Farm Supplies Machinery & Equipment

As used on Selecta foam markers. Ideal for high volume, low pressure foam making application.
Features:
- 1/8" BSP outlet
- 37 L/min @ 32 kPa / 4.6psi
- 60W
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 12V COMPRESSOR (37L / MIN)

Extra heavy duty hydraulic side-shift mulcher, for tractors from 80-140 hp. Suitable for mowing grass and mulching prunings and wood up to 150mm in diameter.
Features:
- 140 hp rated gearbox
- 2400 RPM rotor speed
- 30cm high intake
- Integrated over-run clutch
- High clearance intake (30cm)
- Hydraulic side shift (60cm)
- Fixed upper and rear counter blades
- Double skinned chassis
- 220mm diameter adjustable rear roller for cutting height
- Side skids
- 5 belt side transmission with automatic belt tensioner
- 540 rpm PTO
- Front protection chains
- Flat hammer flails (1.4kg)
- 20mm flail bolt
- 8 + 8mm chassis
Overall Width = 2,280 mm
Cutting Width - 2,000 mm
Hammers = 18
HP Required = 80 - 100hp
Weight = 970 kg
Options Available:
Y Flails, in Lieu of Hammer Blades
Self Steering Rear Wheels, in Lieu of rear roller
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2M (80-100HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

LEMPRET WIRE & SEALANTS SNAKE MESH - 900MM HIGH X 30M LONG

20mm Weld on Pins & Sleeves
Australian made.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

LEMPRET WIRE & SEALANTS 27MM WELD ON PINS & SLEEVES (SINGLE ASSEMBLY)

The fully galvanised Sabre slasher is built tough in Australia with a strong 5mm pressed deck, floating headstock, friction clutch, adjustable skids and front and rear chainguards. The ideal slasher to suit your compact tractor.
Features:
Suits 18-40HP tractors
SABRE range of offsettable rotary slashers
5mm galvanized deck
Cat 1
Adjustable skids
Floating top link
PTO driveshaft
Friction clutch
Front & rear chain guards
Gearbox available in red or yellow.
Specifications:
Overall width: 1.2m
Cutting width: 1.1m (3'6")
Weight: 180kg
HP: 18-40
Finish: Galvanised deck
Options:
- Combination Friction and Overrun Clutch
- 50HP Gearbox Option (50HP standard on SBR18-500)
- Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP SABRE SERIES SLASHER 1.2M - GALVANISED DECK, SUIT 18-40HP

ID = 2 "
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 2" (ID) FLAT GASKET

Stick Rake for FEL (Front End Loader) 3000 Series - 1.50m. (Mesh is not included in this price).
The stick rake is suitable for use in clearing sticks, branches and scrub from an unused area or your paddock.
180mm tine spacing gfd.
Specifications:
- Width (m): 1.50m
- Height (mm): 600
- HP Range: 20-45
Optional extras:
- wings
- mesh in-fill
- mesh top
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER FEL STICK RAKE 3000 SERIES 1.50M - 20-45 HP RANGE

Emergency Thermal Blanket.
This double sided metallic foil blanket is excellent for aiding in body temperature recovery in cases of hypothermia and animals suffering from shock.
It reflects back up to 80% of the patients body heat thereby reducing temperature loss.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SHOOF EMERGENCY THERMAL BLANKET - 140CM X 200CM

Australian Made to suit the harsh Australian environment
Weighing 13.5kg for the CHPD52 and 15.5kg for the CHPD78, both models are lightweight and portable but still able to drive posts as swiftly as much larger and heavier hydraulic and pneumatic tools.
The high impact hammer action of 1720BPM will drive steel fence pickets into the hardest ground in a matter of seconds and the portable design allows operators to move along a fence line with ease. The driver uses an efficient Honda GX35 4-stroke motor to give the best service life possible.
The CHPD52 (this model) has a 52mm receiver guide tube which allows most standard posts and pipe up to 50mm diameter, as well as timber 35mm square to be driven, while the CHPD78 (next size model) has a redesigned lower hammer section to allow much larger posts and pipe to be driven right up to 75mm diameter without any other adapters.
Blows Per Minute - 1720
Joules - 26
KW - 1.0 (1.3hp) at 7,000 rpm, 4-stroke, overhead cam Trigger throttle with integrated stop button, Spring isolated hand grips
Fuel Consumption - 0.71 L/h at 7,000 rpm. Meets strictest worldwide emission and noise requirements
Starting System - recoil (pull start)
Rating - Continuous use on standard posts
Weight - 13.5kg
Engine Warranty - 3 Year genuine Honda warranty
Post Driver Warranty - 12 months parts failure
Noise Level - 100dB Hearing protection required
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE

CHRISTIE CHPD52 - 52MM POST DRIVER

Burder 12FT (75-100HP) Drag Scraper with Tilt & Dual Wheels. 3.66m Cutting Width.
Made in Australia.
Specifications:
HP: 75-100
Cutting Width: 3.66m
Capacity: 2.29m3
Approx. Weight: 782kg
Options:
- Rippers
- Laser Mounts
The Burder Drag Scrapers are great for touch up and limited land levelling. They work great for short haul projects, smoothing, and small jobs that do not justify the expense of an Ejection Scraper.
This Drag Scraper comes with a tilt feature, allowing you to cut ditches, or crown roads.
The Drag Scraper comes in 4 widths from 8ft (2.44m) to 14ft (4.27m). Whatever your scraping job, we have a scraper to fit your needs.
Rippers (scarifiers) are available for all our standard drag scrapers.
These are good for scarifying and loosening in advance of levelling and planning and with the ripper assembly being hydraulically operated you are able control the depth up to 6 inches from the bottom of the scraper with ease.
The Burder Drag Scraper is the Perfect tool for:
- Road and driveway maintenance
- Site prep
- Pulling material out of buildings
- Snow removal
- Land levelling
Features:
- Reversible cutting edges.
- Swivel hitch.
- Large capacity box.
- Large end plates.
- Ripper options available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 12FT (75-100HP) DRAG SCRAPER WITH TILT & DUAL WHEELS

Round Linch Pin (bucket of 150).
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROUND LINCH PIN (150 PCS. SMALL BUCKET) (9.5MM PIN DIA, 44.5MM TOTAL LENGTH)

The Nobili BNG series mulchers are a versatile machine ideal for a broad range of mulching applications. They are fitted with a tailboard that can be opened for ease of maintenance and a mulching bar to produce a finer mulch.
Height control is maintained by adjustable skids.
Features:
Suggested Use: Grass, stubble, pasture topping, vegetable topping, regrowth and green pruning's to 75mm diameter.
Construction: High profile body, opening tailboard one mulching bar.
Control: Fixed headstock .
Drive Line: PTO drive shaft with safety cover, heavy duty oil bath gearbox, taper locked pulleys, and electronically balanced rotor.
Attachment: Cat. I or II three point linkage, floating top link.
Height Control: Skids.
Specifications:
Y Blades: 56
Connection Type: Linkage
Tractor HP: 80-125 HP
Working Width (mm): 2670
Product Weight (kg): 1130
Width / Depth / Height (mm): 2920 / 1080 / 710
Options:
Full Width Roller
Semi Swivel Wheels
Wear Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI BNG PASTURE MULCHERS 2.7M - BNG270/01

Find Farm Machinery For Sale. Browse 7579 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 12V COMPRESSOR (37L / MIN)

CELLI 2M (80-100HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

LEMPRET WIRE & SEALANTS SNAKE MESH - 900MM HIGH X 30M LONG

LEMPRET WIRE & SEALANTS 27MM WELD ON PINS & SLEEVES (SINGLE ASSEMBLY)

FIELDQUIP SABRE SERIES SLASHER 1.2M - GALVANISED DECK, SUIT 18-40HP

SILVAN 2" (ID) FLAT GASKET

BURDER FEL STICK RAKE 3000 SERIES 1.50M - 20-45 HP RANGE

SHOOF EMERGENCY THERMAL BLANKET - 140CM X 200CM

CHRISTIE CHPD52 - 52MM POST DRIVER

BURDER 12FT (75-100HP) DRAG SCRAPER WITH TILT & DUAL WHEELS

SPAREX ROUND LINCH PIN (150 PCS. SMALL BUCKET) (9.5MM PIN DIA, 44.5MM TOTAL LENGTH)

NOBILI BNG PASTURE MULCHERS 2.7M - BNG270/01

Farm Supplies Machinery & Equipment

Dealer Address