Farm Supplies Machinery & Equipment

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
7 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 7'9" (2.3M) - 0183

A Smooth Rust Resistant Capping.
Looking for a smooth finish for your RHS? Our square post caps will stop water getting in and corroding your RHS posts.
Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. Its that simple.
Each galvabond square post cap is made from mild steel to ensure a long lasting and strong cap.
Each cap has little ridges on the inside, which means once the cap is on, it wont come off.
What is A Galvabond Finish?
Wondering what a galvabond finish is? What's the difference between a galvanised cap versus a galvabond cap?
A galvanised product, is when the product is made then hot dipped galvanised.
A galvabond cap is created when we get a pre-galvanised sheet and punch the cap out. This creates a lot smoother finish, yet still remains corrosion resistant.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 100mm square
- Galvabond
Features:
- Smooth finish
- Won't come off
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 100MM SQUARE POST CAP - PC100

A heavy duty chemical bucket with graduated handgrip, made from quality U.V. stabilised polyethylene.
Will stand the test of time.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 25L CHEMICAL MEASURING BUCKET

Blade for FEL (Front End Loader) with reversible root rake 6000 Series - 1.50m.
The reversible blade & root rake allows the operator to switch over to a root rake when the blade is not in use for earth moving activities.
Top soil does not disappear as the reversible root rake will only pick up debris caught along the way.
There are multiple configurations for the reversible blade & root rake.
Features:
- Manual angle
- Manual tilt
- Hydraulic angle
- Hydraulic tilt
Optional flip down root rake.
Specifications:
- Width (m): 1.50m
- Height (mm): 570
- HP Range: 40-60
- Base Weight (kg): 170
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 6000 SERIES 1.50M - 40-60 HP RANGE

Size = 2 "
Suits 40mm hose
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 2" ELBOW (SUIT 40MM HOSE)

TRP-RT 120, 145, 175 mulchers are tractor-mounted machines to be fitted to the tractor three-point linkage. Ideal to collect, to shred and to store pruning of vineyards, orchards and olive groves.
Unique for the big-bags made of special transpiring material ensuring a natural mulched product drying. They properly shred pruning residues aimed to be collected for energetic purposes.
TRP-RT range is equipped with a pick-up device - for pruning lifting - avoiding grass, stones and soil entering into the mulching chamber.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540 / 1000
Tractor horse power HP: 70-130, KW: 51-96
Working Width: 1200mm
Overall Width: 1450mm
Weight: 1070kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller wheels (adds 200mm to overall width for TRP120/06 RT + TRP145/06 RT, adds 190mm to TRP175/06 RT)
- Front wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.2M TRP-RT MULCHER (SUIT 70-130HP)

2.0m Silage Grab (11 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.0M SILAGE GRAB

The Nobili BV PRO series mulchers are a heavy duty multi-purpose machine used for road side mulching by councils and ideal for orchard use.
A double skin improves durability and height control is adjustable with a full width roller with removable ends. Two mulching bars and a restrictor bar are fitted to produce a finer mulch.
The BV PRO has side shift to the right with a hydraulic side shift option.
Features:
Suggested Use: Grass and green pruning's up to 100mm diameter.
Construction: Low profile body, double skin, two mulching bars and one restrictor bar.
Control: Manual side shift with optional hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty gearbox fitted with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I and II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Blades: 24 Cast Hammers
Min PTO HP: 75-130 HP
Working Width (mm): 1900
Overall Width (mm): 2127
Product Weight (kg): 970
Options:
Hydraulic Side Shift
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BV PRO ORCHARD MULCHERS 1.9M - BV2000/06, 75-130HP

CBM Lower Link Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CBM LOWER LINK PIN (25MM PIN DIA) (109MM WORKING LENGTH)

The PT Series are the specialised range of Climaxx Ramps designed for use with All Surface Loader Rubber Tracks. The tread surfaces in this range are configured to reduce the possibility of damage to these types of tracks and are generally wider than Rubber Series and T Series Ramps. Ideal for owners and operators who need to safely and effectively transport machinery fitted with All Surface Loader Rubber Tracks.
Whilst catering for the distinctive features of such tracks, these models can also be used with pneumatic tyres. Select from this range where machinery fitted with All Surface Loader Rubber Tracks as well as machinery with pneumatic tyres are to be loaded.
For loading machinery with Steel Tracks [including with Rubber Pads], the Climaxx T Series Ramps must be used. Where machinery with pneumatic tyres, or rubber tracks is to be loaded, the Climaxx Rubber Series offer a more lightweight and economical alternative. Please see the table below, for the full range of Climaxx PT Series Ramps.
Specifications:
Rated Capacity: 3,000kg
Ramp Mass: 36kg
Ramp Length: 3.3m
Track Width (internal): 450mm
Ramp Width: 550mm
Ramp Depth: 110mm
Features:
Tread Surface of PT Series Ramps.
Steel Pin Connection.
Foot matching Ramp gradient.
Models:
7/3033PT - 3,000kg Rated Capacity, 36kg Ramp Mass, 3.3m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 110mm Ramp Depth
7/3033PTW - 3,000kg Rated Capacity, 38kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 110mm Ramp Depth
7/3635PT - 3,600kg Rated Capacity, 41kg Ramp Mass, 3.5m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 120mm Ramp Depth
7/4526PT - 4,500kg Rated Capacity, 46kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/4536PTW - 4,500kg Rated Capacity, 48kg Ramp Mass, 3.6m Ramp Length, 550mm Track Width (internal), 660mm Ramp Width, 125mm Ramp Depth
7/4833PT - 4,800kg Rated Capacity, 42kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.3M, 3,000KG CAPACITY (55CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

2" Ny-glass through tank fitting with LH thread
Plastic tank outlets:
Left-hand threaded lock nut for secure fitting
Suitable for use with potable water and a wide range of liquids
Corrugated tank outlets:
Poly outlets have corrugated gaskets for fitting through tank walls
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 2" NY-GLASS THROUGH TANK FITTING WITH L/H THREAD

2.56m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3502 - 2.56m (8ft 5in) 1/12 Tine, 2/16 Tine - 44kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Find Farm Machinery For Sale. Browse 7523 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 7'9" (2.3M) - 0183

ROTECH RURAL 100MM SQUARE POST CAP - PC100

SILVAN 25L CHEMICAL MEASURING BUCKET

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 6000 SERIES 1.50M - 40-60 HP RANGE

SILVAN 2" ELBOW (SUIT 40MM HOSE)

NOBILI 1.2M TRP-RT MULCHER (SUIT 70-130HP)

RATA 2.0M SILAGE GRAB

NOBILI BV PRO ORCHARD MULCHERS 1.9M - BV2000/06, 75-130HP

CBM LOWER LINK PIN (25MM PIN DIA) (109MM WORKING LENGTH)

SUREWELD 3.3M, 3,000KG CAPACITY (55CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

RAPID PLAS 2" NY-GLASS THROUGH TANK FITTING WITH L/H THREAD

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Farm Supplies Machinery & Equipment

Dealer Address