Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 4130kg
No. of Bearings: 24
No. of axles: 12
Cutting width: 5.71m (18ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

7 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
Rata Panerazer subsoilers are designed specifically for use in ground where compaction has occurred. All Rata subsoil aeration equipment features a double bar V frame construction for a better job and easier pulling.
Check out the video to see them in operation and the finish after use.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build with 16mm wear protected legs securely bolted into mounts that are completely welded and gusseted onto the heavy RHS mainframe for strength.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 7 TINE/DISC SUBSOIL CULTIVATOR (150HP RECOMMENDED)

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3500kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 3.88m (12ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 24 INCH DISCS - 0973

Euro Hitch 2.6m Power Claw with three pivots.
Made in New Zealand.
Power Claw Features:
- Good for: rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish and much more
- Exceptional clamping force
- 16mm super high strength tines
- Made with industry leading AR450 grade steel tines!
- Opens to 1.3m between tine points
- Superior alternative to a stick rake
- Supplied with FREE storage stand
Price includes euro hitch as standard unless specified. Other hitches upon request.
Previously known as the Versatile Grapple, this Claw can be fitted to almost any loader or material handler. It must be the most useful tool you can think of because of due to the number of applications & tasks it can be used for. These include - rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish and much more.
The exceptional clamping force and 16mm AR450 Abrasion Resistant super high strength tines make this grapple a true multi tasker. Interlocking tines ensure excellent grip & clamping force.
PC260 specs:
Weight = 580kg
HP required = 130+
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.6M POWER CLAW (130+HP) EURO HITCH

Tungsten tooth (right hand) wear part to suit MT trencher range.
Auger Torque provide a range of wear parts to ensure your trencher is always performing at its optimum efficiency.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE TUNGSTEN TOOTH (RIGHT HAND) WEAR PART TO SUIT MT TRENCHER RANGE

Made in Canada
Suits 1,371 (54") - 2,260 mm (89) tyres
Features:
- Efficiently handle large tyres without physical stress, safety risks and additional personnel
- Extended reach gripper and 50° rotation
- 3-arm configuration balances the tyre perfectly
- Industry-certified and engineer-approved
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Length = 2,108 mm
Width = 2,108 mm
Height = 1,117 mm
Teeth Length = 660 mm
Load Capacity = 1,814 kg
Swing - 900 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO TYRE GRABBER SUITS 1371MM (54") - 2260 MM (89") TYRES

Features:
80HP single speed gearbox (540 RPM).
Phased rotors 200mm pitch.
Head stock centre mounted.
Leveling bar standard.
Floating side shields.
1680mm working width.
80 270mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF80-170CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 60-80 HP
No. of Blades: 16
Working Width (mm): 1680
Product Weight (kg): 440
Total Width (mm): 1730
MF80-170PR Specifications (with Packer Roller):
Connection Type: Linkage
Min PTO HP: 60-80 HP
No. of Blades: 16
Working Width (mm): 1680
Product Weight (kg): 530
Total Width (mm): 1730
Factory Options:
Stone Collar Protection
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI MEKFARMER 80 POWER HARROWS 1.68M - BREVIGLIERI - MF80-170CR, MIN 60-80HP

Features:
90 HP single speed gearbox.
2050mm working width.
Side gear drive.
CE safety guards.
54 x C Blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 60-90 HP
Working Width: 2050mm
Working Depth: 100-200mm
Product Weight: 585kg
Total Width: 2300mm
Options:
Front Depth Wheels
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 2.05M B85 ROTARY HOE (MIN 60-90HP)

