Farm Supplies Machinery & Equipment

Suitable for CAB.
The Burder loader series are built to be tough, agile and performs well even under extensive usage.
The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.
Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.
Specifications (refer to images to see A, B, C, D & E):
Front Tyre Max:16.9x28
Volume: 0.98m³
Tractor HP: 100-150
Bucket Width: 2.4m
Rated Capacity (std Bkt): 1500kg
A. Lift Height to Pin: 4250mm
B. Dump Height: 2950mm
C. Dig Depth: 150mm
D. Crowd Angle: 50°
E. Dump Angle: 70°
FEL Weight Incl Std Bucket: 1100kg
Features:
Mechanical Self Level
2 Bank Valve and Joystick Control (cable for CAB Tractors)
Choice of Euro or Burder Hitch at no Extra Cost
Deluxe Quick Detach Loader
Heavy Duty Gravel Bucket
Full Mesh Grille Guard
Vesconite Wear Bushes at all Pivot Points
Adjustable Level Indicator
Plated Greasable Pins
2 Pack Epoxy Paint
Choice of Colour for Loader Arms
24 Month Limited Warranty
* Burder 8000, 9000 and 10000 Series have Soft Ride as Standard
* Burder 9050 and above have 3rd Function as Standard

Options:
2 circuit remote (CAB)
Double Rear Diverter (2 circuit)
Electric front remote (1 circuit)
Hydraulic quick coupler (4 port)
Hydraulic Dampeners Manual Shut off
3rd bank & Front Remotes 6, 8, & 9000 ROPS
3rd bank & Front Remotes 3000 ROPS
Detent per Spool
Front Remotes to plug into Tractor Remotes
Multi Doc-Front Remotes Male & Female
Multi Doc-Front Remotes Male Only
6 Port Hydraulic Quick Coupler
Hydraulic Dampeners Electric Upgrade
Eco-pro Joystick Upgrade
Hydraulic Quick Change (Upgrade Optional) - Requires 3rd function to operate (Additional cost)
4th Function
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 2.4M BURDER FRONT END LOADER (100-150HP)

Quickly and easily tighten the tension cable.
The socket is 410mm long allowing the tension rod to travel up the inside without bottoming out.
It suits a 1/2 drill/ratchet drive.
Our tube spanners are designed specifically to tight the tension cables that come with many of our end assembly kits. It is suited for an 18mm nut (M12)
The spanner is 450mm long to fit over the end of the cable assemblies long eye bolt. The extra long socket allows you to tighten the nut quickly and easily.
It suits a 0.5 inch drive for your compact drill and can also be used with a standard ratchet.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 10+.
Specifications:
- 300mm W x400mm L Footplate
- <165mm post
- Stainless steel cable
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL TUBE SPANNER - STS

ARS Telescopic Cut & Hold Pruner/Picker - 1.8m to 3.0m.
Weighs 1.31 kg.
Perfectly balanced for ease of use and accuracy, these poles are light and maneuverable and provide sharp and accurate precision pruning at heights that would otherwise require a ladder.
The long reach cut and hold picker head has razor sharp blades is ideal for dead-heading, manicuring, and harvesting/ fruit picking.
Featuring a die-cast aluminium handle that's ergonomically designed for continued use and has a comfortable rubberised grip over a cast aluminium handle which swivels to obtain best cutting position for the user.
A single lever enables telescoping operation from 1.8 to 3.0m.
Features:
- High carbon tool steel blades are drop forged or Marquench hardened for long-lasting sharpness and durability
- Hard-chrome plated blades for rust and sap protection
- Lightweight with ergonomic grip for all day use
- Rotate the pole in the handle for precise pruning angles
- Die-cast aluminum construction for superior durability
- Telescopic operation from 1.8 to 3.0m reach
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ARS TELESCOPIC CUT & HOLD PICKER/PRUNER - 1.8M TO 3.0M

PTO Friction Clutch.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO FRICTION CLUTCH - IN LINE - 45HP

The Wiedenmann Whispher Twister is a highly efficient and low-noise leaf blower, designed for professional use on golf courses, sports fields, parks, and municipal surfaces.
With its innovative whisper turbine and patented swivel system, it delivers exceptional performance while maintaining quiet operation in sensitive environments.
Min HP = 25hp+
Weight = 200 kg
Features:
- Low-Noise Whisper Turbine: Specially designed for operation in public areas and residential environments, the whisper turbine ensures powerful airflow with reduced noise levels.
- Patented 180° Swivel Mechanism: The unique, continuously variable 180° swivel systemoperated via a single hydraulic cylinder or electric spindleallows the blower to redirect airflow seamlessly, keeping leaves and debris moving in the same direction without reversing or time-consuming manoeuvres.
- Efficient All-Around Operation: Capable of sweeping left to right without turning the tractor, the WHISPER TWISTER maximises productivity and reduces wear on turf and machinery.
- Adjustable Airflow Control: A vertically adjustable air nozzle enables operators to tailor the airflow to site conditions, ensuring optimal results on all surfaces.
- Ground-Hugging Adaptability: A large support wheel provides consistent ground contact and effective operation, even on uneven terrain.
- High Air Performance: Delivers an air volume of approximately 200 m³/min at a speed of around 50 m/sec, making it a reliable solution for clearing large turf and municipal areas quickly and efficiently.
Standard Build Inclusions:
- Drive Type (must select one)
460121 Drive 1000 RPM (right), 460122 Drive 1000 RPM (left)
460123 Drive 2000 RPM (right), 460124 Drive 2000 RPM (left)
- 460025 Straight Blow-Out Nozzle
Optional Items:
46018 - Hydraulic Adjustment of Turbine Vertical Position
46038 - Electric Spindle for Horizontal Turbine Swivelling
1205939 - Drop-Down Nozzle
1208500 - Reverse Nozzle
46029600 - Additional Year Warranty Extension (24 months total)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WIEDENMANN LOW NOISE LEAF BLOWER (FIELDS / OVALS / PADDOCKS) 25HP+

