Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60-130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

Bulk Bag Lifter. 1,200kg rated capacity. Suits Fork, Burder, Standard & Euro Hitches
Options:
- Lifting tabs (no extra charge)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1,200KG BULK BAG LIFTER

Diaphragm pumps are built for 540 RPM operation, are Self-priming and designed so no special tools are required for service.
Tough and reliable they will run dry without risk of damage.
All pumps are supplied with appropriate hose connections, mounting base plates and six splined shaft.
Some models are available with keyed shaft.
Specifications:
Pump Size: 124 L/min
Pressure Rate: 20 bar
3 diaphragms
Max Pressure: 20 bar / 290 psi
Height / Width / Depth: 270mm / 283mm / 242mm
Product Weight: 13 Kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN BP130/20 DIAPHRAGM PUMP (124 LPM)

ARS Longnose Fruit Snip - 46mm blade.
Ideal for nursery & propagating use with non-slip lightweight grips that fit comfortably into the hand.
The black finished high-carbon steel blades are marquench hardened for durable cutting performance.
Length: 190mm, blade length: 46mm, weight: 110g
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ARS LONGNOSE FRUIT SNIP - 46MM BLADE

This Rainwater Tank is 5,000L and comes with the Household Water System (Submersible Pump and Mains Water Changeover Kit) to make your life easier.
Dimensions:
Capacity : 5,000 L
Length: 3,290 mm
Width: 1,020 mm
Height : 2,010 mm
Features:
- Space-saving modern design, ideal for tight spaces
- Hand grips for easy lifting
- Can be coupled to other tanks for even greater volume
- Available with submersible pump, packaged pump unit or garden pump systems
- Available in 22 Colorbond colours
Standard Fit Out:
Strainer Position: 6 o'clock
Outlet Position: 6 o'clock
Overflow Position: 12 o'clock
Strainer Size: 400 mm
Outlet: 25mm (brass)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 5,000L RAINWATER TANK & HOUSEHOLD PUMP (SLIMLINE)

Features:
100HP two speed gearbox (540 RPM).
Phased rotors 200mm pitch.
Head stock centre mounted.
Leveling bar standard.
Floating side shields.
2060mm working width.
80 270mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF100-200CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 60-100 HP
No. of Blades: 20
Working Width (mm): 2060
Product Weight (kg): 700
Total Width (mm): 2150
MF100-200PR Specifications (with Packer Roller):
Connection Type: Linkage
Min PTO HP: 60-100 HP
No. of Blades: 20
Working Width (mm): 2060
Product Weight (kg): 780
Total Width (mm): 2150
Factory Options:
Stone Collar Protection
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI MEKFARMER 100 POWER HARROWS 2.06M - BREVIGLIERI - MF100-200CR, MIN 60-100 HP

Counterweights are important in maintaining the stability of the tractor when using front end loaders. With a front end loader fitted onto a tractor, the centre of gravity shifts forward. The centre of gravity is further amplified when the loader lifts a load thus putting pressure on the tyres, axle and rims.
To eliminate such risks, a 3 point linkage should be used. The counterweight is hooked up with a 3 point linkage set behind the rear axle. This is the best method to improve stability and it reduces the amount of pressure placed on the tyres, axle and rims.
Specifications:
Capacity: 400kg
Fill: Concrete
Shape: Bevel
Category: Cat 1
LxWxH: 600 x 375 x 600
Features:
- Robust design
- Australian steel
- Steel casing and concrete filled
- Quality 2 pack paint
Safe & User Friendly:
- Engineered for maximum safety and efficiency
- Simple to use
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 400KG CONCRETE COUNTER WEIGHT (3PL)

This trap has two extremely fast trap or snap doors and is ideal for safe and animal friendly trapping of stray cats and other animals.
Due to the central bait door, the bait is easily placed above the step plate. Robust due to hot-dip galvanised mesh with super strong 3.3mm wire and reinforced frame. Handle for secure transport. Protect your home and garden the animal-friendly way.
Dimensions 118cm x 33cm x 42cm.
Note: these traps are best used without bait.
To use, place trap in likely place - a hole in a fence, or similar. The animal to be trapped can see a clear path right through the trap. The mesh floor of the trap allows grass or vegetation to grow up through, thus disguising the trap. The top handle allows safe removal of trap with animal inside.
Trap can also be used with bait if required, but is not actually designed for this.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF 118CM DOUBLE-ENTRY KERBL TRAP

Pear Linch Pin 2 PCS.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PEAR LINCH PIN (2 PCS. AGRIPAK) (12MM PIN DIA, 52MM TOTAL LENGTH)

400MM 4 Series Auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD -HYDRAULIC DRIVE

ARS Hoof Trimming Shear - 200mm
- 215mm long
- Weight: 150g
- Blade length: 58mm
Features:
- This model is similar to the 130DX but with long straight blades.
- Multipurpose shear ideal for hoof trimming and pruning of thin stems, leaves and grasses.
- Marquench hardening gives the blades the best steel structure and durable cutting performance.
- Razor sharp, hard-chrome plated blades for rust and sap resistance.
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ARS HOOF TRIMMING SHEAR - 200MM

300MM 4 Series auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 300MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Find Farm Machinery For Sale. Browse 7532 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

BURDER 1,200KG BULK BAG LIFTER

SILVAN BP130/20 DIAPHRAGM PUMP (124 LPM)

ARS LONGNOSE FRUIT SNIP - 46MM BLADE

POLYMASTER 5,000L RAINWATER TANK & HOUSEHOLD PUMP (SLIMLINE)

BREVIGLIERI MEKFARMER 100 POWER HARROWS 2.06M - BREVIGLIERI - MF100-200CR, MIN 60-100 HP

BURDER 400KG CONCRETE COUNTER WEIGHT (3PL)

SHOOF 118CM DOUBLE-ENTRY KERBL TRAP

SPAREX PEAR LINCH PIN (2 PCS. AGRIPAK) (12MM PIN DIA, 52MM TOTAL LENGTH)

DIGGA 400MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD -HYDRAULIC DRIVE

ARS HOOF TRIMMING SHEAR - 200MM

DIGGA 300MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Farm Supplies Machinery & Equipment

Dealer Address