Farm Supplies Machinery & Equipment

The most convenient end assembly kit. Load on and go!
Our kits are all made from steel and are either hot-dipped galvanised, galvabond or stainless steel. This means they are termite proof, fireproof and long-lasting.
These kits are perfect if you have a pneumatic driver or proper setup. If you are looking to drive your posts in by hand, we recommend you purchase our Drive-Tight strainer post kits. They take less than 15 minutes to drive your post in and install the strainer kit!
With this kit, you have the choice of an 80NB or 100NB strainer post. Each strainer post is slightly longer and thicker than your standard post, allowing you to drive it in. You can also choose between a 40NB stay (good general-purpose stay), or a 50NB stay (more heavy-duty).
Price quoted is for one kit. Kit includes...
Post, Cap, Stay, Post & Stay Connector, Footplate, & Tension Cable
Discounts apply for bulk kit purchases of 10+ or 60+.
Contact dealer for bulk pricing.
Features:
- Fast install
- Strong
- No welding
- Works on any angle
- Galvanised
Specifications:
- 100 NB (114mm O.D) post
- 4.5mm post wall thickness
- 2400mm (8') post length
- 40NB (48mm O.D) Stay
- 2.3mm Stay wall thickness
- 3250mm (11') Stay length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL DRIVABLE (HEAVY WALL) ROUND POST FENCE END KIT- 100NB X 40NB - RSAT4.5

Heavy duty strength at a light duty price.
Features:
Fitted with high tensile 50mm main pivot pin to minimise wear and tear and avoid breakage.
24 angle positions to both right and left allowing blade to work outside the tractor wheel, even at an angle.
Blade rotates 360 degrees allowing forwards and backwards operation.
Adequate tilt via the linkage pin position and tractor levelling box.
Curved 10mm thick mouldboard for strong cuts at the correct angle and high clearance for greater capacity.
Hardened, reversible cutting edges (as used on road graders).
Optional Holden depth wheel (at additional cost) with either manual ratchet or hydraulic adjustment.
Available in 6ft (1.8m), 7ft (2.1m) and 8ft (2.4m) widths.
12 Month Warranty against faulty materials or workmanship.
Specifications
Cutting Edge Width: 7ft (2.1m)
Mouldboard Thickness: 10mm
Mouldboard Height: 500mm
No Offset Positions: 8
No Angle Positions: 24
Tractor HP: 40-100
Category-3 Point Linkage: Cat 1/2
Weight: 350kg
Also available:
0035 6ft Grader Blade HD Model
0037 8ft Grader Blade HD Model
Options:
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HEAVY DUTY GRADER BLADE 7FT (2.1M) - 0036, SUIT 40-100HP

Bahco Composite Handled Hatchet. 360mm. 640g.
Features:
Soft grip composite handle Hatchet / Camping Axe. Ideal for bush regenerators, contractors & camping this hatchet features a forged carbon steel head hardened and tempered to 51 HRC.
- Head forged from carbon steel
- Entirely hardened and tempered to 51 HRC
- Sharpened blade edge
- Narrow cheeks for chopping wood
- Handle made of glass-fibre reinforced composite material
- Soft grip with hanging hole made of thermoplastic elastomer
- Delivered with a reusable head protector
- Weight: 640g
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BAHCO COMPOSITE HANDLED HATCHET (360MM)

4.64m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3411 - 4.64m (15ft 3in) - 4/9 Tine, 2/12 Tine - 88kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Provides instant liquid cut off when pistol is detached from spray hose.
- 1/2" BSP male
- Max pressure 3000 kPa / 435 psi
Ideal for quick disconnection of spray guns from hose reels featuring liquid shut-off.
Manufactured from corrosion resistant materials.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN BRASS HOSE SNAP COUPLING (COMPLETE SET)