OD = 170 mm
ID = 150 mm
Height = 56 mm
Manufactured from high quality chemical resistant UV stabilised polypropylene for durability. Two start threads are convenient and larger screw type lids feature twist on / off centre cap, incorporating a double breather valve (single on smaller lids) for fast tank filling and quick emptying.
Other sizes are available (refer to picture) to suit many applications - eg. filling points, inspection hatches and man-holes used in agricultural water and chemical tanks.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 170 MM TANK LID (FEMALE THREAD WITH BREATHER)

Specifications:
Market: Viticulture.
Tank Size (L): 1,500
Connection Type: Trailed
Min PTO hp: 60
Pump Size (L/min): 500+
Height / Width / Length (mm): 3330 / 1800 (less head), 2490 (folded) / 4570
Product Weight (kg): 890 (dry)
Application: Vineyards
Includes spray heads, independent 320mm hydraulic fans, hydraulic drive stainless steel pump, automatic spray rate controller, self contained hydraulic drive system and tandem suspension axle. Ideal for vineyards.
Model Specifications
- Head Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Left and right arms are independent hydraulic folding with adjustable width and centre frame. Boom frame is galvanised.
- Pump Multi-stage hydraulic drive pump, multiple impellers made with highly resistant engineering plastic for excellent chemical compatibility. 500+L/min. Driven by tractor remotes.
- Fan Size 320mm turbine fan, one per air tube, 3600rpm. Power consumed 29kw/38HP.
- Hydraulic Control Hitch mounted hydraulic power pack with: 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anti-cavitation and pressure relief valves, 12V oil cooler.
- Nozzles Air shear.
- Controls Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
- Tank Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
- Frame Galvanised steel chassis, linkage hitch fitted with hydraulic power pack.
- Agitation Venturi agitator.
- Filtration Lid strainer and large capacity suction filter.
- Wheel Equipment Tandem suspension with 10x15inch wheels and tyres.
- PTO Driveshaft Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
- HP Required Minimum 60 PTO HP
Dimensions - Length measured with linkage hitch:
Length: 4570mm
Width Less Head: 1800mm
Width Folded: 2490mm
Height: 3330mm
Weight 890kg (Dry)
Factory Options
- Hydraulic pump driven through power pack.
- Hydraulic Height Adjustment phased or independent.
- Hydraulic Row width adjustment phased or independent.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) up to 5 sections.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) 7 sections.
- Bravo 400S automatic rate controller with GPS guidance (in lieu) 7 spray sections.
- Bravo 400S automatic rate controller with hydraulic controls, GPS guidance (in lieu) 7 spray sections + 7 hydraulic sections.
- IBX 100 ISOBUS controller (in lieu requires compatible in-cab console).
- Delta 80 Universal Terminal to suit ISOBUS control.
- Quick turning hitch.
- Electric braked tandem suspension axle via trailer plug in lieu of standard axle.
- Hydraulic braked tandem suspension axle in lieu requires compatible tractor remotes.
- 100L Flush Tank
- Road Kit Brake and indicator lights with folding Oversize sign.
- Tail Light Kit Brake and indicator lights via trailer plug.
NOTE: Not all options will fit all models. Extra charges may apply to fitment of some options.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1,500L (2 ROW) TRAILED SCRAM CROSS - MIN 60PTO HP

