbar and 3 Point Linkage Hoist Frame (Series 21).
Features:
- 2 Point Pull (2PP). Replaceable bolt-in 16mm square section High Carbon Steel tapered tines.
- Manufactured from flat bar material
Specifications:
- 30 kg (66lb).
- Coverage 0.97M (38").
- Tine Spacing 51mm (2").
- Tine Length 152mm (6") approx
- Centre to centre of Front Hooks 508mm (20").
- 5 Rank / 20 Tines.
- Tapered Tines with working depth between 50-80mm (2" - 3")
Model No. 4029 2 section set Rear Lift connectors supplied in lieu of Rear Lift Drawbar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.83M 3PL HOIST LIFT DIAMOND HARROW SYSTEM 5 SECTIONS WITH SERIES 21 HOIST FRAME

The Nobili rear mount BPR series mulchers are multi-purpose machines ideal for pasture topping with double hitch that fits to the front or rear of the tractor and hydraulic side shift. Suited to tractors up to 150HP with cutting height maintained by rear roller.
Features:
Suggested Use: Grass mowing and green pruning's up to 75mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced 8 row rotor.
Control: Hydraulic side shift.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Tractor HP: 70-150 HP
Blades (Cast Hammers): 22
Working Width (mm): 2095
Product Weight (kg): 840
Dimensions WxHxD (mm): 2238W 550H 1300D
NOTE: There is a $770.00 surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.09M BPR MULCHERS (70-150HP)

This Slimline 600L rainwater tank has been designed to love you and your garden as much as possible.
Dimensions:
Capacity : 600 L
Length : 1,220 mm
Width : 580 mm
Height : 1,265 mm
Features:
- Space-saving modern design, ideal for tight spaces
- Hand grips for easy lifting
- Can be coupled to other tanks for even greater volume
- Available with submersible pump, packaged pump unit or garden pump systems
- Available in 22 Colorbond colours
Standard Fit Out:
Strainer Position: 6 o'clock
Outlet Position: 6 o'clock
Overflow Position: 12 o'clock
Strainer Size: 300 mm
Outlet: 25 mm (brass)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 600L RAINWATER TANK (SLIMLINE)

300 series Mekfold Folding Power Harrow with 450mm cage roller
Specifications:
Tractor HP: 160-300
Working Width: 4960mm
Folded Width for Transport: 2500
Working Depth: 100-300
Blades: 40
Weight: 2800kg
Features:
- Single speed central gearbox (1000 RPM) and multi speed side gearboxes.
- Phased rotors.
- Stone protection system.
- Levelling bar standard.
- Floating side shields.
- Folded width 250cm.
- 450mm Cage roller standard.
- Konic - tapered roller bearings on MEKFOLD350.
- 1 3/4" 20 spline PTO with cam clutch.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 5M MEKFOLD300 POWER HARROW (160-300HP) WITH 450MM CAGE ROLLER

5.58m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3414 - 5.58m (18ft 4in) (28 Row) 6/12 Tine - 114kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 3 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

A rugged, extra tough slasher built to take real punishment from continuous work ideal for contractors.
Features:
Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular crossmembers where it counts.
Adjustable skids. Contractor option fitted with additional runner for wear.
Contractor option has hot dipped galvanised body.
Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
110 HP oil lubricated Italian Comer gearbox with 1:1.5 ratio and excellent seal protection with 5 Year Manufacturers Warranty.
Straight reversible 100 x 12mm Boron slasher blades are standard with stepped configuration as an option. All bushes are hardened.
Made in Australia.
The blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
Hardened and tempered spring steel rotor blade assembly. Bolt head protection on contractor option allows easy changeover of blades.
Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
Front and rear chain kits are standard with easy to replace chain pieces.
Specifications:
Adjustable Skids
Front and Rear Chains
Cutting Width 2050 mm
Overall Width 2200 mm
Tractor HP 75+
Cutting Height 25-100 mm
Weight 735 kg
Galvanised Body
Dual Solid Rubber Wheel Kits
Additional Skid Wear Runners
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EHD210 CONTRACTOR SLASHERS 2.1M 0084- 75+HP

The two-hole straining plate increases efficiency at every running post and corner in your fence-line. It serves two main functions: (1) to allows the wire to be quickly strained at running posts & corners without tying a knot and (2) to preserve 100% of the wire strength. No knot means no weakness in the wire, and it works on both plain and barbed wire.
In over 5 years of use there hasn't been a single wire slip.
(Tek Screws NOT included, but can be added to order). Simply attach and tighten it over the wire with two tek screws (14 gauge, 3/8 drive x 25mm) and you have a solid grip on the wire. Avoid over-tightening your tek screws.
Note: These are designed to replace knots along the line, where there are multiple running strainer posts. They don't replace your normal termination knot at both far ends of the fence.
Options:
- Two Tek Screws Per Two Hole Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING TWO-HOLE STRAINING PLATES (BOX OF 50)

