Farm Supplies Machinery & Equipment

Fault finding made easy, saving you time and money!
Read fence voltage, fence current and the direction of a fault.
Now with added safety with no cords, waterproofing and a belt clip.
The Daken Power Probe takes the guess work out of fault finding on your electric fence.
Features:
- Tests voltage up to 9.9kv
- Reads Fault Direction
- Reads strength of load
- Large LCD display
- Well insulated
- Water resistant
- Economical
- Takes a 9volt battery
- Standard 12 month warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

DAKEN DIGITAL POWER PROBE 2 ELECTRIC FENCE TESTER - 73040D

Medium duty power harrow for tractors up to 110 / 130hp.
Suitable for small agricultural applications.
Specifications:
Actual Width: 305cm
Working Width: 300cm
Required HP: 85-110hp
Weight: Cage roller - 860kg, Packer roller - 980kg
No of Blades: 24
Features:
Rated up to 110hp
324 rotor speed
540 rpm
Category two linkage
Manual depth control
Rear levelling bar with winder control and indicator
285 x 90 x 12mm tines
285mm working depth
45 degree sliding side plates
Shearbolt safety on driveshaft
Greasable top bearings
Specifications:
Actual Width: 255cm
Working Width: 250cm
Required HP: 80-110hp
Weight: Cage roller - 770kg, Packer roller - 880kg
No of Blades: 20
Features:
Rated up to 110hp
324 rotor speed
540 rpm
Category two linkage
Manual depth control
Rear levelling bar with winder control and indicator
285 x 90 x 12mm tines
285mm working depth
45 degree sliding side plates
Shearbolt safety on driveshaft
Greasable top bearings
Accessories:
Hydraulic kit for roller adjustment
Four speed gearbox (540 / 1000 rpm) - rated to 130hp
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
RANGER250 250cm Working Width 80-110HP 20 Tines
RANGER300 300cm Working Width 85-110HP 24 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3M (85-110 HP) RANGER POWER HARROW

The compact design of this chipper makes it a versatile choice, suitable for the hire industry or arboriculture contractors alike. Simple and safe controls makes it easy to operate for all, while its powerful performance exceeds the expectations of the most demanding user.
An industry leading massive 7 x 13 wide infeed with single feed roller provides unbeatable feeding power. The C25 features a directly activated hydraulic variable speed feed roller and electronic control system, the adjustable auto feed system reverses the feed rollers to optimise engine recovery speed, therefore maximising output.
Engineered in New Zealand to last a lifetime, delivering on the tough expectations of the Australasian market. Made of steel and finished with a durable powder coated finish with zinc shield rust protection delivers longevity. Powered by the reliable Honda GX690 V-twin petrol engine and Parker hydraulics quality components to match Hansas superior standard.
The compact and lightweight design allows the chipper to be moved around unhitched with ease by one person. With a weight from 780kg, this chipper can be towed by any vehicle. Unbeatable weight to capacity & power ratio, well balanced with low centre of gravity.
Everything is accessible for routine servicing and maintenance by removing two bolts on the housing. The double sided knives and easily adjustable anvil makes for simple maintenance. If advice is required our specialist service team is here to help you get the best from your Hansa.
Specifications
Max Capacity - 160mm (6")
Engine Type - Honda GX690
Max Power - 25HP
Fuel Type - Petrol
Fuel Tank Size - 33L
Hydraulic Tank Size - 23L
Start Type - Electric
Inlet Chute Size - 330 x 178 mm
Knife Quantity - 2 (reversible)
Knife Size - 200 x 116 x 16 mm
Knife Material - A8 Modified Tool Steel
Cutting Disk Dimensions - 650 x 20mm
Cutting Disk Weight - 81kg
Cutting Disk Speed - 1,800 RPM
Belt Drive - 3x B Section
Hydraulic feed size - 220mm roller
Wheels - 13" rim (low profile)
Dimensions (l x w x h) 3,270 x 1,580 x 2,165 mm
Weight (depends on options) 780 - 885 kg
Outlet Chute Height - 2,165 mm
Outlet Chute Type - 360 Swivel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HANSA C25 WOOD CHIPPER (25HP - 160MM CAPACITY)

