Farm Supplies Machinery & Equipment

The most convenient end assembly kit. Load on and go!
Our kits are all made from steel and are either hot-dipped galvanised, galvabond or stainless steel. This means they are termite proof, fireproof and long-lasting.
These kits are perfect if you have a pneumatic driver or proper setup. If you are looking to drive your posts in by hand, we recommend you purchase our Drive-Tight strainer post kits. They take less than 15 minutes to drive your post in and install the strainer kit!
With this kit, you have the choice of an 80NB or 100NB strainer post. Each strainer post is slightly longer and thicker than your standard post, allowing you to drive it in. You can also choose between a 40NB stay (good general-purpose stay), or a 50NB stay (more heavy-duty).
Price quoted is for one kit. Kit includes...
Post, Cap, Stay, Post & Stay Connector, Footplate, & Tension Cable
Discounts apply for bulk kit purchases of 10+ or 60+.
Contact dealer for bulk pricing.
Features:
- Fast install
- Strong
- No welding
- Works on any angle
- Galvanised
Specifications:
- 100 NB (114mm O.D) post
- 4.5mm post wall thickness
- 2400mm (8') post length
- 40NB (48mm O.D) Stay
- 2.3mm Stay wall thickness
- 3250mm (11') Stay length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL DRIVABLE (HEAVY WALL) ROUND POST FENCE END KIT- 100NB X 40NB - RSAT4.5

11,260L Slurry Tanker - recessed axle.
Premium slurry tanker with recessed axle and tyres for where flotation is an issue and low ground pressure is needed. Ideal for contractors and large dairy farmers.
Specifications:
Capacity (L) - 11,260
Overall Length (mm) - 6,660
Unladen Weight (kg) - 4,000
Features:
Parabolic leaf sprung drawbar
500/60 x 22.5 flotation tyres
MEC 9000 l/min ballast pump
LED road lights
Wide angle driveshaft
Double trap system
Relief valve
Pressure gauge
Front sight tube
Rear sight glass
4 x 6" filing points
1 x 6" manual parallel hose quick coupler
Brackets to retro fit autofill (6")
Manual gate valve for filling
Hydraulic rear valve for empting
Inverted splash plate
12m of 6" hose (2 x 6m lengths)
Side hose carrying brackets
Rear inspection hatch (20")
Hydraulic brakes
Swivel hitch
Winding jack
Handbrake
Safety chains on drawbar
6" bottom outlet
50mm rear tap
10 year steel warranty
Pressed dome ends
6mm EN42 high carbon steel
High glass painted finish
Models:
AB 2250R 10,460 Capacity 6660mm Length 3,700kg Weight
AB 2250R 11,260 Capacity 6660mm Length 4,000kg Weight
AB 3000R 13,840 Capacity 7500mm Length 4,680kg Weight
Options: 6 and 8" autofill arms for quick and easy filling - available ex stock. Side or mid-mount available. Standard with double flex joints. Range of other options available, ex factory.
Autofill options:
6" side autofill c/w docking station (SD & R series tankers)
6" turbo filler for autofill arm
8" side autofill c/w docking station (Tandem/Tri-Axle series tankers)
8" turbofiller for autofill arm
Options (In Lieu of Standard):
11,000 litre pump on lieu of 9,000L (AB1600 / 2000SD)
13,500 litre pump on lieu of 9,000L (AB1600 / 2000SD)
Hydraulic remote control for pump
Galvanised tank (AB1600 / 2000SD)
Galvanised tank (AB2250R / 2500R)
Galvanised tank (AB3000T / 3500T / 4000T)
8" hose + couplings in lieu of 6" (SD + R series tankers)
Extra 6m 6" hose c/w fittings
Extra 6m 8" hose c/w fittings
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ABBEY 11,260L RECESSED AXLE SLURRY TANKER

Specifications:
Pump Size (L/min) : 150
Max Pressure: 20 Bar / 290 psi
Hose Inlet: 19mm
Size Outlet: 13mm
Bypass Hose: 23mm
Control Valve: 4 Outlet
Pump App: BP60/20, BP125/20
Control valves regulate spray pressure, direct the flow of spray liquid from the pump to the spray nozzles and bypass excess liquid back to the tank, in most cases through an agitator.
All feature adjustable pressure regulator, glycerine filled gauge, hose connections, mounting kits where applicable, on/off directional valves and bypass lock position. One lever 4 outlet control shuts all boom sections off by simply flicking main lever to one side, standard with dual stage gauge.
Supplied with remote bracket kit (C5004-05).
Features:
To suit BP60/20 (CBP06020)
To suit BP125/20 (CBP12520)
One lever 4 outlet control shuts all boom sections off by simply flicking main lever to one side
Standard with dual stage gauge
19mm inlet / 13mm outlet
23mm Bypass hose size
20 bar / 290 psi Max pressure
150 L/min max flow
Supplied with remote bracket kit (C5004-05)
Capacity 150 Litres
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 4 OUTLET CONTROL VALVE

