Farm Supplies Machinery & Equipment

This generator is perfect for housing installations, running compressors, welders and much much more. With an Automatic Voltage regulator (AVR) this generator is designed to maintain a consistent voltage level, causing it to be less likely to damage sensitive equipment.
It comes standard with 2 x 15 Amp outlets. Optional extras include wheel kits and centre point lifts.
Specifications:
Power Rating: 8kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.1L
Noise Level @ 7m: 74dBA
Outlets: 2 x 15 Amp
Approx. Fuel Consumption @ 80% Load: 2.58L/Hr
Operation Hours @ 80% Load: 2.36hrs
Fuel Type: Petrol
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 8 KVA AVR PETROL GENERATOR

Pump Specifications:
Model: PHPWP20
Inlet inside: 50mm / 2.0inch
Outlet inside: 50mm / 2.0inch
Lift H.max: 65m
Suction: 7m
Displacement: 550 LPM
Engine Specifications
Engine model: Honda GX200 4-Stroke
Displacement: 196cc
Power: 6.5hhp
Fuel Type: Petrol
Fuel tank capacity: 3.1L
Oil Type: SAE 10W30
Oil Capacity: 0.6L
Low Oil Level Indicator: Yes
Starting System: Recoil start
Weight: 30kg
The Powertech Honda 2" Fire Fighting Pump is a powerful and reliable water pump designed for fighting fires and handling various water pumping tasks. This rugged pump is equipped with a durable Honda GX200 6.5hp engine known for its efficiency and performance.
Key features of the Powertech Honda 2" Fire Fighting pump include:
- 2-inch suction and discharge ports for efficient water flow.
- High pumping capacity twin impeller to quickly move water where it's needed.
- Robust construction for durability and long-term use in tough conditions.
- Easy-starting Honda GX200 4-Stroke engine for reliable operation.
- Portable design and heavy duty frame for easy transport and manoeuvrability to different locations.
- Ideal for firefighting, irrigation, draining flooded areas, and other water transfer applications.
Whether you need to tackle emergency situations or handle routine water pumping tasks, the Powertech Honda 2" Fire Fighting pump is a dependable and powerful tool that can get the job done effectively and efficiently. Trust in the quality and performance of Honda for your water pumping needs.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH HONDA 2" FIRE FIGHTING PUMP

400mm RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PTO - Hydraulic downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL PTO -HYDRAULIC DOWNFORCE

Heavy Duty Top Link Ball (Cat. 3/2).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HEAVY DUTY TOP LINK BALL (CAT 3/2) (ID: 1'', OD: 2 3/8'', WIDTH: 2 1/16'')

Combo Round Bale Fork
A development of Daken's original "Udi Round bale fork". This model will still carry and feed out round bales, but now has three "conus 2" receivers mounted and it's supplied with three spikes. With this additon it will carry large square bales and will also pick up pallets.
Feeding out is simple, carry the bale to site, position the tynes to the side and insert the spikes. With the bale on the ground simply drive the tractor forward and unrolled the bale. Ideally the bale will be positioned to roll out the reverse of how it was baled.
Features:
- Pick up and feed out round bales
- Pick up large square bales
- Will pick up pallets
- Come with 3 hay spikes
- Comes with three 1.2m Hay Spikes
- Weight: 121kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN COMBO ROUND BALE FORK - 50700DC

Top Link Ball End.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO TOP LINK BALL END (CAT 3) - 1 3/8" UNC, 185MM THREAD LENGTH

Conical Head Bolt 2 Flats With Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX CONICAL HEAD BOLT 2 FLATS WITH NUT - M12 X 34MM

NB120 Series Hydraulic Grader Blades - 3.0m.
With the Rear Blade Bison®, you can perform many tasks related to material handling; from levelling terrain to heavy board construction work.
Choose between 5 to 8 feet wide moldboard depending on your needs.
Ideal for light road maintenance, lawn care, gardening, and other light duty landscaping applications.
Offset, angle tilt options come standard on all models.
End plates allow rear blade to hold in material for filling. Skid shoes increase the life of the cutting edge and avoid damaging the working surface while cleaning corrals or plowing snow.
Blades can be used year-around for levelling ground, roadside clearing and snow removal.
Specifications:
- Swing Angle: 45°L/R
- Tilt Adjustment: 21°U/D
- Offset Adjustment: 61cm L/R
- Tail Wheel: N/A
- Hose kits to rear remotes: 3 circuits
- Mounts: Cat II-3 PL
- HP Range: 110 max
- Cutting Edge: ½inch x 6 inch reversible interchangeable
- Weight: 535 kg
* Bushings not included.

Options:
- Single Wheel upgrade
- 2 Optional hydraulic control requires standard 3 "x 8" hydraulic cylinders, agricultural.
- Hydraulic depth wheel upgrade
- 12v diverter kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BISON 3.0M NB120 SERIES HYDRAULIC GRADER BLADE, SUIT UP TO 110HP

Stabiliser Turnbuckle.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX STABILISER TURNBUCKLE - 153MM LENGTH, 3/4" UNC THREAD

Top Link Ball (Cat. 3/3).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK BALL (CAT 3/3) (ID: 1 1/4'', OD: 2 3/8'', WIDTH: 2'')

Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SKID - 336MM LENGTH, 330MM WIDTH - REPLACEMENT FOR CLAAS, KUHN, JOHN DEERE

Cultivator - 3 Row 190
Cultivators are a secondary tillage product, for preparing seedbeds, and controlling weeds.
3 and 4 row models available with heavy duty S tines set up with trash flow pattern.
With the addition of a Bracket a Daken C Seeder can be mounted making it a simple but effective sowing device.
Features:
- Strong rugged construction
- Trash flow tine pattern
- Suits Cat 1 & 2
- C seeder bracket supplied
- 12mm heavy duty S tines
- 3 and 4 rows
- Suitable to have C Seeder mounted
- Tines mounted approx. every 300mm
- 2 Year Warranty
- Weight: 186kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CULTIVATOR MODEL 3 ROW 190 GALVANIZED - 03019DC

Find Farm Machinery For Sale. Browse 7576 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

GENTECH 8 KVA AVR PETROL GENERATOR

POWERTECH HONDA 2" FIRE FIGHTING PUMP

DIGGA 400MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL PTO -HYDRAULIC DOWNFORCE

SPAREX HEAVY DUTY TOP LINK BALL (CAT 3/2) (ID: 1'', OD: 2 3/8'', WIDTH: 2 1/16'')

DAKEN COMBO ROUND BALE FORK - 50700DC

SPENCO TOP LINK BALL END (CAT 3) - 1 3/8" UNC, 185MM THREAD LENGTH

SPAREX CONICAL HEAD BOLT 2 FLATS WITH NUT - M12 X 34MM

BISON 3.0M NB120 SERIES HYDRAULIC GRADER BLADE, SUIT UP TO 110HP

SPAREX STABILISER TURNBUCKLE - 153MM LENGTH, 3/4" UNC THREAD

SPAREX TOP LINK BALL (CAT 3/3) (ID: 1 1/4'', OD: 2 3/8'', WIDTH: 2'')

SPAREX SKID - 336MM LENGTH, 330MM WIDTH - REPLACEMENT FOR CLAAS, KUHN, JOHN DEERE

DAKEN CULTIVATOR MODEL 3 ROW 190 GALVANIZED - 03019DC

Farm Supplies Machinery & Equipment

Dealer Address