1,900L Spray Pro, BP130/20 Pump, 18M Boom.
Specifications:
Tank Size (L): 1,900
Connection Type: Linkage
Pump Size (L/min): 132
Height / Width / Length (mm): 3410 / 2300 / 4100
Product Weight (kg): 1,350 (dry)
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with raised pump mount. BP130/20: 132 L/min. capacity 2000kPa pressure.
Boom: Hydraulic lift, fold and tilt with parallel arm boom suspension, nitrogen accumulator and spring-loaded breakbacks. Galvanised boom with stainless steel spraylines. Minimum 3 sets of hydraulic remotes required.
Controls: 3 section Silvamatic electric controls with pressure compensating direct acting valves. On/off and pressure adjustment in cab.
Tank: 1600 and 1900L Polytuff impact resistant polyethylene construction, external sightline with floating ball and non-spill offset screw-down lid with single breather. 10L hand wash tank with screw-down lid and on/off tap. 150L flush tank with screw down lid and external sightline. 50mm Camlock bottom fill.
Frame: Galvanised steel, with adjustable cat II & cat III hitch. Vertical boom channel positions boom at optimum spray height.
Agitation: Bypass agitation.
Chemical Induction: 30L Silmix chemical hopper mounted on side of tank.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer, suction line strainer with stop valve fitted at the side of the tank to enable ease of filter maintenance
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
Options:
- BP200/20 pump, 195 L/min. capacity, 2000kPa pressure (J99-82)
- Hydraulic drive centrifugal pump (J99-126)
- 57L Paddock marker foam marker (K99-43)
- Bravo 180S automatic rate controller (J99-146)
- Bravo 180S automatic rate controller to suit hydraulic control (in lieu) (J99-184)
- Bravo 400S automatic rate controller with GPS guidance (in lieu) (J99-182)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console) (J99-185)
- 3 Section electric over hydraulic control (J99-117)
- 5 Section electric over hydraulic control (J99-143)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1,900L SPRAY PRO SPRAYER - BP130/20 PUMP, 18M BOOM

5.4m with 54 tines, crumblers, solid rubber tyres and hydraulic lift.
Features:
Working width: 5.4m.
Fitted with 54 tines at 100mm centres.
Fitted with crumbler for a superior finish.
Fitted with solid rubber tyres, no risk of punctures and improved capacity.
Transport width when folded: 3.5m
Folding wings which offer two alternative positions: floating to follow the contour of the ground being worked, or locked to assist penetration in hard ground.
Choice of four different points for different applications.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS FOLDING WING S-TINE CULTIVATOR 5.4M - 0319

Trailed air assist Cannon Jet 2,000 litre sprayer with a 161 L/min diaphragm pump, Cannon Jet single-sided conveyor with hydraulic tilt adjustment, electric valve controls and Glideflex axle.
Specifications:
Market: Horticulture
Tank Size (L): 2000
Connection Type: Trailed
Min HP: 75
Pump Size (L/min): 161
Height / Width / Length (mm): 2500 / 1540 / 3750
Product Weight (kg): 640 (dry)
Application: Strawberries, flowers, greenhouse, vegetables, parks & gardens
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms, corrosion resistant, cast anodised aluminium body. IDS1701: 161L/min capacity, 5000kPa pressure.
Fan Size: 450mm diameter twin turbine fan with galvanised frame and spray head. Hydraulic angle adjustment and manual top wing adjustment
Nozzles: Flip-over type with ceramic hollow cone nozzles. 9 nozzles (6 in cannon head, 3 inside of cannon) with twist on/off.
Gearbox: Two speed with neutral position, oil bath type.
Controls: 40bar electric section valves, master valve, electric pressure regulator and in cab controls.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, non spill lid. 40 litre fresh water tank fitted to 2000L unit.
Frame: 500L: Galvanised steel, suit cat I & II linkage. 2,000L: Galvanised steel with jockey wheel and adjustable drawbar.
Agitation: 500L: dual bypass. 2,000L: pump bypass plus venturi agitator.
Pressure Gauge: 100mm, 0-60 bar glycerine filled gauge with bar increments.
Filtration: Lid strainer, suction line strainer and stainless steel nozzle filters.
Wheel Equipment: Glideflex suspension axle, 2x15" tubeless tyres on galvanised rims (max speed rating 30 km/h).
PTO Driveshaft: Quality driveshaft with quick release pins and safety cover. Constant velocity shaft.
HP Required: Minimum 75hp.
Options:
- Bravo 180s automatic rate controller (D99-143)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 2,000L TRAILED CANNON JET SPRAYER - MIN 75HP

Find Farm Machinery For Sale in Queensland. Browse 7615 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) - 0005

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 6MM DISCS - 0840, SUIT 60-130HP

MURRAY 4.83M 3PL HOIST LIFT DIAMOND HARROW SYSTEM 5 SECTIONS WITH SERIES 21 HOIST FRAME

NOBILI 2.09M BPR MULCHERS (70-150HP)

POLYMASTER 600L RAINWATER TANK (SLIMLINE)

BREVIGLIERI 5M MEKFOLD300 POWER HARROW (160-300HP) WITH 450MM CAGE ROLLER

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 3 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

JOHN BERENDS EHD210 CONTRACTOR SLASHERS 2.1M 0084- 75+HP

WALTERS FENCING TWO-HOLE STRAINING PLATES (BOX OF 50)

SILVAN 1,900L SPRAY PRO SPRAYER - BP130/20 PUMP, 18M BOOM

JOHN BERENDS FOLDING WING S-TINE CULTIVATOR 5.4M - 0319

SILVAN 2,000L TRAILED CANNON JET SPRAYER - MIN 75HP

Farm Supplies Machinery & Equipment

Dealer Address