Farm Supplies Machinery & Equipment

Micro Pressure Switch to suit 382-168 pump - Max Pressure 60psi
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN MICRO PRESSURE SWITCH TO SUIT 382-168

Specifications:
Connection Type: Linkage
Weight: 104kg
Height / Width / Length (mm): 930 / 1100 / 1100
Capacity: 400L
Width of Throw: 6-14m
Key Features:
Construction: Heavy duty construction for long service life. The hopper is manufactured from non-corrosive UV stabilised impact resistant polyethylene. The frame is made of galvanised, high strength tubular steel. Spout formed from fibreglass reinforced nylon.
Drive Line: Quality PTO driveshaft with approved safety cover. Continuous stroke flywheel with spring loaded drive coupling. Oscillating mechanism operates in oil bath for long service life.
Height Control: Single lever control for adjusting spreading volumes. Two spouts supplied for banding. Long agitator supplied as standard.
The oscillating spreader is designed for precise application of fertiliser and seed at medium to low rates. The oscillating spout will apply product accurately from 5 to 14 metres depending on material being spread as well as left or right hand banding. Spreader is supplied with spouts for banded spreading for either 3 metre or 7 metre wide rows. (Note: Banded spreading will still allow some product to spread in centre)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400 LITRE OSCILLATING SPREADER -RON-SQTF400

Transfers up to 19 Litres per minute. Safely siphons water, fuels, insecticides, paints, solvents and thick oil.
Directions:
- insert copper nozzle into container and briskly move up and down to begin flow
- transfers up to 19L/min
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN COPPER JIGGLER SIPHON

A Smooth Rust Resistant Capping.
Looking for a smooth finish for your RHS? Our square post caps will stop water getting in and corroding your RHS posts.
Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. Its that simple.
Each galvabond square post cap is made from mild steel to ensure a long lasting and strong cap.
Each cap has little ridges on the inside, which means once the cap is on, it wont come off.
What is A Galvabond Finish?
Wondering what a galvabond finish is? What's the difference between a galvanised cap versus a galvabond cap?
A galvanised product, is when the product is made then hot dipped galvanised.
A galvabond cap is created when we get a pre-galvanised sheet and punch the cap out. This creates a lot smoother finish, yet still remains corrosion resistant.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 125mm square
- Galvabond
Features:
- Smooth finish
- Won't come off
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 125MM SQUARE POST CAP - PC125

This will help to prevent algae growing in your water.
Features:
- Made in Australia of superior materials
- Covers with moulded knock-outs which can be removed as required
- Flexible and UV stabilised to withstand the elements
- UV Blocker lid prevents algae growth by stopping sunlight.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS STRAINER DUST COVER FOR RTS002

Powertech Honda Concrete Screed (1.2m blade included)
The Powertech Honda Concrete Screed produces high-quality screeding much faster than traditional screeding methods. Commercial grade and built to improve operator comfort and efficiency, incorporating handle vibration isolators for reduced vibration transfer, a fully adjustable twin handle system for easy height adjustment, and a sturdy tilt stand for straightforward re-fuelling and storage.
Specifications
Engine: Honda GX35 4-stroke engine.
Power: 1.2kw @ 7000rpm 1,9Nm @ 5500rpm
Low vibration
Commercial grade unit
Tilt stand
Single-piece cast connection to the engine
Adjustable handle for different height levels
Multiple blade options available - 1.2m, 1.8m, 2.4m, 3.0m, 3.7m & 4.9m
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POWERTECH HONDA POWER CONCRETE SCREED

Heavy duty strength at a light duty price.
Features:
Fitted with high tensile 50mm main pivot pin to minimise wear and tear and avoid breakage.
24 angle positions to both right and left allowing blade to work outside the tractor wheel, even at an angle.
Blade rotates 360 degrees allowing forwards and backwards operation.
Adequate tilt via the linkage pin position and tractor levelling box.
Curved 10mm thick mouldboard for strong cuts at the correct angle and high clearance for greater capacity.
Hardened, reversible cutting edges (as used on road graders).
Optional Holden depth wheel (at additional cost) with either manual ratchet or hydraulic adjustment.
Available in 6ft (1.8m), 7ft (2.1m) and 8ft (2.4m) widths.
12 Month Warranty against faulty materials or workmanship.
Specifications
Cutting Edge Width: 6ft (1.8m)
Mouldboard Thickness: 10mm
Mouldboard Height: 500mm
No Offset Positions: 8
No Angle Positions: 24
Tractor HP: 40-100
Category-3 Point Linkage: Cat 1/2
Weight: 370kg
Also available:
0036 7ft Grader Blade HD Model
0035 6ft Grader Blade HD Model
Options:
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HEAVY DUTY GRADER BLADE 8FT (2.4M) - 0037, SUIT 40-100HP