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 6MM DISCS - 0841, SUIT 60-130HP

The Rollmaxx SW2000C, SW2000, SW2400EC and SW2400E models are designed for transportation of Mini Excavators. These compact Trailers maintain impressively low tare weights, yet are still wide enough to accommodate most excavators with operating weights up to 2,000kg.
The SW2000C and SW2000 Trailer give operators the advantage of towing equipment up to 1,900kg in weight, without the legal requirement for an electric brake system. These have a special application in the Hire Industry.
The SW2400EC and SW2400E Trailer, with its Electric Brakes and Break-away System, give even greater versatility, making it possible to carry up to 2,065kg with an Aggregate Trailer Mass [A.T.M] of only 2,400kg.
The SW3500ER, which is also included with Mini Loader Trailers, allows 2,850kg of equipment to be towed with an Aggregate Trailer Mass [A.T.M] of just 3,500kg.
The SW4100ER, which is also included with Mini Loader Trailers, allows 3,450kg of equipment to be towed with an [A.T.M] of just 4,100kg.
Specifications:
Aggregate Trailer Mass: 2,200kg
Allowable Payload: 1,860kg
Tare Weight: 340kg
Deck Width: 1,310mm
Deck Length: 1,900mm
Bucket Rest Length: 1,400mm
Total Trailer Length: 4,700mm
Features:
Aluminium Deck Construction
Top Quality Components including LED Lights
Hinged Aluminium Ramps
Robust Steel Mudguards, double coated in a Choice of Colours
HDPE Buffers on Bucket Rest area.
Options:
JCH2435 - Lockable Jerry Can Holder
LRK2435 - Load Restraint Kit
TC70 - Tow Coupling 70mm (non-standard)
TB70 - Tow Ball 70mm (non-standard)
WTU14 - Upgrade to 14" Alloy Wheels
WTU16 - Upgrade to 16" Alloy Wheels
WTS13 - Wheel & Tyre, Spare, 13" Steel (Supply only)
WTS14 - Wheel & Tyre, Spare, 14" Steel (Supply only)
WTS15 - Wheel & Tyre, Spare, 15" Steel (Supply only)
WTS16 - Wheel & Tyre, Spare, 16" Steel (Supply only)
WTA14 - Wheel & Tyre, Spare, 14" Alloy (Supply only)
WTA16 - Wheel & Tyre, Spare, 16" Alloy (Supply only)
WM1416 - Spare Wheel Mount
AM2435 - Auger Stands
RPU2435 - Roller Package Upgrade
Models:
SW2000C - 2,200kg Aggregate Trailer Mass, 1,900kg Allowable Payload, 280kg Tare Weight, 1,100mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW2000 - 2,200kg Aggregate Trailer Mass, 1,860kg Allowable Payload, 340kg Tare Weight, 1,310mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW2400EC - 2,400kg Aggregate Trailer Mass, 2,060kg Allowable Payload, 340kg Tare Weight, 1,100mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW2400E - 2,400kg Aggregate Trailer Mass, 2,020kg Allowable Payload, 380kg Tare Weight, 1,310mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW3500ER - 3,500kg Aggregate Trailer Mass, 2,850kg Allowable Payload, 620kg Tare Weight, 1,800mm Deck Width, 2,600mm Deck Length, 1,100mm Bucket Rest Length, 5,200mm Total Trailer Length.
SW4100ER - 4,100kg Aggregate Trailer Mass, 3,450kg Allowable Payload, 620kg Tare Weight, 1,800mm Deck Width, 2,600mm Deck Length, 1,100mm Bucket Rest Length, 5,200mm Total Trailer Length.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 1,860KG PAYLOAD MINI EXCAVATOR TRAILER WITH 2,200KG A.T.M AND 340KG TARE