Working Width = 2 - 12 m
Capacity = 4.0 m3
Weight = 1,620 kg
Min HP = 60 hp
Topdressing is critical to breakdown those thatch layers, thereby improving drainage and creating conditions favourable for strong grass growth. Do it with precision, with the GKB SPM.
This version of the Sandspreader comes with an additional material handler a front mounted elevator for the convenient topping up of bunkers, trenches or other routine topdressing around the golf course. Quality build for a quality operation
The SPM is constructed using high quality steel to give you long-lasting reliability. It is also highly adjustable, making it ideal for light, frequent dressings or heavier applications. It also comes with a standard overrun brake and LED lighting as standard. The SPM is available with three different hopper capacities, all of which can be connected to your tractor with a drawbar.
All trailed models in the GKB Sandspreader range come with pivoting axels as standard. It is also highly adjustable, making it ideal for light, frequent dressings or heavier applications.
The conveyor belt speed can be altered to suit the desired depth of dressing, while the hydraulically driven discs offer optimal accuracy. It also comes with a standard overrun brake and LED lighting as standard.
Optional Extras:
SPM00.09.01 - Trench Filling Unit SPM (Suits all models)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GKB MACHINES 4.0 M3 SAND SPREADER INC CONVEYOR (60+ HP)

Rapid Horse Step (570mm High)
Total Height: 570 mm
Diameter: 720 mm
Livestock Type: Horses
Rust free, long lasting multipurpose step
Ideal for mounting horses
Round shape safe for horses no sharp edges
Easy to use and carry around using cut out handle
Non-slip tread pattern on steps 3 levels
Wide base for extra stability
Available in green, red, blue, purple, pink or yellow
Specifications:
Total height: 570mm
Diameter: 720mm
Features:
Rust free, long lasting multipurpose step
Ideal for mounting horses
Round shape safe for horses - no sharp edges
Easy to use and carry around using cut out handle
Non-slip tread pattern on steps - 3 levels
Wide base for extra stability
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID PLAS 570MM HORSE STEP

The Wheel Riser series ramps are the latest addition to the Climaxx Aluminium Ramp range. As with all the Climaxx ramps, they are made from Aluminium, ensuring ease of positioning and transport. These service ramps are built for raising Heavy Vehicles off the ground for a variety of uses.
The Wheel Riser series ramps are specifically designed for applications where access to the underside of heavy vehicles is either difficult or restricted. The Climaxx Wheel Riser Ramps are suited but not limited to the following applications:
- Service Centres
- Loading Docks
- Heavy Vehicle Wash Bays
- Heavy Vehicle Inspection Areas
The Wheel Riser ramps are built to comply with the Australian Standard AS. 2640:2016. Released in 2016, this standard outlines stringent requirements in which portable ramps are to be designed and manufactured in accordance with. This standard was released as a result of sub-standard products being used which resulted in fatal injuries.
With over 40 years of experience manufacturing Loading Ramp solutions, we have designed a safe and compliant service ramp product to meet the industry requirements.
Specifications: A, B, C & D shown in picture diagram.
Rated Capacity per Axle: 7,500kg
Ramp Length (A): 1.42m
Raised Bed Length (B): 770mm
Height of Raised Bed (C): 250mm
Height of Raised Bed Including Ramp (D): 302mm
Ramp Tread Width: 400mm
Overall Ramp Width: 500mm
Models:
WR7522-40 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 400mm Ramp Tread Width, 500mm Overall Ramp Width.
WR7522-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
WR7536-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 2,170mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 77CM BED, 1.42M RAMP (50CM RAMP WIDTH)

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Can be offset in seconds to work outside the tractor wheel to the left or right hand side.
Choice of 5 positions each way to a maximum of 600mm offset.
Alternative holes for the lower linkage arms, provide ample tilt for V-draining.
Provides 30 degree tilt each way.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 6ft
Mouldboard Thickness: 8mm
Mouldboard Height: 450mm
Tractor HP: 30-60
No of Offset Positions: 9
Weight: 260kg
Options:
0009 Grader Blade Wheel Kit
0419 Boxed ends suit Medium Duty model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) WITH 4 RIPPERS - 0006,SUIT 30-60HP

