Farm Supplies Machinery & Equipment

400 Litre Active Diesel Free Standing Tank
Includes Plate w/ suction access & filler cap, drain plug, pins.
Ideal auxiliary diesel tanks for generators, irrigators & more! Designed for transport, our poly Active Diesel tanks are built strong with the ability to flex and handle stresses from chassis movement.
Available Sizes:
20 - 10,000L
Multi Function 'No Spills Fill' Tank Lid System:
Our tank lid systems incorporate an innovative and unique splash resistant breather system, pad-lockable filler cap with strainer & anit-loss chain, spill containment lip, removable plate to allow access to the tank & an earth strap to prevent static build up
Toughest Tanks:
For over 20 years Rapid Spray has been manufacturing the toughest poly diesel tanks on the market. Manufactured with diesel grade poly which complies with International Regulation ECE R34.01, we back our diesel tanks with an impressive 15 year warranty!
Secure Pin Mount System:
Your Active Diesel tank comes standard with FREE pins to use for secure mounting of your tank to any flat surface. The pin mount system is a proven secure and reliable mounting system and is used to secure transport tanks as large as 15,000L
The toughest diesel tanks! Choose from a complete range of sizes from 20 to 10,000 litres.
Features:
- Tough Australian made poly diesel tank with 15 year warranty
- Manufactured with approved diesel grade poly to ensure your tank is built for the job
- Complies with relevant sections of AS1940-2004 & AS2809.2-2008
- Innovative splash resistant breather system specifically designed for diesel transport
- Pad-lockable filler cap with strainer & safety chain to prevent loss
- Removable plate allows access to tank & 2 inch suction tube access
Specifications:
- Weight kg: 28
- Dimensions mm: 1190Lx1050Wx530H
Optional Ball Baffles to greatly improve stability. Complies with load restraint guide performance standard.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY 400L ACTIVE DIESEL FREE STANDING TANK

Hinge joint strainer 900mm.
To strain up your fence wire, the tried and true method is to use a Chain Strainer. For straining up a mesh fence you will need 2 Chain Strainers connected to a Mesh Clamp.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS HINGE JOINT STRAINER 900MM

Replacement 50cm plastic wand for Solo 456 / 457 / 425LC / 425 / 475 sprayers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOLO 50CM PVC SPRAY WAND (SUITS 456, 457, 425LC, 425, 475 SPRAYERS)

Rapidseal Joiner (90mm)
Features:
- Rapidseals enable a watertight connection through rainwater tank walls
- Rapidseals provide a quick and easy solution suitable for use as overflows and rainwater tank connection systems
- Rapidseals can be fitted through corrugations as well as slight curves in tank walls does not need a completely flat surface
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS RAPIDSEAL JOINER (90MM)

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 5MM SCALLOP DISCS - 0853, SUIT 75-165HP

350mm - 1 Series Auger for Post Hole Borer.
Standard conditions - Tungsten Carbide.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl One man Style 25mm Round
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 350MM AUGER (STANDARD-TUNGSTEN CARBIDE) FOR 1 MAN BORER

Comprises a nylon body with a 1/2" x 1/2" barb and is a servo-assisted solenoid.
- Ideal for fitting to single spray bars and features Viton diaphragms
- Requires 12V power and has pressure loss of 5psi across valve
- Max pressure 1000 / 145 kPa / psi
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN GOYEN ELECTRIC SOLENOID VALVE (1/2" X 1/2" BARB - FLAT)

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

Technical Specifications:
- Engine | Honda GX35 4-stroke, air-cooled
- Displacement | 35.0 cc
- Max Power | ~1.6 HP
- Starting System | Recoil Start
- Fuel | Unleaded
- Cutting Bar | 10"
- Telescopic Length | 2.93.9m
- Weight | 8kg (without cutter end)
Engineered for precision pruning and effortless reach, the Powertech Honda Telescopic Pole Saw combines reliable performance with user-friendly design. Whether youre trimming tall trees, shaping hedges, or clearing roadside brush, this versatile tool helps you work safely from the ground.
Key Features:
Honda GX35 Engine: Ultra-reliable 4-stroke engine known for smooth starting, fuel efficiency, and durable performance.
Telescopic Boom: Extends to reach up to 3.9m (adjustable) for tall branches without a ladder.
Powerful Cutting Bar: 10" / 3/8 Oregon bar and chain for fast, clean cuts.
Lightweight Construction: Optimized chassis and balanced weight distribution for easy handling.
Easy Start & Maintenance: Recoil start system, accessible air filter, and simple oil changes.
Attachments: Interchangeable head eg. Hedge Trimmer option
Benefits:
Safe Tall-Tree Pruning:** Reach high branches without ladders, reducing fall risk.
Hedge and Shrub Shaping:** Precision trimming for manicured hedges and topiary.
Storm Clean-Up:** Quick removal of broken limbs after storms.
Ground-Safe Operation:** Low-vibration design minimizes fatigue during long sessions.
Professional-Grade Durability:** Built to withstand heavy seasonal use with regular maintenance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH HONDA TELESCOPIC POLE SAW

225MM RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 225MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

Description
RZ Range RLC Leaf Spring Rippers 3m R9-3
Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available. This is the Fixed Frame version.
Specifications
Working Width: 300cm
Required HP: 125-200hp
Rippers: 9
Fixed Frame.
Features
Double clamp bolt-on legs.
Adjustable leaf spring.
Heavy duty 100x100mm box section.
Adjustable rubber depth wheels.
865kg breakout.
Reversible chisel point.
Solid steel legs.
Options
Rear rollers.
Rubber depth wheels (2×600-9)
Wing share.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (9 RIPPERS)

To Suit Telehandler.
Sliding Tine Fork
The sliding tine pallet fork allows the pallet tines to slide effortlessly across the bar and can be adjusted indefinitely to suit requirements.
The safety locking system is introduced to ensure maximum safety during operation.
The pallet forks are manufactured to suit most loaders as well as customised to suit individual loaders.
The fork tines are extremely durable as it is made of heavy duty forged steel tines.
Burder quick change hooks are standard and other mounts are available upon request.
Specifications:
- Tines: Sliding Tine Floating
- Rated Capacity (kg): 2000
- Width: 1200mm
- Weight (kg): 330
Options:
- Top Grab
- Hydraulic Side Shift for 1 Tine
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER SLIDING PALLET FORKS - 2000KG CAPACITY

Find Farm Machinery For Sale. Browse 7532 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

RAPID SPRAY 400L ACTIVE DIESEL FREE STANDING TANK

LEMPRET WIRE & SEALANTS HINGE JOINT STRAINER 900MM

SOLO 50CM PVC SPRAY WAND (SUITS 456, 457, 425LC, 425, 475 SPRAYERS)

RAPID PLAS RAPIDSEAL JOINER (90MM)

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 5MM SCALLOP DISCS - 0853, SUIT 75-165HP

DIGGA 350MM AUGER (STANDARD-TUNGSTEN CARBIDE) FOR 1 MAN BORER

SILVAN GOYEN ELECTRIC SOLENOID VALVE (1/2" X 1/2" BARB - FLAT)

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

POWERTECH HONDA TELESCOPIC POLE SAW

DIGGA 225MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (9 RIPPERS)

BURDER TELEHANDLER SLIDING PALLET FORKS - 2000KG CAPACITY

Farm Supplies Machinery & Equipment

Dealer Address