Simple & Strong. Need an auger for your wooden fence posts? Our hard wood augers make installing your latches a breeze.
Our augers are perfect for drilling clean holes through your timber posts. We have a wide variety of sizes for a multitude of uses:
Our smaller sizes are excellent for drilling holes for latches and for holes to run wire through.
The 18mm and 20mm augers provide a great fit for our gate kits.
We also provide bigger sizes which are better for drilling holes to run barb wire through your posts.
If you are purchasing an auger to install a gate kit, we recommend you use a slightly larger sized auger. For example, if you are getting a 16mm gate kit, get the 18mm auger. If you need to pull the gate kit out in the future the larger hole will make it easier. It will simply slide in and out with minimal hassle.
Important! Use your Auger Correctly. Every brand of wood auger is engineered slightly different. Its critical that the auger is used how the manufacturer intended. There are important features of these augers:
These augers have a coarse thread for faster penetration at low revs (250rpm). Let the auger do the work. All you need to do is hold the drill straight (dont try and push it through the post). If its a big post, pull the auger out occasionally to help remove the wood chips. Each auger includes a cutting head with obtuse angles. This decreases the frequency between sharpens, minimising your downtime.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 32mm auger
- 450mm overall length
- 362mm flute length
- 8mm screw
Features:
- Strong
- Simple to use
- Designed to work with our gate kits
- time saving
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL HARDWOOD AUGER 32MMX450MM - HA32450

Earthway ES P60009 Standard Seed Plates
These are the plates that originally come with the seeder and include one plate each for corn, peas, beans, carrots, beets, and radishes.
These will work well with other seeds and are often modified by cutting and filing to accommodate a specific need.
Six precision seed plates for...
Sweet Corn
Radish/Leeks/Spinach
Carrots/Lettuce/Turnips
Beans/Small Peas
Jumbo Peas
Beets/Okra/Swiss Chard
Standard Seed Plates for the Earthway Seeder.
Plates are made of durable plastic.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

EARTHWAY STANDARD SEED PLATES - ES60009

Working Width = 1,800 mm
Capacity = 5.0 m3
Weight = 2,550 kg
Min HP = 85 hp
Developed using the expertise of GKBs contracting division, the Sandmover is built to be the ideal partner for sports pitch installations and large-scale groundworks. It provides a precise and efficient way to apply profile layers or fill drainage trenches, even on demanding projects.
The Sandmover delivers accurate application of sand, split or gravel across wide areas. Available in 180, 200 or 250cm (70, 79 or 98) working widths and with hopper capacities up to 6m³, layer thickness can be mechanically adjusted between 2 and 10cm (0.73.9). An optional hydraulically adjustable conveyor belt enables precise filling of drainage trenches.
Designed for reliability and long-term performance, the Sandmover features robust build quality without complicated hydraulic or electrical systems, reducing maintenance requirements and helping to keep operating costs down
Key Features:
- Linkage: Drawbar eye
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GKB MACHINES 5.0 M3 SANDMOVER (85+ HP) TRAILED

1840mm Longline Trough insert with bung
Specifications:
Length: 1840mm
Width: 520mm
Total height: 270mm
Features:
Durable UV stabilised polyethylene for long outdoor life
Rust free polyethylene will not corrode
Smooth finish and 2? drain bung facilitates cleaning
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 1840MM LONGLINE TROUGH INSERT WITH BUNG

Deep ripping is most effective in sandy textured soils where plant roots need to grow deeper to access subsoil moisture.
Deep ripping is of particular benefit when it is used to break through compacted layers, allowing roots to access soil water beneath this layer.
Where root growth is impeded by hard layers, a greater amount of energy is required for roots to grow through compacted soil, therefore production is usually reduced.
After removing the compacted layer by deep ripping, plant roots can grow faster and deeper, increasing the amount water and nutrients available to the crop, resulting in improved yield.
Tips:
Ground must be moist enough to allow ripping tines to penetrate below the compacted layer.
Soil must not be too moist that the ripper tines cause smearing rather than fracturing or shattering of the compacted layer.
Single Shank: (not this model advertised)
Category 2
110hp maximum requirement
Triple Shank:
Category 2 or 3
140hp maximum requirement
Adjustable widths
Both Models Feature:
700mm working depth
30mm shank thickness
Safety shear bolt
Galvanised
Replaceable point
Daken sub-soil rippers are perfect for breaking up compacted and hard soil layers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CAT II OR III THREE SHANK SUB SOIL RIPPER (MAX 140HP)

Find Farm Machinery For Sale. Browse 7523 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

BURDER 2.4M BURDER FRONT END LOADER (100-150HP)

ROTECH RURAL TUBE SPANNER - STS

ARS TELESCOPIC CUT & HOLD PICKER/PRUNER - 1.8M TO 3.0M

SPAREX PTO FRICTION CLUTCH - IN LINE - 45HP

WIEDENMANN LOW NOISE LEAF BLOWER (FIELDS / OVALS / PADDOCKS) 25HP+

SILVAN 170 MM TANK LID (FEMALE THREAD WITH BREATHER)

SILVAN 1,500L (2 ROW) TRAILED SCRAM CROSS - MIN 60PTO HP

ROTECH RURAL HARDWOOD AUGER 32MMX450MM - HA32450

EARTHWAY STANDARD SEED PLATES - ES60009

GKB MACHINES 5.0 M3 SANDMOVER (85+ HP) TRAILED

RAPID PLAS 1840MM LONGLINE TROUGH INSERT WITH BUNG

DAKEN CAT II OR III THREE SHANK SUB SOIL RIPPER (MAX 140HP)

Farm Supplies Machinery & Equipment

Dealer Address