Farm Supplies Machinery & Equipment

Lower Link Restrainer Spring.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOWER LINK RESTRAINER SPRING

When a single row of gangs isnt enough to get the results you are hoping for, then its time to call on the literal earth-shattering power of Farmtechss Maxi series!
The Maxi series offers maximum aeration capability with its additional row of gangs that effectively doubles the effect especially in areas of cultivation by increasing the shattering effect of the soil.
The Maxi series boasts a standard lineup of 4 rigid frame models with working widths that range from between 3-meters to 5-meters. Each requires a tractor with a power output thats somewhere between 120-200 HP depending on the effective width of the model. Center Folding trailing models are also available
To achieve the best results, we highly recommend combining the Maxi series with an electric seeder and a spring tine harrow to create a true one-pass renovator so you can simultaneously perforate the soil as well as apply seeds on your paddock.
Specifications:
Size: 2400mm
Cultivation Width: 2300mm
No. Tines Per Rotor: 4
Rotors Per Gang: 6
No. Gangs: 4
Mounting: Linkage
Approx Weight: 1790kg
Min HP Req: 90
Standard Features:
- Hot dipped galv finish
- Two rows of gangs
- Tines are spaced at 95mm
- Large rotor bearings
- Multi-gang system
- Aeration and cultivation settings
- Gang angle adjustable from 0-10 degrees. (At 10 degrees the aervator will aggressively cultivate.
- Gang adjusting spanner supplied
- Rear tow hitch
- Cat 1-2 pick up
- Built-in weight trays
Available Configurations:
- 3PL or trailing
- Fixed or Folding frame
- 2.4 to 5-meter working width
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 2.4M - GH-2404 MAXI. MIN 90+ HP (3PL)

Belt specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX AGRIBELT V BELT - C SECTION - BELT NO. C164

Top Link Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK PIN (CAT 0) (16MM PIN DIA, 98MM WORKING LENGTH)

Lower Link Ball (Cat. 3/3).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOWER LINK BALL (CAT 3/3) (ID: 1 7/16'', OD: 2 17/32'', WIDTH: 1 3/4'')

Post Hole Digger - 3 point linkage, 50hp gearbox with 2.2m boom- 50.8 mm round shaft.
* Auger not included.

Diggas 3 Point Linkage is ideal for those who need the post hole boring application without the power of the Ramdrill.
3pt linkage rear mounted post hole diggers for tractors are available in 25hp, 50hp and 75hp. They are ideal for trees, fences, posts, etc.
Digga manufactures a range of 3pt linkage PTO shaft driven, rear mounted hole post diggers (ram drills) and PHD hydraulic tractor borers for drilling holes. They are easy to mount and store and offer class leading performance.
Features:
- 3 models with 25HP, 50HP, and 75HP
PTO driven motors.
- Ideal for tractors with a single auxiliary ports.
- Heavy duty fully adjustable frame
- Adjustable stabiliser legs for ease of fitment and storing
- Australian Made Quality
- Heavy duty, yet economical
Specifications:
- 50hp
- 2.2m boom
- Length (overall) 2318mm
- Height (overall) 897mm
- Width (overall) 671mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA POST HOLE DIGGER - 3 PT LINKAGE 2.2M BOOM (50HP) -TP-000033

The direct drive auger motor is fast and has about 400NM of torque. Operates with its own ram, allowing optimal down pressure and lift. (Not able to extract old posts). 

This auger motor can also be mounted to the RSE by using the RSE adaptor. Great operation to consider if you are battling in hard or dense clays. Able to drill up to 1200mm deep (can drill deeper on request).


All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FENCE-PRO STANDARD AUGER MOTOR - 75MM / 3 INCH AUGER (EARTH OR TUGSTEN PILOT)

Gentech WS200-14-10HSR, 7 kVA portable workstation generator powered by Honda petrol engine. Featuring 6.5 litre fuel tank, giving 2.5 hours of operation at 80% load.
FEATURES:
- 240V Workstation
- 7kVA Generator
- 14 CMF Compressor
- 200 Amps @ 60% Welder
- 160 Amps AC Welding
- 10 Amps DC Battery Charging
- 50L Air Tank Capacity
Specifications:
Honda GX390 engine
Fuel tank: 6.5L
Approx run time: 2.5hrs @ 80%
Noise level: 69 dBA @ 7m
Dimensions: 900x870x680mm (LxWxH)
Weight: 105kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA WORKSTATION PETROL GENERATOR

