Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3290kg
No. of Bearings: 12
No. of axles: 4
Cutting width: 3.43m (11ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

Dimensions : 3,492 L x 580 W x 350 H
Capacity : 250 L
Say goodbye to wasting water and time cleaning your troughs.
With Sweep Troughs, cleaning is a breeze. Our troughs are designed to sweep out the dust that settles on top and then turns to sludge at the bottom. And the best part - Using our sweep brooms, you dont have to empty the trough to clean it. Just sweep it out.
Upgrade your farm yard today and make cleaning your troughs a hassle-free experience.
The perfect solution for those in need of a durable and portable drinking option for your animals. With our rust-resistant sweep troughs, you can leave them outside without any fear of corrosion or damage.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 250L SWEEP TROUGH (25MM VALVE)

O.D = 1/2 "
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1/2" O-RING (O.D)

2 stage forklift. Mounted height at 300 ground clearance.
Burder builds 2 stage and 3 stage mast forklifts. The 2 stage mast is suitable for users with low height requirements. The 3 stage mast is the most common build for forklifts and is suitable for users who require more lift height than the 2 stage mast forklift.
Specifications:
Lift Height: 2000mm
Approx. Mast Height: 1700mm
Capacity: 300kg Min, 600kg Max (further info in images)
Mast Weight: 500kg
Options:
Quick detach sub frame & compact tilt mechanism
Super steer sub frame
Side shift requires extra circuit on valve including hoses on mast
Hoses for tractor remotes 2ccts mid or rear
Hoses for tractor remotes 3ccts mid or rear
2 bank valve
3 bank valve ROPS only
4 bank valve ROPS only
Joystick for ROPS
Cables and joystick
3rd function electric
3rd & 4th function electric
1 x extra hose on mast including couplers
2 x extra hose on mast including couplers
Linkage mount including tilt ram
Fixed high back frame
Bolt on high back frame
Tine retainers (Anti Flip-Up)
Hydraulic soft ride (included in 4.2m & 5.2m units)
Hydraulic soft ride electric
Quick detach hooks for subframe
Weight sensor (pressure sensor in lift circuit, screen in cab) - Dinamica generale fork
Couplers on side shift rams & hoses
Anti-drop valves counterbalance style per circuit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 600KG, 2M LIFT HEIGHT FORKLIFT

Long lasting & strong. Looking for some strong galvanised steel fence posts? Our drivable steel posts are perfect for the job.
Price quoted is for one post.
Discounts apply for bulk kit purchases of 10+ or 60+.
Features:
- Easy install
- Termite proof
- Fire resistant
- Galvanised
Specifications:
- 80NB (89mm O.D) post
- 4mm post wall thickness
- 2100mm (7') post length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL DRIVABLE ROUND STEEL POST 80NB X 2100MM- RSP804.0

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0120 Cyclomatic 2100 (7) Offset Mulcher
Specifications:
Cutting Width: 2.05m
Overall Width: 2.3m
Body Height: 500mm
Weight: 540kg
Tractor HP Range: 56-84
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 48
No of Tee Hammers (Flails) (Optional): 24
No of SPB vee belts: 4
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift (Does not suit 0122 model)
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 2100 (7') CENTRE LINE MULCHER - 0150,56-84HP

1.5m Silage Grab (9 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 1.5M SILAGE GRAB

Series 56 Murray Hydraulic Bale Brab - 12 bale.
Features:
- High Strength Steel Bale Hooks
- Heavy Duty Frame & Bale Fence
- Fence is removable or able to swapped from R/ hand to L/ hand
- Able to be fitted with appropriate attachment mechanism to suit tractor, load or telehandler.
Specifications:
- 12 bale
- Weight: 620kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY HYDRAULIC BALE GRAB- 15 BALE, 3PL- SERIES 56

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50
RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 28
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
2.8m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.8M S-TINE (28 TINES) STANDARD CULTIVATOR - MIN 56HP

7mm Calving Rope Single Eye - Pair.
These ropes are most useful for all normal uncomplicated calving assistance.
Length 1.1m.
Sold as a pair.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SHOOF CALVING ROPE 7MM SINGLE EYE - PAIR

Medium duty rotary hoe suitable for tractors up to 120hp.
Specifications:
Actual Width: 232cm
Working Width: 210cm
Required HP: 75-120hp
Weight: 690kg
No of Blades: 48
Features:
Rated up to 120hp
PTO 540rpm 4 speed gearbox (155-180 models)
PTO 1000rpm 2 speed gearbox (205-305 models)
Swinging lower links
Gear side drive
80x7mm L blades
6 blades per flange
250mm working depth
Side skids
Adjustable scroll tailgate
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike rotor (30x30x170mm spikes) c/w 2 piece adjustable tailgate (180-305 only)
Anti-pan (straight blade) rotor c/w 2 piece adjustable tailgate (180-305 only)
Roller Options:
Cage Roller (385mm diameter)
Ergon 155 = 860kg with roller
Ergon 180 = 880kg with roller
Ergon 205 = 920kg with roller
Cage Roller (440mm diameter)
Ergon 230 = 980kg with roller
Ergon 255 = 1050kg with roller
Ergon 280 = 1110kg with roller
Ergon 305 = 1180kg with roller
Packer Roller (420mm diameter)
Ergon 155 = 920kg with roller
Ergon 180 = 1000kg with roller
Ergon 205 = 1080kg with roller
Packer Roller (470mm diameter)
Ergon 230 = 1160kg with roller
Ergon 255 = 1240kg with roller
Ergon 280 = 1300kg with roller
Ergon 305 = 1380kg with roller
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models
ERGON120-155 160cm Working width 60-120hp 600kg 36 Blades
ERGON120-180 185cm Working width 70-120hp 650kg 42 Blades
ERGON120-205 210cm Working width 75-120hp 690kg 48 Blades
ERGON120-230 235cm Working width 80-120hp 733kg 54 Blades
ERGON120-255 260cm Working width 85-120hp 770kg 60 Blades
ERGON120-280 285cm Working width 90-120hp 800kg 66 Blades
ERGON120-305 310cm Working width 100-120hp 880kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.1M (75-120HP) ERGON ROTARY HOE

The stump jump chisel plough is an ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard.
Features:
11 Tines at 12 adjustable spacings.
Heavy Duty 75x75x6mm Frame.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Horsepower requirement is approximately 8-10 HP per tine.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
Depth Wheels (Pair Holden)
10x8mm Dart Point
16x8mm Sweep
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 11'9" (3.5M) WIDTH - 0198

Find Farm Machinery For Sale. Browse 7585 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

POLYMASTER 250L SWEEP TROUGH (25MM VALVE)

SILVAN 1/2" O-RING (O.D)

BURDER 600KG, 2M LIFT HEIGHT FORKLIFT

ROTECH RURAL DRIVABLE ROUND STEEL POST 80NB X 2100MM- RSP804.0

JOHN BERENDS CYCLOMATIC 2100 (7') CENTRE LINE MULCHER - 0150,56-84HP

RATA 1.5M SILAGE GRAB

MURRAY HYDRAULIC BALE GRAB- 15 BALE, 3PL- SERIES 56

JOHN BERENDS 2.8M S-TINE (28 TINES) STANDARD CULTIVATOR - MIN 56HP

SHOOF CALVING ROPE 7MM SINGLE EYE - PAIR

CELLI 2.1M (75-120HP) ERGON ROTARY HOE

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 11'9" (3.5M) WIDTH - 0198

Farm Supplies Machinery & Equipment

Dealer Address