Farm Supplies Machinery & Equipment

This handy unit comes with a 160 amp arc welder, 6.8 kVA generator, 14 cfm air compressor, and a 12V battery charger. That's 4 essential tools in just one machine.
Ideal for farm maintenance, machinery breakdown repairs, on the building site, and even as standby household or cold room power.
Specifications:
Rated Output: 5440 Watts
Engine Model: Yanmar L100N5
Phase: Single
Starting System: Recoil/Electric
Noise Level @ 7m: 80 dBA
Outlets: 2 x 15 Amp plugs
Welder: 160 Amp (AC)
Duty Cycle: 60%
Compressor: 14 CFM
Air Tank Capacity: 50 L
Battery Charger: 10 Amp
Operation Hours @ 80% Load: 3.3 hrs
Fuel Type: Diesel
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 6.8 KVA WORKSTATION DIESEL GENERATOR (ELECTRIC START)

The Flex Wing Topper is a three point linkage mounted machine which folds up to 2.3m (7ft 6in) transport width.
Like all MAJOR machines, the Flex Wing Topper is of robust construction. CE conformity is achieved through full PTO guarding and heavy rubber skirting to prevent debris from escaping.
The wing cutting decks are raised by hydraulic control to transport position. The wings are capable of flexing from -15 to +25 degrees allowing the cutting unit to follow the ground contours.
Contra-rotating swinging blades are retained in hardened steel bushings and clamped by sprung steel blade backs.
Under-sole discs are fitted to prevent scalping and ensure a perfect finish every time.
Features:
Robust pivot points
Rubber shock absorbers
Slip clutch PTO protection
Hydraulic wing lift
ProCut swinging blades
88mm (3 1/2in) blade overlap to eliminate striping.
Model:
MJ38-540 5.4m (18ft) 1,395 kg 60-160HP 6 Rotors 50-250mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

Rotavator Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROTAVATOR BLADE SQUARE (LH) 80 X 8MM

Knife Section.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX KNIFE SECTION - OVER SERRATED (83 X 76 X 2.75MM) REPLACEMENT FOR JOHN DEERE

Good quality moulded and stitched brown leather pouches for pocket knives.
Belt loop and brass dome.
Dimension is maximum suitable closed-knife length.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF 7.5CM KNIFE POUCH MOULDED

300MM 4 Series auger (Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 300MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Pallet Fork 2 Tonne, with sliding tines.
The Daken Pallet Fork is designed to fit Euro hitch tractor front end loaders. It features sliding tines that can be locked onto the carriage bar like a regular fork lift.
Features:
- Class 2 Rated tines
- Tines can be locked into position
- Fits standard Euro hitch FEL
- Lockable sliding tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN PALLET FORK 2 TONNE WITH SLIDING TINES - 61014DK

SPAREX ROTAVATOR BLADE SQUARE (LH) 80 X 9MM

Obstetric Lube Pressure Pump- 5 litre.
Designed for controlled and direct delivery of obstetric lubricant, the lube pump ensures minimal waste and mess.
Bottle is pumped prior to use and pump will deliver about 1 litre per minute through 2m long, 12mm-id plastic hose.
Delivery is controlled via the valve on the tube.
Will pump most types of lubricant.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF OBSTETRIC LUBE PRESSURE PUMP - 5LITRE

Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
Features on our Mulchers make the full range stand out from the opposition.
The AMM series is a medium duty mulcher suitable for pastures and crops. Residues are finely chopped and the swath evenly spread over the ground providing a mulch to improve soil moisture retention and seed germination.
Features:
- 155cm cutting width
- European gearbox (30HP)
- Clevis hitch cat 1 three point linkage.
- Chain top link.
- 4mm Body panel to withstand obstacle impact.
- Blades pivoting on hardened bushes and grade 8 bolts.
- Adjustable height skids.
- Built-in mulching bar.
- 6 series European driveshaft comes with integral clutch
Optional extras:
- Friction clutch
- Height roller
- Twin height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AMM SERIES 155CM (30HP) - AMM/155

MJ30-420 Double Wing Mulching Slasher with rear wheels ideal for macadamias (100-150hp)
The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
4.2 metre working width
3PL
6 rotors
weight 1265kg
100-150HP
Ideal Macadamias, also stubble, pasture, solar farms
Twin wing - folding
Rear wheels in lieu of rollers
Mulch and slash
Model:MJ30-420DWW
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 4.2M MJ30 DOUBLE WING MULCHING SLASHER INC REAR WHEELS 100-150HP

Hydraulic Cylinder Repair Kit.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC CYLINDER REPAIR KIT - 63 / 35MM

Find Farm Machinery For Sale. Browse 7665 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

GENTECH 6.8 KVA WORKSTATION DIESEL GENERATOR (ELECTRIC START)

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

SPAREX ROTAVATOR BLADE SQUARE (LH) 80 X 8MM

SPAREX KNIFE SECTION - OVER SERRATED (83 X 76 X 2.75MM) REPLACEMENT FOR JOHN DEERE

SHOOF 7.5CM KNIFE POUCH MOULDED

DIGGA 300MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

DAKEN PALLET FORK 2 TONNE WITH SLIDING TINES - 61014DK

SPAREX ROTAVATOR BLADE SQUARE (LH) 80 X 9MM

SHOOF OBSTETRIC LUBE PRESSURE PUMP - 5LITRE

AGRIFARM MULCHER AMM SERIES 155CM (30HP) - AMM/155

MAJOR 4.2M MJ30 DOUBLE WING MULCHING SLASHER INC REAR WHEELS 100-150HP

SPAREX HYDRAULIC CYLINDER REPAIR KIT - 63 / 35MM

Farm Supplies Machinery & Equipment

Dealer Address