Farm Supplies Machinery & Equipment

A light duty dual mount slasher for grass and light work. Ideal for compact tractors. Front and rear stone guarding as standard.
Features:
Body designed with 3mm top plate and strong 6mm thick adjustable skids.
Italian made Bondioli & Pavesi Series 2 pto driveshaft with shearbolt protection rated at 900NM. Optional 2 plate slip clutch with Series 4 shaft. (The clutch is standard on the TA135 and TA150 models).
Cat 1 linkage with both offset and centre mount positions.
Hardened and tempered stepped/bushed slasher blades.
Standard with full length hinging rear steel stone flap and front rubber guard.
Adjustable skids have cutting height range of 25 100mm.
40 HP oil lubricated gearbox.
Floating headstock.
Document holder fitted.
Full 12 month warranty on design and manufacture.
Specifications:
Cutting Width 1360mm
Overall Width 1460mm
Overall Length 1470mm
Tractor HP 25-45
Cutting Height 25-100mm
Weight 225kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TA135 LIGHT DUTY SLASHERS 1.35M - 0349, 40HP

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

Note: This model does not include a crumbler, however, it is available as an option. The second & third picture of this listing shows the cultivator with a crumbler.
Features:
Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 20
Tine Size: 45mm x 12mm
Frame Size: 50mm x 50mm RHS
Tractor HP Guide: 3HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Solid Rubber Depth Wheels
HD Tine helpers
3m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3M S-TINE (20 TINES) HEAVY DUTY CULTIVATOR - MIN 60HP

Male/Tractor Side (Only).
The smart hitch is designed to maximise safety and productivity. The female hitch is welded onto implements like the counterweight and it can be quickly attached to the rear of the tractor without the need for the operator to dismount from the tractor.
All it takes is to reverse the tractor and when the male and female hitch mates, it will click into position and lock itself to the implement. The implement can be easily detached with a single pull of the latch.
Specifications:
Rating approx: 4,000kg
Category: Cat 3 American Style (male/tractor side only)
Options:
- Hydraulic Top Link to suit including hoses
- Burder 3 point linkage Quick Tow Hitch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 4,000KG CAT 3 AMERICAN STYLE SMART HITCH (MALE SIDE ONLY)

The Rubber Series range of Climaxx Ramps are built for use with pneumatic [air filled] tyres, and Multi-Terrain Loader rubber tracks. The unique tread surface of this range has been designed to obtain the highest possible strength and the lightest possible weight, together with a smooth, safe ride.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Government Departments or any application where wheeled, and rubber tracked machinery must be transported safely and effectively.
Featuring the next lowest Ramp weights after the ATV Series & Mower Series whilst maintaining Surewelds full level of quality, select from this range where Ramp weights are critical and machinery with pneumatic tyres or rubber tracks is to be loaded.
Where steel tracks are to be used on Ramps, please refer to the T Series which have a different tread surface to the Rubber Series. Please see the table below, for SureWelds full range of Rubber Series Ramps.
Specifications:
Rated Capacity: 1,500kg
Ramp Mass: 16kg
Ramp Length: 2.4m
Track Width (internal): 300mm
Ramp Width: 390mm
Ramp Depth: 90mm
Features:
Tread Surface of Rubber Series Ramps.
Steel Pin Connection.
Foot adaptable to varying gradients.
Models:
6/1524R - 1,500kg Rated Capacity, 16kg Ramp Mass, 2.4m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/1533R - 1,500kg Rated Capacity, 22kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/1929R - 1,900kg Rated Capacity, 18kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/3016R - 3,000kg Rated Capacity, 12kg Ramp Mass, 1.6m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/3029R - 3,000kg Rated Capacity, 24kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3033R - 3,000kg Rated Capacity, 27kg Ramp Mass, 3.3m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3635R - 3,600kg Rated Capacity, 33kg Ramp Mass, 3.5m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 120mm Ramp Depth
7/4040R - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536R - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833R - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2.4M, 1,500KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

Extra heavy duty hydraulic side-shift mulcher, for tractors from 80-140 hp. Suitable for mowing grass and mulching prunings and wood up to 150mm in diameter.
Features:
- 140 hp rated gearbox
- 2400 RPM rotor speed
- 30cm high intake
- Integrated over-run clutch
- High clearance intake (30cm)
- Hydraulic side shift (60cm)
- Fixed upper and rear counter blades
- Double skinned chassis
- 220mm diameter adjustable rear roller for cutting height
- Side skids
- 5 belt side transmission with automatic belt tensioner
- 540 rpm PTO
- Front protection chains
- Flat hammer flails (1.4kg)
- 20mm flail bolt
- 8 + 8mm chassis
Overall Width = 2,680 mm
Cutting Width - 2,400 mm
Hammers = 20
HP Required = 90 - 120hp
Weight = 1,040 kg
Options Available:
Y Flails, in Lieu of Hammer Blades
Self Steering Rear Wheels, in Lieu of rear roller
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.4M (90-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