Hydraulic Top Link (Cat.3/2) Knuckle and Q.R CBM Hook
Cylinder Bore: 63mm
Min. Length : 670mm.
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC TOP LINK (CAT 3/2) (63MM CYLINDER BORE) (670MM MIN LENGTH)

600mm TP series Tree Planting Auger (soft earth) up to 5T for Ramdrill PTO- Hydraulic downforce.
Price inclusions: 50.8mm HUB Tree Auger, teeth, pin and clip.
TP - Tree planter
Designed to drill a smaller diameter hole for the tap root and a larger secondary hole at the top for the root ball. The design of the Tree Planter cutting system will leave the hole walls rough and not glazed, meaning the plant stock has the maximum chance of establishing.
The angle and geometry of the teeth to the pilot
is the key to the efficiency in which these augers
perform. Available for drilling in earth (TS tooth
style), providing longer wear life and greater
cutting performance. Not suited for rock.
Features:
- Designed to easily dig and place trees and shrubs of all sizes
- Cutting system designed to prevent root binding
- Improves plant establishment
- Adaptors & extensions to maximise drilling depth
- Robust Auger body construction for long life
- Heavy duty tu7be with highest grade steel
- Replaceable wear parts
- Quality Australian made
Specifications:
- Drilling Conditions: soft earth
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 6 mm
- Flights (Carry): 6 mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: PDD-PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay:45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N/A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 600MM TREE PLANTING AUGER FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

This will help to prevent algae growing in your water.
Features:
- Made in Australia of superior materials
- Covers with moulded knock-outs which can be removed as required
- Flexible and UV stabilised to withstand the elements
- UV Blocker lid prevents algae growth by stopping sunlight.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS STRAINER DUST COVER FOR RTS005

(4) Row Stanhay X30 Seed Drill inc Camera & Monitor for small seed.
A multiline row seeder capable of seeding 3 lines of seed from each row.
The industry leading Stanhay small seed vacuum metering unit has been continually developed and improved over the last 30 years to give unmatched versatility and performance in the field.
The X Series metering unit features further advancements to improve performance.
Newly developed Stainless Steel seed discs offer improved life and corrosion resistance while maintaining the benefits of thin disc technology. Thin discs can flex to maintain a perfect seal within the metering unit while the flow dynamics of air through a thin aperture in the seed disc offer optimum pickup performance of small seeds.
This effect also improves consistency of seed drop and reduces chance of blockages. The discs can also be run on either side which can further improve the lifetime of the disc, a feature unique to thin disc technology.
2.50m rigid toolbar
17 rib fan 540 rpm
1 x support landwheel
1 x drive landwheel
1 x parking stand
Vacuum emptier
4 (or 3) X30 row units include...
2L hoppers
Stainless steel Front and rear unit wheels
100mm x 2 line hyline ski plastic coulters
2 line x 100mm ZP press wheels
Double arm coverers
1 x set of seed discs
Drive shaft
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

STANHAY (4) ROW X-30 SEED DRILL INC CAMERA & MONITOR - PRECISION SMALL SEED

Find Farm Machinery For Sale. Browse 7570 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SPAREX LOWER LINK RESTRAINER SPRING

AERVATOR GH SERIES 2.4M - GH-2404 MAXI. MIN 90+ HP (3PL)

SPAREX AGRIBELT V BELT - C SECTION - BELT NO. C164

SPAREX TOP LINK PIN (CAT 0) (16MM PIN DIA, 98MM WORKING LENGTH)

SPAREX LOWER LINK BALL (CAT 3/3) (ID: 1 7/16'', OD: 2 17/32'', WIDTH: 1 3/4'')

DIGGA POST HOLE DIGGER - 3 PT LINKAGE 2.2M BOOM (50HP) -TP-000033

FENCE-PRO STANDARD AUGER MOTOR - 75MM / 3 INCH AUGER (EARTH OR TUGSTEN PILOT)

GENTECH 7 KVA WORKSTATION PETROL GENERATOR

SPAREX HYDRAULIC TOP LINK (CAT 3/2) (63MM CYLINDER BORE) (670MM MIN LENGTH)

DIGGA 600MM TREE PLANTING AUGER FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

RAPID PLAS STRAINER DUST COVER FOR RTS005

STANHAY (4) ROW X-30 SEED DRILL INC CAMERA & MONITOR - PRECISION SMALL SEED

Farm Supplies Machinery & Equipment

Dealer Address