Your solution to Move Better.
An exclusive mechanical override braking system allowing high allowable payloads, combined with a heavy-duty design & construction.
Available in both an Aluminium or Galvanized Steel framed option:
SW2600 - With a lightweight aluminium frame, and exclusive componentry, the all new SW2600 is everything a machine operator requires in a Trailer.
SW2700S - A heavy-duty galvanised steel frame, and exclusive componentry, the all new SW2700S is the ultimate durable Plant Trailer.
Specifications:
Aggregate Trailer Mass: 2,600kg
Allowable Payload: 2,200kg
Tare Weight: 400kg
Deck Width: 1,400mm
Deck Length: 1,900mm
Bucket Rest Length: 1,140mm
Total Trailer Length: 4,700mm
Features:
Australian Approved Mechanical Override Braking System
Custom Colour Powder coated Guards
Lightweight Aluminium Ramps
New 13 Steel Wheels & Tyres
Sealed for Life Bearings
Lockable Head for Anti-Theft
Auto Reverse Braking System
Multi-Volt L.E.D Lighting
6x Tie Down Points
Heavy Duty Swivel Jockey Wheel
Rubber Torsion Bar Suspension
HDPE Plastic Bucket & Blade Rest (SW2600 only)
Options:
JCH2435 - Lockable Jerry Can Holder
LRK2435 - Load Restraint Kit
TC70 - Tow Coupling 70mm (non-standard)
TB70 - Tow Ball 70mm (non-standard)
WTU14 - Upgrade to 14" Alloy Wheels
WTU16 - Upgrade to 16" Alloy Wheels
WTS13 - Wheel & Tyre, Spare, 13" Steel (Supply only)
WTS14 - Wheel & Tyre, Spare, 14" Steel (Supply only)
WTS15 - Wheel & Tyre, Spare, 15" Steel (Supply only)
WTS16 - Wheel & Tyre, Spare, 16" Steel (Supply only)
WTA14 - Wheel & Tyre, Spare, 14" Alloy (Supply only)
WTA16 - Wheel & Tyre, Spare, 16" Alloy (Supply only)
WM1416 - Spare Wheel Mount
AM2435 - Auger Stands
RPU2435 - Roller Package Upgrade
Models:
SW2600 - 2,600kg Aggregate Trailer Mass, 2,200kg Allowable Payload, 400kg Tare Weight, 1,400mm Deck Width, 1,900mm Deck Length, 1,140mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW2700S - 2,700kg Aggregate Trailer Mass, 2,200kg Allowable Payload, 500kg Tare Weight, 1,350mm Deck Width, 2,900mm Deck Length, 550mm Bucket Rest Length, 5,000mm Total Trailer Length.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2,200KG PAYLOAD NEXXGEN TRAILER WITH 2,600KG A.T.M AND 400KG TARE

The Mower Series along with the ATV Series are a recent introduction to the Climaxx ramp range. Ideal for Government Departments, Maintenance Contractors, and serious Domestic users.
Featuring impressively low weights whilst maintaining SureWelds full level of quality, these versatile models are the solution to a need for dependable light duty Ramps in keeping with the expectations of Australian operators.
Mower Series ramps are curved for low clearance applications in comparison with the ATV Series which are of straight design.
They are available as rigid (Model: 6/04521ATV) or with a folding section (Models: 6/04521ATVF, 6/042521LCF) for ease of transport.
A distinctive feature of these Ramps is their adaptability to varying loading heights and bearing surfaces.
Suitable for use with lightweight machinery such as Ride-on Mowers. Suitable for use with pneumatic tyres. Not suitable for use with steel tracks. Not suitable for use with solid tyres.
SureWeld are a leading supplier of Australian Made quality Aluminium Loading Ramps.
Specifications:
Rated Capacity: 450kg
Ramp Mass: 6kg
Ramp Length: 2.1m
Folded Length: N/A
Overall Width: 275mm
Internal Width: 240mm
Features:
Foot adaptable to varying gradients.
Tread Surface of Mower Series Ramps.
Hook or Steel Pin Connection.
Models:
6/04521ATV - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, N/A Folded length, 275mm Overall Width, 240mm Internal Width.
6/04521ATVF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
6/042521LCF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
*The 6/042521LCF is curved for low clearance applications such as loading of ride-on mowers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2.1M RIGID CLIMAXX LOADING RAMP FOR ATV