Australian Made to suit the harsh Australian environment
Weighing 13.5kg for the CHPD52 and 15.5kg for the CHPD78, both models are lightweight and portable but still able to drive posts as swiftly as much larger and heavier hydraulic and pneumatic tools.
The high impact hammer action of 1720BPM will drive steel fence pickets into the hardest ground in a matter of seconds and the portable design allows operators to move along a fence line with ease. The driver uses an efficient Honda GX35 4-stroke motor to give the best service life possible.
The CHPD52 (this model) has a 52mm receiver guide tube which allows most standard posts and pipe up to 50mm diameter, as well as timber 35mm square to be driven, while the CHPD78 (next size model) has a redesigned lower hammer section to allow much larger posts and pipe to be driven right up to 75mm diameter without any other adapters.
Blows Per Minute - 1720
Joules - 26
KW - 1.0 (1.3hp) at 7,000 rpm, 4-stroke, overhead cam Trigger throttle with integrated stop button, Spring isolated hand grips
Fuel Consumption - 0.71 L/h at 7,000 rpm. Meets strictest worldwide emission and noise requirements
Starting System - recoil (pull start)
Rating - Continuous use on standard posts
Weight - 13.5kg
Engine Warranty - 3 Year genuine Honda warranty
Post Driver Warranty - 12 months parts failure
Noise Level - 100dB Hearing protection required
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE

CHRISTIE CHPD52 - 52MM POST DRIVER

Series 38 Manual winch folding wing frame with 4 section folding S44 Stump Jump Harrow. 3.45m coverage. Transport width: 2.82m.
Please note that 3 point linkage pins are not supplied.
Murray Series 38 Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 38 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 3.45M MANUAL FOLDING FRAME STUMP JUMP HARROW

Red Handle Hitch Pin with Chain & Linch Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX RED HANDLE HITCH PIN WITH CHAIN & LINCH PIN (3/4" PIN DIA, 165.1MM WORKING LENGTH)

900mm 4 Series Auger (Heavy conditions - (MFT) Multi Facet Tungsten-Hard Ground) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger, drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 900MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

This Halo Retrofit Kit suits Digga models PD25 - PD50, PDT25 - PDT50 Auger Drives made after 2007. They are suitable for excavators and skid steer loaders.
What is Halo?
Halo is an alignment system located in the hood ring of the auger drive, which provides an operator with a simultaneous clear line of sight to itself, as well as the hole being dug. Halo utilises a band of LED lights, which when fully illuminated green, indicate the drive is plumb.
The Retrofit Kit includes a new hood with halo ring, hood box, 3M cable & cigarette plug.
Options - Extension Cables:
EC-001292 - Halo 1m extension cable
EC-001293 - Halo 3m extension cable
EC-001294 - Halo 6m extension cable
Options - Battery:
EC-001301 - Halo battery kit. Includes battery with zero function, and 1m cable
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA HALO RETROFIT KIT (SUITS PD25 - PD50, PDT25 - PDT50)

Find Farm Machinery For Sale. Browse 7535 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN MICRO PRESSURE SWITCH TO SUIT 382-168

SILVAN 400 LITRE OSCILLATING SPREADER -RON-SQTF400

SILVAN COPPER JIGGLER SIPHON

ROTECH RURAL 125MM SQUARE POST CAP - PC125

RAPID PLAS STRAINER DUST COVER FOR RTS002

POWERTECH HONDA POWER CONCRETE SCREED

JOHN BERENDS HEAVY DUTY GRADER BLADE 8FT (2.4M) - 0037, SUIT 40-100HP

CHRISTIE CHPD52 - 52MM POST DRIVER

MURRAY 3.45M MANUAL FOLDING FRAME STUMP JUMP HARROW

SPAREX RED HANDLE HITCH PIN WITH CHAIN & LINCH PIN (3/4" PIN DIA, 165.1MM WORKING LENGTH)

DIGGA 900MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

DIGGA HALO RETROFIT KIT (SUITS PD25 - PD50, PDT25 - PDT50)

Farm Supplies Machinery & Equipment

Dealer Address