Farm Supplies Machinery & Equipment

Australian Made to suit the harsh Australian environment
Weighing 13.5kg for the CHPD52 (smaller model) and 16.3kg for the CHPD78 (this model). Both models are lightweight and portable but still able to drive posts as swiftly as much larger and heavier hydraulic and pneumatic tools.
The high impact hammer action of 1780BPM will drive steel fence pickets into the hardest ground in a matter of seconds and the portable design allows operators to move along a fence line with ease. The driver uses an efficient Honda GX50 4-stroke motor to give the best service life possible.
The CHPD52 (other model) has a 52mm receiver guide tube which allows most standard posts and pipe up to 50mm diameter, as well as timber 35mm square to be driven, while the CHPD78 (this model) has a redesigned lower hammer section to allow much larger posts and pipe to be driven right up to 75mm diameter without any other adapters. The redesigned lower hammer transfers the impact to the post more efficiently allowing larger posts to be driven with ease.
Blows Per Minute - 1780
Joules - 26
KW - 1.5 (2.0hp) at 7,000 rpm, 4-stroke, overhead cam Trigger throttle with integrated stop button, Spring isolated hand grips
Fuel Consumption - 0.7 L/h at 7,000 rpm. Meets strictest worldwide emission and noise requirements
Starting System - recoil (pull start)
Rating - Continuous use on standard posts
Weight - 16.3kg
Engine Warranty - 3 Year genuine Honda warranty
Post Driver Warranty - 12 months parts failure
Noise Level - 100dB Hearing protection required
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE

CHRISTIE CHPD78 - 75MM POST DRIVER

Muthing "M" Carbide Shackle Flail (new model).

MUTHING "M" CARBIDE SHACKLE FLAIL (ONLY) - SHORT (NEW MODEL)

Power Harrow Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX POWER HARROW BLADE - 100 X 15 X 300MM (RH)

This separator has a throughput of 80L / hour turning the crank at a comfortable 60-70rpm. Bowls capacity is 12L.
Cream density is adjustable. The body of this machine is made of cast metal, to give maximum strength. The bowl and upper components are all polycarbonate, giving clarity, easy cleaning, and high impact resistance.
This is a good quality smooth-running machine.
Dimensions: 50cm high, 36cm diameter bowl. Weight: 7.5kg.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF MOTOP 80L MANUAL CREAM SEPARATOR

Pear Linch Pin Small Bucket. (150 pieces)
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 140 REAR & SIDE MULTI PURPOSE FLAIL MOWER

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features:
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0128 Cyclomatic 2400 (8) Offset Mulcher
Specifications:
Cutting Width: 2.35m
Overall Width: 2.6m
Body Height: 500mm
Weight: 580kg
Tractor HP Range: 64-96
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 56
No of Tee Hammers (Flails) (Optional): 28
No of SPB vee belts: 4
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 2400 (8') CENTRE LINE MULCHER - 0129, 64-96HP

Murray 2.90m, Series 04 Diamond Harrow 3PL hoist lift type system with Series 21 Hoist Frame.
4030 - 3 sections - 2.90m.
Complete Set Comprises:
Front Lift Drawbar
Harrow sections
Rear Lift Drawbar
and Series 21 3 Point Linkage Hoist Frame.
Suitable for open country and lighter loamy soils, Murray Diamond Harrows are an effective implement used for weed control and final seedbed preparation.
Specialising in shattering soil crusts allowing improved aeration and moisture penetration, it will give your crops every chance of reliable germination and subsequent vigour.
The Diamond frame design is constructed using flat bar material providing the Harrow with strength and rigidity. It features replaceable bolt-in 16mm square section High Carbon Steel tapered tines with a working depth between 50 to 80mm (2 to 3).
Murray Diamond Harrows are supplied in sets complete with drawbars, ranging from 2 sections 2.03m (68) to 10 sections 10.16m (334). Lift type sets using our 3 Point Linkage Hoist Frame (Series 21) are available, making transportation of your Harrows easy and convenient. The complete set is comprised of a Front Lift Drawbar, Harrow Sections, Rear Lift Drawbar and 3 Point Linkage Hoist Frame (Series 21).
Features:
- 2 Point Pull (2PP). Replaceable bolt-in 16mm square section High Carbon Steel tapered tines.
- Manufactured from flat bar material
Specifications:
- 30 kg (66lb).
- Coverage 0.97M (38").
- Tine Spacing 51mm (2").
- Tine Length 152mm (6") approx
- Centre to centre of Front Hooks 508mm (20").
- 5 Rank / 20 Tines.
- Tapered Tines with working depth between 50-80mm (2" - 3")
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.90M 3PL HOIST LIFT DIAMOND HARROW SYSTEM 3 SECTIONS WITH SERIES 21 HOIST FRAME