4 in 1 Bucket 8000 series - 1.50m. Includes Log Teeth as standard.
The 4 in 1 bucket has many advantages over the standard bucket including...
- Allows the operator to open the bucket to release material instead of dumping the material.
- When the bucket is opened, the exposed blades on the rear and front end of the bucket can be used for earthmoving activities.
- Allows the clamping of objects and is ideal for picking items like broken branches.
Specifications:
- Width (m): 1.50m
- HP Range: 50-100
- Struck Capacity (m3): 0.31
- Rated Capacity (m3): 0.39
- Dimensions LxWxH (mm): 1560 x 730 x 720
- Weight (kg): 400
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 4 IN 1 BUCKET 8000 SERIES 1.50M - 50-100HP RANGE - INCLUDES LOG TEETH

These heavy duty mulching mowers designed for a variety of mulching applications from rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
High tip speed of 235kph allows a higher cutting ground speed resulting in superior mulching ability. Also with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features:
Large adjustable back flap can be completely opened to allow quick release of material especially beneficial in heavy vegetation.
Fineness of mulching material can be controlled using the unique internal, adjustable mulching bar.
Standard with adjustable skids.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti wire rotor guard.
Optional adjustable rear roller and wheels are available for depth control.
Also available:
0123 Cyclomatic High-Body 1800 (6) Offset Mulcher
Specifications:
Cutting Width: 1.75m
Overall Width: 2m
Body Height: 900mm
Weight: 660kg
Tractor HP Range (approx): 57-86
Blade Tip Speed: 235km/hr
Rotor Speed at 540rpm: 2268rpm
No Y Blades (Standard): 40
No Tee Hammers (Flails)(Optional): 20
NO SPB vee belts: 3
Rotor Size: 168x11mm
Alignment (Adjustable): Offset/Centre
Options:
1613 Mulcher Adjustable Pair Solid Rubber Wheels
1777 Roller Kit c/w Bearings to Suit 1800 High Body Mulcher
BELTPW Optional Power Wedge Belts Suits High Body Mulcher
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC HIGH BODY 1800 (6') CENTRE LINE MULCHER - 0151 - 57-86HP

Square Hay Tine (Conus I) OD 1 7/16" (36.51mm). 221153 with point.
Specifications:
Length: 1240mm
Weight: 5kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1,240MM SQUARE HAY TINE (CONUS I) (OD 1 7/16" / 36.51MM)

Find Farm Machinery For Sale in Queensland. Browse 7523 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

ROTECH RURAL DRIVABLE (HEAVY WALL) ROUND POST FENCE END KIT- 100NB X 40NB - RSAT4.5

JOHN BERENDS HEAVY DUTY GRADER BLADE 7FT (2.1M) - 0036, SUIT 40-100HP

BAHCO COMPOSITE HANDLED HATCHET (360MM)

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

SILVAN BRASS HOSE SNAP COUPLING (COMPLETE SET)

GKB MACHINES 4.0 M3 SAND SPREADER INC CONVEYOR (60+ HP)

RAPID PLAS 570MM HORSE STEP

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 77CM BED, 1.42M RAMP (50CM RAMP WIDTH)

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) WITH 4 RIPPERS - 0006,SUIT 30-60HP

BURDER 4 IN 1 BUCKET 8000 SERIES 1.50M - 50-100HP RANGE - INCLUDES LOG TEETH

JOHN BERENDS CYCLOMATIC HIGH BODY 1800 (6') CENTRE LINE MULCHER - 0151 - 57-86HP

BURDER 1,240MM SQUARE HAY TINE (CONUS I) (OD 1 7/16" / 36.51MM)

Farm Supplies Machinery & Equipment

Dealer Address