A light duty dual mount slasher for grass and light work. Ideal for compact tractors. Front and rear stone guarding as standard.
Features:
Body designed with 3mm top plate and strong 6mm thick adjustable skids.
Italian made Bondioli & Pavesi Series 2 pto driveshaft with shearbolt protection rated at 900NM. Optional 2 plate slip clutch with Series 4 shaft. (The clutch is standard on the TA135 and TA150 models).
Cat 1 linkage with both offset and centre mount positions.
Hardened and tempered stepped/bushed slasher blades.
Standard with full length hinging rear steel stone flap and front rubber guard.
Adjustable skids have cutting height range of 25 100mm.
40 HP oil lubricated gearbox.
Floating headstock.
Document holder fitted.
Full 12 month warranty on design and manufacture.
Specifications:
Cutting Width 1460mm
Overall Width 1560mm
Overall Length 1580mm
Tractor HP 25-50
Cutting Height 25-100mm
Weight 245kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TA150 LIGHT DUTY SLASHERS 1.5M - 0364, 40HP

Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
Male Thread = 3/4" BSP
Female Thread = 1" BSP
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 3/4" TO 1" REDUCING MALE/FEMALE NIPPLE

Blade for FEL (Front End Loader) with reversible root rake 8000 Series - 2.10m.
The reversible blade & root rake allows the operator to switch over to a root rake when the blade is not in use for earth moving activities.
Top soil does not disappear as the reversible root rake will only pick up debris caught along the way.
There are multiple configurations for the reversible blade & root rake.
Features:
- Manual angle
- Manual tilt
- Hydraulic angle
- Hydraulic tilt
Optional flip down root rake.
Specifications:
- Width (m): 2.10m
- Height (mm): 720
- HP Range: 50-100
- Base Weight (kg): 275
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 8000 SERIES 2.10M - 50-100 HP RANGE

Post Hole Digger Augers - 350mm (13.8") Auger
Post Hole diggers will not work properly without a good quality properly designed Auger.
Daken Post Hole Digger Augers are built around a heavy main shaft, with think flighting, and heavy duty auger heads.
The flighting has the best geometry to not clog and clear the soil.
Features:
- 6mm flighting
- Replaceable teeth
- Replaceable centre point
- Fits 2 round output shaft
Not suitable for Little Ripper Digger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN POST HOLE DIGGER AUGERS - 350MM (13.8") AUGER - 81215DC

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ8 Specifications:
Oil Flow: 36 - 20
HP Range: 50 - 90
Buckets That Suit This Loader:
1.9 Heavy Duty Gravel Bucket
1.8 - 8000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll Attachment Components - Less Load on the Tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - Best view and high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Convincing benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ8 FRONT END LOADER (50 - 90 HP) (20 - 36 LPM)

We reckon even Houdini Mouse will not escape one of these.
Like all live-catch traps, mice go into these more for the social experience than for the food it is baited with.
Dimensions:
Small: 18cm L x 10cm W x 7cm H.
Large: 29cm L x 14cm W x 12cm H.
All zinc plated steel.
Easily opened by swing-over bars.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF SMALL 18CM LONG MOUSE DROP-IN TRAP

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ20 Specifications:
Oil Flow: 39 - 23
HP Range: 70 - 110
Buckets That Suit This Loader:
1.9, 2.05 Heavy Duty Gravel Bucket
1.8 - 8000, 2.1 - 8000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll Attachment Components - less load on the tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - best view & high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Convincing benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ20 FRONT END LOADER (70 - 110 HP) (39 - 23 LPM)

Boom sprayers require regular maintenance and calibration checks for accurate chemical application rate. Boom Kleen (150g/L potassium hydroxide, 40g/L available chlorine) is ideal for cleaning spray booms contaminated with residues.
Boom Kleen is a caustic substance that cleans and neutralises all internal pump, hose and boom surfaces but is harmless to grass and crops. Use at the beginning and end of the season as well as at regular intervals and between different spray programs.
To use mix at the following ratios:
Knapsacks/Misters 1:100
Orchard Sprayers 3:100
Aircraft 2.5:100;
Flush thoroughly and rinse twice.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SHOOF 5L BOOM CLEANER

Heavy duty hydraulic grader blade for tractors up to 130 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 130 hp
2700mm (9') wide
600kg
Reversible cutting edge
Full three way adjustment (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 600-M (manual operation)
Contractor 600-1 (hydraulic - 1 ram)
Contractor 600-2 (hydraulic - 2 ram)
Contractor 600-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (2 RAM) CONTRACTOR GRADER BLADE

Find Farm Machinery For Sale. Browse 7588 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

ROTECH RURAL DRIVABLE (HEAVY WALL) ROUND POST FENCE END KIT- 100NB X 40NB - RSAT4.5

ABBEY 11,260L RECESSED AXLE SLURRY TANKER

SILVAN 4 OUTLET CONTROL VALVE

JOHN BERENDS TA150 LIGHT DUTY SLASHERS 1.5M - 0364, 40HP

SILVAN 3/4" TO 1" REDUCING MALE/FEMALE NIPPLE

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 8000 SERIES 2.10M - 50-100 HP RANGE

DAKEN POST HOLE DIGGER AUGERS - 350MM (13.8") AUGER - 81215DC

BURDER STOLL FZ8 FRONT END LOADER (50 - 90 HP) (20 - 36 LPM)

SHOOF SMALL 18CM LONG MOUSE DROP-IN TRAP

BURDER STOLL FZ20 FRONT END LOADER (70 - 110 HP) (39 - 23 LPM)

SHOOF 5L BOOM CLEANER

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (2 RAM) CONTRACTOR GRADER BLADE

Farm Supplies Machinery & Equipment

Dealer Address