Farm Supplies Machinery & Equipment

Top Link Locking Collar.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO TOP LINK LOCKING COLLAR - M36 METRIC

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60 -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

Slasher - 3pt Linkage - 1,500 mm wide- twin blade- dual rotation single cutting bar - flow 35-80 LPM.
Price inclusions: slasher, pins, hoses & couplers - excludes 3pt linkage mount.
Also available in 1800mm width.
The 3pt Linkage Slasher is a slashing attachment for tractors that can be used for the effective cutting and clearing of grass and low ground shrubbery.
Hydraulically driven models are available to fit all CAT 1 and CAT 2 Tractors and come complete with hoses, couplers and 3pt Linkage.
Ideal for landscaping, agriculture, roadway maintenance, parks maintenance and general slashing.
Features:
- Twin blade, dual rotation, single cutting bar
- Two widths available: 1500mm (59') and 1800mm (70')
- Chain curtain for debris suppression
- Adjustable height 40mm - 140mm
- Optional jockey wheel available
- Heavy duty construction - built for Australian conditions
- Rounded side skids for smoother manoeuvrability over
uneven terrain.
Specifications:
- Weight: 370kg
- Length: 1860mm
- Width: 1630mm
- Height: 605-705mm
- Max Pressure: 240 bar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA SLASHER 3PT LINKAGE-1500MM WIDE- TWIN BLADE- SL-000103

Air Hammer Guide is designed as an aftermarket adapter to suit current-model Marchant air hammers.
Primary advantages:
- No need to swap between maxY/standard air hammers - one tool does both jobs. Standard and MaxY posts can be installed on the same pass.
- The locking-blade design enables the operator to prevent posts from twisting when being driven
- Running a top wire through our PR25 post racks is straightforward, as the Air Hammer Guide does not cover or foul the top wire.
- Tested on Whites/Waratah standard and Beefy/MaxY posts. Will also suit Clipex posts.
- We have used this product in the field and the efficiency gains are substantial, with no need to carry two air hammers or swap guides constantly. Used in conjunction with our air hammer lifter, it creates an easier fencing construction process with very low physical impact on the operator.
- Correct model Marchant Air Hammer: Picket Post Driver - 'Standard' code 1021 with 54mm Guide, 50mm Dolly.
Note: will not fit on air hammers older than approximately the year 2000
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING MULTI POST MARCHANT AIR HAMMER GUIDE

Hardwood Stakes. Bundle of 50.
Specifications:
Length: 100cm
Description: 12mm x 12mm unpointed
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FERNLAND 100CM - 12MM X 12MM - UNPOINTED (BUNDLE OF 50) HARDWOOD STAKES

Suitable for ROPS and CAB (optional). 

The Burder loader series are built to be tough, agile and performs well even under extensive usage.

The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.

Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.

BURDER 1.35M BURDER FRONT END LOADER (24-45 HP)

Series 08 - 8.63m Stump Jump Harrow System 4 Point Pull (2 Piece bars & master bar) - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8110 - 10 sections 8.63m (28ft 4in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 8.63m (28ft 4in)
- Weight 593kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 8.63M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

Suitable for CAB.

The Burder loader series are built to be tough, agile and performs well even under extensive usage.

The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.

Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.

BURDER 2.1M BURDER FRONT END LOADER (150-200 HP)

Farm Aid disc hillers are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction, they are built to serve and built to last!
Model:
FA800 13in with 1 1/4in round shank (Bare)
Bed maker assemblies and components also available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID 13IN DISC HILLER WITH SHANK ONLY - BARE - FARM AID - FA800

Stabiliser Arm Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX STABILISER ARM PIN - 19MM PIN DIA, 42MM PIN LENGTH

This handy gadget stores and transports water (for places where a hose will not reach).
It is simple, practical and flexible to use. Includes an anti-slip mat for the wheelbarrow. 80L.
Great for watering trees, building sites, and equestrian events.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF 80L WHEELBARROW BLADDER

Good quality moulded and stitched brown leather pouches for pocket knives. Belt loop and brass dome.
Dimension is maximum suitable closed-knife length.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF 10CM KNIFE POUCH MOULDED

Find Farm Machinery For Sale. Browse 7653 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SPENCO TOP LINK LOCKING COLLAR - M36 METRIC

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

DIGGA SLASHER 3PT LINKAGE-1500MM WIDE- TWIN BLADE- SL-000103

WALTERS FENCING MULTI POST MARCHANT AIR HAMMER GUIDE

FERNLAND 100CM - 12MM X 12MM - UNPOINTED (BUNDLE OF 50) HARDWOOD STAKES

BURDER 1.35M BURDER FRONT END LOADER (24-45 HP)

MURRAY 8.63M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

BURDER 2.1M BURDER FRONT END LOADER (150-200 HP)

FARM-AID 13IN DISC HILLER WITH SHANK ONLY - BARE - FARM AID - FA800

SPAREX STABILISER ARM PIN - 19MM PIN DIA, 42MM PIN LENGTH

SHOOF 80L WHEELBARROW BLADDER

SHOOF 10CM KNIFE POUCH MOULDED

Farm Supplies Machinery & Equipment

Dealer Address