Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

FEL Hydraulic Drive Sweeper - 2200mm
Specifications:
Working Width: 2200mm
Overall Width: 2525mm
Broom Dia: 600mm
Flow LPM: 60 Min 100 Max
Pressure Bar: 180
HP: 90+
Weight: 380kg
Mount: Quick Change
Hydraulic Angle: Std
Features:
HD Poly propylene Brush
Front is standard with 2 circuit to Front Remotes
Rear is standard with 2 circuits to rear remotes
Front Mount is Standard Burder or Euro Quick change is also availabe.
Colour choice at no extra charge - Standard Colour Burder Charcoal
Options:
Single wheel
Twin wheel
Hose kit to rear remotes
12V splitter diverter system
Manual angle option (price deducted)
PTO Driven pump and tank system including 2 bank valve for moor control and angle control
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER FEL HYDRAULIC DRIVE SWEEPER - 2.2M (90+ HP)

This Poly-propylene line strainer features a compact size that is well suited for small agricultural sprayers.
Available in 12.5mm (this model) or ¾ mounting facilities and a choice of 50 (this model), 80 or 100 mesh elements.
Maximum pressure rating is 10 Bar / 150 psi.
Colour = Blue
Mounts = 1/2" (12.5 mm)
Flow Rate up to 45 L/min
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1/2" LINE STRAINER (50 MESH)

This model is for telehandler to Custom implement.
Heavy Duty Quick Change Burder Style - Suits 5-6 tonne wheel loader/telehandler. Optional quick change hooks for implementing, hydraulic upgrade, sandwich plates, and mounts listed below.
Options:
- Heavy Duty Burder Quick Change Hooks for Implementing (weld on)
- Hydraulic upgrade (Hydraulic Pin Lock upgrade - requires 3rd function)
Options: Sandwich Plates:
- Telehandler to -
Telehandler Pin on
Euro Pin on
Burder Pin on
Challenge Aus Pin on
- Spring Handle Upgrade
Options: Mounts:
- Manitou
- JCB
- New Holland
- Merlo
- Massey Ferguson
- Claas Scorpion
- Volvo
- Custom/Other
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER 5-6 TONNE HEAVY DUTY QUICK CHANGE (SUITS CUSTOM IMPLEMENT)

Fenceline spray with adjustable 360 degree nozzle direction, creates big size drops for low product drift.
Suitable For: Herbicides, Insecticides, Fungicides, Fertilizers
Specifications:
Nozzle holder: Adjustable nozzle direction 360 degrees; Material: Polyethylene with Viton diaphragm; An extra course or ultra course droplet size can be achieved with the yellow nozzle to assist in drift reduction; Manual shut off valve and non drip nozzle body.
Nozzle: Supplied with AOC02; Other sized nozzles available - AOC025, AOC03, AOC04 and AOC05; ISO 10625 standard comply with colour and flow rate coding; Horizontal spray for fence line spraying
Spray Angle: 80 degrees
Working pressure: 2 + 20 Bar
Maximum Pressure: 15 Bar
Features:
- Ideal for fenceline spraying, firebreaks etc
- connects to both 1/2" BSP male and female spray bars
- adjustable spray direction 360 degrees
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN SPRAYBOOM FENCELINE KIT (360 DEGREE NOZZLE, TWIN PACK) SUITS L99, RP1-10 & RP1-33

Half mask respirator kit with P2 filters (meets AS / NZS 1715-16)
Features:
- soft silicone face seal
- downward outflow prevent eyewear fogging
- supplied with P2 particulate filter
- optional A1 filter for organic vapors (meets AS / NZS 1715-16)
- A1 & P2 filters can be combined for A1P2 protection
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN HALF MASK RESPIRATOR KIT WITH P2 FILTERS

Hose I.D.: 12mm
Flexible PVC reinforced spray hose ideally suited for high pressure applications.
Maximum working pressure 4000kPa (568 psi).
(Available per meter).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 12MM I.D. PROFESSIONAL DELIVERY HOSE (AVAILABLE PER METER)

BP3-0504 5/16 Hose Barb 1/4 BSP
Hose Barb to Suit Udder Gun.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