Features:
100HP two speed gearbox (540 RPM).
Phased rotors 200mm pitch.
Head stock centre mounted.
Leveling bar standard.
Floating side shields.
2060mm working width.
80 270mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF100-200CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 60-100 HP
No. of Blades: 20
Working Width (mm): 2060
Product Weight (kg): 700
Total Width (mm): 2150
MF100-200PR Specifications (with Packer Roller):
Connection Type: Linkage
Min PTO HP: 60-100 HP
No. of Blades: 20
Working Width (mm): 2060
Product Weight (kg): 780
Total Width (mm): 2150
Factory Options:
Stone Collar Protection
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI MEKFARMER 100 POWER HARROWS 2.06M - BREVIGLIERI - MF100-200CR, MIN 60-100 HP

The T Series range of Climaxx Ramps are built for use with Steel Tracks [including steel tracks with Rubber Pads], and Rubber Tracks. The tread surfaces in this range are robust and are configured to resist damage from tracks.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Electrical & Plumbing Contractors, Demolition Companies, Government Departments or any application where tracked machinery must be transported safely and effectively.
Featuring the greatest versatility of the Climaxx range, these models can be used with tyres as well as with tracks. Select from this range where machinery with Tracks as well as machinery with pneumatic tyres are to be loaded.
In situations where Tracks are not used on Ramps, the Climaxx Rubber Series provide a more lightweight and economical option over these T Series Ramps. Smoother ride is also a distinctive feature of the Rubber Series. Please see the table below, for the full range of Climaxx T Series Ramps.
Specifications:
Rated Capacity: 7,500kg
Ramp Mass: 57kg
Ramp Length: 3.6m
Track Width (internal): 500mm
Ramp Width: 600mm
Ramp Depth: 184mm
Features:
Tread Surface of T Series Ramps.
Foot matching Ramp gradient.
Foot adaptable to varying gradients.
Models:
7/3033T - 3,000kg Rated Capacity, 33kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 110mm Ramp Depth
7/3635T - 3,600kg Rated Capacity, 38kg Ramp Mass, 3.5m Ramp Length, 400mm Track Width (internal), 500mm Ramp Width, 120mm Ramp Depth
7/4040T - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536T - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536TW - 4,500kg Rated Capacity, 44kg Ramp Mass, 3.6m Ramp Length, 450mm Track Width (internal), 560mm Ramp Width, 125mm Ramp Depth
7/4833T - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833TW - 4,800kg Rated Capacity, 41kg Ramp Mass, 3.3m Ramp Length, 450mm Track Width (internal), 560mm Ramp Width, 125mm Ramp Depth
7/6036T - 6,000kg Rated Capacity, 53kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
7/7546T - 7,500kg Rated Capacity, 57kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 184mm Ramp Depth
7/9037T - 9,000kg Rated Capacity, 74kg Ramp Mass, 3.7m Ramp Length, 500mm Track Width (internal), 640mm Ramp Width, 200mm Ramp Depth
7/11537T - 11,500kg Rated Capacity, 88kg Ramp Mass, 3.7m Ramp Length, 500mm Track Width (internal), 660mm Ramp Width, 180mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.6M, 7,500KG CAPACITY (60CM WIDTH) CLIMAXX T SERIES LOADING RAMP

The Hand Powered Wire Winder is a compact light weight solution to winding up an old fence wire or temporary electric fencing wire. The Winder can be used to wind up plain wire or barbed wire and the finished coil is easily removed on completion.
This is a great piece of kit for those small jobs or space where terrain imposes limits on access by larger machinery. The winder can be used to pull up single wires or several wrapped together. The outside frame detaches easily for removal of the coils, and cut-outs in the frame enable you to tie off the roll neatly.
Everything you need to retrieve your old fencing wire is included right here in this kit.
- Blue Hand Powered Wire Winder and universal X-Mount bracket
- Towbar Mount with adjustable height and hitch clamp
- Wire Guide
Re-use of plain fencing wire is possible as the internal diameter of the recovered rolls are a nominal 600mm, which is compatible with most wire spinners. Recovered barbed wire will need to be dispensed by hand.
Barbed wire capacity: 400m Iowa, 500m high tensile. Distance you can comfortably roll in one section: 50-100 metres.
Plain wire capacity: 1500-2000 metres 2.5 high tensile, 600-800m 4.0mm 'Number 8'. Distance you can comfortably roll in one section: 100-200 metres however we have rolled 600 metres ourselves. General rule of thumb - if you can pull the wire by hand you can wind it comfortably.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