Simple & Strong. Need an auger for your wooden fence posts? Our hard wood augers make installing your latches a breeze.
Our augers are perfect for drilling clean holes through your timber posts. We have a wide variety of sizes for a multitude of uses:
Our smaller sizes are excellent for drilling holes for latches and for holes to run wire through.
The 18mm and 20mm augers provide a great fit for our gate kits.
We also provide bigger sizes which are better for drilling holes to run barb wire through your posts.
If you are purchasing an auger to install a gate kit, we recommend you use a slightly larger sized auger. For example, if you are getting a 16mm gate kit, get the 18mm auger. If you need to pull the gate kit out in the future the larger hole will make it easier. It will simply slide in and out with minimal hassle.
Important! Use your Auger Correctly. Every brand of wood auger is engineered slightly different. Its critical that the auger is used how the manufacturer intended. There are important features of these augers:
These augers have a coarse thread for faster penetration at low revs (250rpm). Let the auger do the work. All you need to do is hold the drill straight (dont try and push it through the post). If its a big post, pull the auger out occasionally to help remove the wood chips. Each auger includes a cutting head with obtuse angles. This decreases the frequency between sharpens, minimising your downtime.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Contact dealer for bulk pricing.
Specifications:
- 29mm auger
- 450mm overall length
- 375mm flute length
- 8mm screw
Features:
- Strong
- Simple to use
- Designed to work with our gate kits
- time saving
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL HARDWOOD AUGER 29MMX450MM - HA29450

Old Timer knives are what the name suggests, made in proven styles and standards. Schrade knives are known for their high quality. "Knives like granddad's" is their slogan.
If treated with reasonable care, these knives will last a lifetime.
The Old Timer range of knives feature long-lasting all-weather nylon handles with a grip surface and end bolsters of nickel-silver.
Blades are high Rockwell quality fine-edge rust-resistant carbon steel, except where noted as stainless steel. The selection we show here is the most suitable for the rural user.
The middle Stockman is a 3-blade general purpose stock knife. Carbon steel blades. Blade variety to suit all tasks.
The dimension shown is the closed length overall for pocket (folding) knives.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

OLD TIMER 8.5CM MIDDLEMAN STOCKMAN

The Agrivator AV Series is a 3pt linkage mounted rolling tine aerator. Ideal for shattering and allowing water absorption into the soil and expansion of root zone in pasture and crops.
Australian Made
Also available in Galvanised Body (optional).
Features...
Heavy duty frame design
Extra large capacity rotor bearings (greasable)
High wear resistant tines
Tow hitch for harrows etc
4 x angle settings for rotors 0-10°
Cat 1 and 2 hitch
Cat 3 on all H models (hydraulic fold)
Park stands x 4 for storage
Painted or Galvanised main frame
Agrifarm AV series Aerators are pre-bracketed in manufacture to suit Optional Extras. Please see these optional items below:
(Optional) ASB Seeders and mounting kit are available for AV150, 200, 250, 300, 400, 400H, 500H and 600H...
Available in modules of 900mm width
Mounted on rear RHS member of frame
Capacity 22 litres per module
(Optional) Spring Tine Harrows available to suit AV150, AV200, AV250, AV300, AV400, 400H, 500H and 600H Aerators include...
2 rows of Spring Tines
Quick 2 pin location for transport
2 pin removal if harrows aren't required
Close to rear of machine for exceptional manoeuvrability.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM AV150 AGRIVATOR AERATOR SERIES (1.5M)

Heavy duty slashers designed for tough conditions.

JOHN BERENDS TWIN ROTOR SLASHERS 2.4M - 0101, 50+HP

Find Farm Machinery For Sale. Browse 7657 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

CHRISTIE CHPD78 - 75MM POST DRIVER

MUTHING "M" CARBIDE SHACKLE FLAIL (ONLY) - SHORT (NEW MODEL)

SPAREX POWER HARROW BLADE - 100 X 15 X 300MM (RH)

SHOOF MOTOP 80L MANUAL CREAM SEPARATOR

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

MUTHING MU-H/S 140 REAR & SIDE MULTI PURPOSE FLAIL MOWER

JOHN BERENDS CYCLOMATIC 2400 (8') CENTRE LINE MULCHER - 0129, 64-96HP

MURRAY 2.90M 3PL HOIST LIFT DIAMOND HARROW SYSTEM 3 SECTIONS WITH SERIES 21 HOIST FRAME

ROTECH RURAL HARDWOOD AUGER 29MMX450MM - HA29450

OLD TIMER 8.5CM MIDDLEMAN STOCKMAN

AGRIFARM AV150 AGRIVATOR AERATOR SERIES (1.5M)

JOHN BERENDS TWIN ROTOR SLASHERS 2.4M - 0101, 50+HP

Farm Supplies Machinery & Equipment

Dealer Address