REGA UDDER GUN - PARTS - 4 INCH ADAPTOR - REGA - BP3-0504

Ideally suited to any machine fitted with 24 volt DC system eg. bulldozers, trucks and road sweepers.
Available in 11.3 L/min, 3 bar / 45 psi open flow with On/Off demand pressure switch.
Features:
Santoprene valve material
Santoprene diaphragm material
On/Off demand Pressure switch
Intermittent duty rating
1/2 BSP Male ports
Pump Size 11.3 L/min
Pressure Rate 3.1 bar 45 psi
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 24 VOLT SHURFLO DC PUMP - 11.3L/MIN - SILVAN - 361-2088-474-144

Murray 1200 x 800mm DIY Welding Table - Series 72.
The Hugh Murray Welding Tables jig / fixture table is a much needed design change from your typical fabrication table. The removable centre plate allows you to get into those hard to reach spots without having to relocate yourself and your equipment every time you need to adjust your position. The removable plate makes short work of those arduous welding tasks and can accommodate even the most complex welding projects.
The other major design change is on the under side of the table; the installation of the legs is made easy and precise by designing the leg adapter plates in such a way that the legs will run perfectly square and weld directly to the table, this makes assembly of the legs a quick and easy task with no time wasting. This table is designed to only accept 50x50mm square hollow section (SHS) as legs because it is a very common SHS dimension and can be found at every steel supplier. This is so that the customer can choose the height of their table to suit their needs, rather than a one-size-fits-all approach.
Please note that the legs are not included.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1200 X 800MM DIY WELDING TABLE - SERIES 72

2.79m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3303 - 2.79m (9ft 2in) - 4/9 Tine - 38kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Specifications:
Tank Size= 180 L
Pump Size = 50 LPM
Length = 820 mm
Width = 620 mm
Height = 670 mm
Weight = 29 kg
Features:
- UV Stabilised diesel grade polyethylene Polytuff tank
- Strong Thick-walled lockable cover that protects the entire transfer station from weather conditions (2 keys supplied)
- Tie down strap recesses under the cover in each corner
- Yellow covers have become synonymous with diesel fuel containers, due to a high flashpoint
- 4m wiring harness with alligator clips
- 12V 50 L/min Selecta power open flow pump (Factory tested)
- Forklift access (when empty)
- Water filter keeps your engine running efficiently by removing contaminants from the fuel
- 100mm Filling cap with breather
- Tank Level indicator
- High quality auto shut off trigger that mounts at the front of the tank and has the provision to padlock it
- 4m of ¾ delivery hose with swivel and factory fitted crimped fittings
Selecta DieselCubes are the next generation in design and strength with tanks that are thicker, stronger & more robust.
Not only are they visually appealing, all DieselCubes have a water lter connected to the pump to assist in reducing damage to your diesel engine. Specically designed for well body vehicles such as the Ram, Ford Ranger, Toyota Hilux, BT-50, Triton, Nissan Navara, Isuzi D-Max, and VW Amarok.
The height of the DieselCubes make diesel transfer effortless in these vehicles.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 180L DIESEL CUBE TRANSFER UNIT

Find Farm Machinery For Sale. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

BURDER FEL HYDRAULIC DRIVE SWEEPER - 2.2M (90+ HP)

SILVAN 1/2" LINE STRAINER (50 MESH)

BURDER TELEHANDLER 5-6 TONNE HEAVY DUTY QUICK CHANGE (SUITS CUSTOM IMPLEMENT)

SILVAN SPRAYBOOM FENCELINE KIT (360 DEGREE NOZZLE, TWIN PACK) SUITS L99, RP1-10 & RP1-33

SILVAN HALF MASK RESPIRATOR KIT WITH P2 FILTERS

SILVAN 12MM I.D. PROFESSIONAL DELIVERY HOSE (AVAILABLE PER METER)

REGA UDDER GUN - PARTS - 4 INCH ADAPTOR - REGA - BP3-0504

SILVAN 24 VOLT SHURFLO DC PUMP - 11.3L/MIN - SILVAN - 361-2088-474-144

MURRAY 1200 X 800MM DIY WELDING TABLE - SERIES 72

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

SILVAN 180L DIESEL CUBE TRANSFER UNIT

Farm Supplies Machinery & Equipment

Dealer Address