WALTERS FENCING HAND POWERED WIRE WINDER

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
7 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 7'9" (2.3M) - 0183

Teat Intake Elbow Milkflow w Valve - 10 pack.
The Milkflow teat intake elbow is used to enable a gravity teat to empty all the milk from the bottom of a feeding container.
The elbow fits neatly and firmly into the back of the Big Softy teat.
The internal dimension will take the tube-end of an Excal Stop Valve to further enhance its versatility.
Dimensions are od = 10.25mm, id = 7.35mm, length = 45mm. Enabling suction to a depth of 35mm from the centre of the teat.
Sold in 10-packs only.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF TEAT INTAKE ELBOW MILKFLOW W VALVE - 10 PACK

Nose roller complete with bearing & circlip wear part to suit XHD trencher range.
Auger Torque provide a range of wear parts to ensure your trencher is always performing at its optimum efficiency.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE NOSE ROLLER COMPLETE WITH BEARING & CIRCLIP TO SUIT XHD TRENCHER RANGE

Linkage 600L Pasturepak sprayer with 58 L/min pump, reel, hose & gun and 8m Field boom. Ideal for pasture spraying.
Specifications:
Market: Dairy & Livestock
Tank Size (L): 600
Connection Type: Linkage
Pump Size (L/min): 58
Height / Width / Length (mm): 1300 / 2067 / 1350
Product Weight (kg): 180
Application: Pasture spraying.
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with raised pump mount. BP60/20: 58 L/min. capacity 2000kPa pressure. BP75/20: 71 L/min. capacity 2000kPa pressure.
Boom: Field boom with stainless steel spray lines, non-drip nozzle holders, fully galvanised frame, nozzle protection and spring loaded safety break back/forward.
Nozzles: Air induction nozzles with strainer in bayonet fit non-drip nozzle holders at 50cm spacings.
Controls: 3 outlet manual control valve with pressure regulator. Mounted forward for easy access.
Tank: Low profile, 400/600/800L polytuff impact resistant polyethylene construction, external sightline with floating ball and non-spill offset screw-down lid with single breather. 15L fresh water tank with screw down lid and on/off tap. 4L toolbox with polyethylene lid.
Frame: Fully galvanised steel, cat I & II linkage on 400L, cat II linkage on 600L and 800L.
Agitation: Bypass agitation.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer, suction line strainer and nozzle strainers.
Hose Reel: Fitted with rear-mounted Eco hosereel, 30m of 10mm hose and Spotjet spraygun with adjustable spray nozzle.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
Options:
- 14L foam marker (single side)
- 16L foam marker (double side)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 600L (8M BOOM) PASTUREPAK LINKAGE SPRAYER

Find Farm Machinery For Sale. Browse 7626 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

DAKEN DIGITAL POWER PROBE 2 ELECTRIC FENCE TESTER - 73040D

CELLI 3M (85-110 HP) RANGER POWER HARROW

HANSA C25 WOOD CHIPPER (25HP - 160MM CAPACITY)

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 6MM DISCS - 0841, SUIT 60-130HP

SUREWELD 1,860KG PAYLOAD MINI EXCAVATOR TRAILER WITH 2,200KG A.T.M AND 340KG TARE

BREVIGLIERI MEKFARMER 100 POWER HARROWS 2.06M - BREVIGLIERI - MF100-200CR, MIN 60-100 HP

SUREWELD 3.6M, 7,500KG CAPACITY (60CM WIDTH) CLIMAXX T SERIES LOADING RAMP

WALTERS FENCING HAND POWERED WIRE WINDER

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 7'9" (2.3M) - 0183

SHOOF TEAT INTAKE ELBOW MILKFLOW W VALVE - 10 PACK

AUGER TORQUE NOSE ROLLER COMPLETE WITH BEARING & CIRCLIP TO SUIT XHD TRENCHER RANGE

SILVAN 600L (8M BOOM) PASTUREPAK LINKAGE SPRAYER

Farm Supplies Machinery & Equipment

Dealer Address