Multi purpose side shift mulcher, for tractors from 50-70hp.
Ideal for mowing grass, set-aside and medium size pruning's up to 50mm diameter.
Specifications:
Actual Width: 193cm
Working Width: 175cm
Required HP: 50-70hp
Weight: 510kg
No of Blades: 16
Features:
70hp Rated gearbox
Integrated over-run clutch
Fixed counter blades
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
Side shift by threaded bar (Hydraulic kit available see options)
540rpm PTO
Front protection flaps
Flat hammer flails
Options In Lieu of Standard:
Hydraulic ram kit for off set (in lieu of threaded bar)
Rear collection spikes (each) (125 = 9, 150 = 11, 175 = 13, 200 = 15)
Set of steering wheels in lieu of roller
Y flails in lieu of hammer flails
Models
VEGA/S125 125cm Working Width 40-70hp 440kg 12 Blades
VEGA/S150 150cm Working Width 45-70hp 450kg 14 Blades
VEGA/S175 175cm Working Width 50-70hp 500kg 16 Blades
VEGA/S200 200cm Working Width 60-70hp 560kg 18 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (70HP GEARBOX) VEGA/S MULTI PURPOSE MULCHER

Jarrett Redback Series Slasher 1.8m - 100hp
- Hi-speed gearbox, centre/offset.
- 5mm body and 6mm front and rear apron.
- 6mm x 200 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 1950
Cutting width (mm) - 1800
Total weight (kg) -520
Gearbox hp/(kw)- 100/(75)
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 19,600(100)
Options:
- Solid Rubber Twin Wheel Kit (75hp gbox)
- Super Series Solid Rubber Single Wheel Kit (75-150hp)
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 100HP - RB6-100

The carryall really does do what it says it carries all!
Farm Aid carryalls are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction, they are built to serve and built to last.
FA503: 4 x 3 with Dressed Hardwood Floor (85kg)
Options:
Collapsible headstock option available enquire today.
Our carryalls are also available in other configurations and can be made to specification.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARM-AID 4FT CARRYALL WITH HARDWOOD FLOOR - 4FT X 3FT - FA503

Standard Bucket 8000 series - 1.80m
The standard or general purpose (GP) bucket is suitable for routine operations such as earth moving and scooping. The standard bucket is fitted with the following to ensure that the bucket stays durable under intense conditions:
Features:
- Stiffening rib
- Wear plates
- Reinforced ends
- Optional teeth upgrade to enhance loading or material handling applications.
Specifications:
- Width (m): 1.80m
- HP Range: 50-100
- Struck Capacity (m3): 0.49
- Rated Capacity (m3): 0.58
- Dimensions LxWxH (mm):
- Weight (kg): 225
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER BUCKET STANDARD 8000 SERIES 1.8M - 50-100 HP RANGE

RZ Range RLC Leaf Spring Rippers 3m R9-3
Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available. This is the Fixed Frame version.
Specifications
Working Width: 300cm
Required HP: 125-200hp
Rippers: 9
Fixed Frame.
Features
Double clamp bolt-on legs.
Adjustable leaf spring.
Heavy duty 100x100mm box section.
Adjustable rubber depth wheels.
865kg breakout.
Reversible chisel point.
Solid steel legs.
Options
Rear rollers.
Rubber depth wheels (2×600-9)
Wing share.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

Large Profile Buckets (high volume/light materials).
Specifications:
- Width (m): 2.10m
- HP Range:100-150
- Struck Capacity (m3): 1.28
- Rated Capacity (m3): 1.49
- Dimensions LxWxH (mm): 2150x1212x921
- Weight (kg): 445
Options:
- Forged or Profile Top Grab.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER LARGE PROFILE BUCKET (9800 SERIES) 2.1M - (100-150 HP)

Find Farm Machinery For Sale. Browse 7578 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TA135 LIGHT DUTY SLASHERS 1.35M - 0349, 40HP

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

JOHN BERENDS 3M S-TINE (20 TINES) HEAVY DUTY CULTIVATOR - MIN 60HP

BURDER 4,000KG CAT 3 AMERICAN STYLE SMART HITCH (MALE SIDE ONLY)

SUREWELD 2.4M, 1,500KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

CELLI 2.4M (90-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

CELLI 1.75M (70HP GEARBOX) VEGA/S MULTI PURPOSE MULCHER

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 100HP - RB6-100

FARM-AID 4FT CARRYALL WITH HARDWOOD FLOOR - 4FT X 3FT - FA503

BURDER BUCKET STANDARD 8000 SERIES 1.8M - 50-100 HP RANGE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

BURDER LARGE PROFILE BUCKET (9800 SERIES) 2.1M - (100-150 HP)

Farm Supplies Machinery & Equipment

Dealer Address