Heavy duty strength at a light duty price.
Features:
Fitted with high tensile 50mm main pivot pin to minimise wear and tear and avoid breakage.
24 angle positions to both right and left allowing blade to work outside the tractor wheel, even at an angle.
Blade rotates 360 degrees allowing forwards and backwards operation.
Adequate tilt via the linkage pin position and tractor levelling box.
Curved 10mm thick mouldboard for strong cuts at the correct angle and high clearance for greater capacity.
Hardened, reversible cutting edges (as used on road graders).
Optional Holden depth wheel (at additional cost) with either manual ratchet or hydraulic adjustment.
Available in 6ft (1.8m), 7ft (2.1m) and 8ft (2.4m) widths.
12 Month Warranty against faulty materials or workmanship.
Specifications
Cutting Edge Width: 7ft (2.1m)
Mouldboard Thickness: 10mm
Mouldboard Height: 500mm
No Offset Positions: 8
No Angle Positions: 24
Tractor HP: 40-100
Category-3 Point Linkage: Cat 1/2
Weight: 350kg
Also available:
0035 6ft Grader Blade HD Model
0037 8ft Grader Blade HD Model
Options:
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HEAVY DUTY GRADER BLADE 7FT (2.1M) - 0036, SUIT 40-100HP

The Munro Multi-Sett is the machine for all your every day fencing jobs.
This labour saving, all weather system is easy to operate and capable of installing posts up to 8ft.
Its speed and accuracy of setting makes it one of the most efficient and economical machines on the market.
Combines, in one machine, a fast action earth auger for drilling a pilot hole, with a powerful post driver for setting a tight post every time.
Handles all types of posts with ease...
Steel
Star
Treated pine
Concrete
Split
Square
Round
Railway sleepers
Powerful, Flexible, Tough Hydraulic reversible auger drive with a wide range of augers for different post sizes and ground conditions.
Forward, aft and sideways tilts combined with a wide base and two separate stability pads allows safe and efficient operation on hills or sloping ground.
Precise ergonomically located controls allow posts to be set quickly and accurately without fuss.
Has low overall height but still copes with normal posts.
Firm and Fast post setting, with feather touch controls
The 227kg (500lb) post driving dolly is under the full control of the operator at all times.
Variable Dolly control allows a few small taps to start the post, followed up by full stroke hits will drive the post to the required depth quickly.
The inbuilt hydraulic damper at the top of the dolly stroke cushions the dolly, reducing mechanical fatigue and increasing cylinder life.
The dolly can be stopped at any point in its downward stroke without damage to the machine. The squelch valve safely dissipates all of the load created by stopping the dolly suddenly.
Optional Items include the following...
Power Pack Kit (to drive off the PTO shaft for tractors which do not have suitable remote hydraulics. A hydraulic power pack is available which uses the tractors PTO shaft.)
Side Shift (rear mounted Hydraulic)
Double Side Shift (operates both sides)
Additional Driving Weights
FenceMate Hydraulic Wood Borer with5/8 drill chuck
Skid Steer Attachment Plate
FEL Mounted Wire Winder with Euro Hitch
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO MULTISETT POST DRIVER INCL AUTODIGGER & TILTS

Find Farm Machinery For Sale. Browse 7619 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

RATA 7 TINE/DISC SUBSOIL CULTIVATOR (150HP RECOMMENDED)

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 24 INCH DISCS - 0973

RATA 2.6M POWER CLAW (130+HP) EURO HITCH

AUGER TORQUE TUNGSTEN TOOTH (RIGHT HAND) WEAR PART TO SUIT MT TRENCHER RANGE

HIMAC EURO TYRE GRABBER SUITS 1371MM (54") - 2260 MM (89") TYRES

BREVIGLIERI MEKFARMER 80 POWER HARROWS 1.68M - BREVIGLIERI - MF80-170CR, MIN 60-80HP

BREVIGLIERI 2.05M B85 ROTARY HOE (MIN 60-90HP)

SUREWELD 2,200KG PAYLOAD NEXXGEN TRAILER WITH 2,600KG A.T.M AND 400KG TARE

SUREWELD 2.1M RIGID CLIMAXX LOADING RAMP FOR ATV

JOHN BERENDS HEAVY DUTY GRADER BLADE 7FT (2.1M) - 0036, SUIT 40-100HP

MUNRO MULTISETT POST DRIVER INCL AUTODIGGER & TILTS

Farm Supplies Machinery & Equipment

Dealer Address