Farm Supplies Machinery & Equipment

Underground Rainwater Tanks give you the maximum capacity for the minimum square meterage used.
Out of sight with the smallest footprint in the industry.
Dimensions : 2,470 L x 1,640 W x 1,665 H
Capacity : 3,300 L
Filter Features:
- Self cleaning captures more than 90% of water while cleaning your filter as well
- Withstands up to 30 tonnes of vehicle weight
- Extension risers available for deeper underground installation
- Vortex Filter for roof area up to 200 square metres with 100mm pipe entry
- Fully tested polyethylene tank designed to withstand ground and water pressure at depth.
- Engineered by geotechnical experts including Finite Element - Analysis (FEA). These calculations are provided with the tanks.
- Sealed locking tamper-proof lid.
- Anti-flotation design and engineering specifications completed to AS1170.
- Certified to AS/NZS 4766 Rainwater tank standard
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 3,300L UNDERGROUND TANK INC VORTEX FILTER

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2190kg
No of bearings: 12
No of axles: 6
Cutting width: 3.2m (10ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

Specifications are shown in images.
The PF1500 medium capacity pallet forks built to make life on a construction site that bit easier.
Material handling around a construction site demands a great deal of flexibility. Heavy duty construction, the precision mounting plate and various other ingenious features make our Pallet Fork attachment for the skid steer loader a must have item. The ideal solution for locations where pallet handling is needed but the site is unmade or too rough for a forklift truck. The PF1500 can hold a weight capacity of 1,500kg.
Features:
- Fully adjustable Tines with locking pins.
- Tines are fixed at the top and heel preventing bouncing while carrying loads.
- Sidestep for easy entry and exit of the cab.
- High visibility brick guard giving you good vision whilst loading and unloading - crucial in a safety conscious age.
- Auger Torque pallet fork tines are manufactured to ISO2328:2011 / AS2359.11-1995 and ISO2330:2002 / AS2359.14:2005 standards
- Auger Torque fork mounting frames are engineered and tested for strength and longevity
- Can be disassembled and packed into a compact storage space when not in use.
Options:
- Standard or Euro hook
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE 1,500KG PALLET FORKS (107CM TINES)

The TBE Series mulchers are heavy duty offset machines with parallelogram arm ideal for council and contractor use in maintaining roadsides, parks and gardens. The TBE has a double skin and rounded Hardox steel skids for increased durability. Height control is maintained by a roller with removable ends for servicing.
For grass and green pruning's up to 50mm diameter. Low profile body, double skin & no opening tailboard. PTO drive shaft with durable safety cover, heavy duty oil bath gearbox, taper locked pulleys and electronically balanced rotor.
Hydraulic swing arm offset with spring loaded break away. 65 degrees below horizontal to 90 degrees vertical Inclination adjustment.
Cat. II three point linkage floating top link.
Specifications:
Height Control: Roller (standard fitment).
Connection Type: Linkage
Min PTO HP: 80-130 HP
PTO rpm: 540
Rotor rpm: 2205
Hammers: 20
Working Width (mm): 1900
Product Weight (kg): 925
Dimensions WxDxH (mm): 1979 x 768 x 1222
Options:
Y Blades: 40
Y Blades with Straight: 40Y with 20S
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI TBE OFFSET MULCHERS 1.9M - TBE192/06- 80-130HP

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils .
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
Product Specifications
Aerate, Renovate and Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate and Renovate 2.5 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate and Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate and Renovate 7.5 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle. On this setting the aervator is very aggressive. Again use weight. This setting is best used after previous passes and will fracture any compaction layer. If used on hard ground the tines will probably not penetrate very far.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 1600 AERATORS - DOUBLE ROTOR - 0173

Toyota 5SDK5 side shift trencher frame to suit MT range.
Auger Torque has several hitch & frame options to suit your particular machine, need and application.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE TOYOTA 5SDK5 SIDE SHIFT TRENCHER FRAME TO SUIT MT RANGE

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
7 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 7'9" (2.3M) - 0183

Features:
120 HP multi speed gearbox with rear PTO (540 RPM).
2540mm working width.
60 x L blades total.
Side gear drive.
CE safety guards.
Floating front hitches.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Model Code: B123V-250
Connection Type: Linkage
Min Tractor PTO HP: 70-120 HP
Working Width (mm): 2540
Working Depth (mm): 100-250
Product Weight (kg): 820
Total Width (mm): 2730
Specifications with Optional Cage Roller
Product Weight (kg): 970
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 2.54M B123 ROTARY HOE (MIN 70-120HP)

Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
Suit Hose Size of 12.5 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN BARBED TEE PIECE (SUIT 12.5 MM HOSE)

Ideal for spot spraying - and for fitting to utilities, UTV, trucks and trailers sizes include 300, 400 and 600 (this sprayer) Litre tank capacities.
Available with remote control hose reels and a range of engine driven Silvan diaphragm pumps.
(Please note in field image is of the single reel only)
Specifications:
Tank Size (L): 600
Pump Size (L/min): 38
Max Pressure: 40 Bar / 580 psi
Product Weight (kg): 275
Height / Width / Length (mm): 750 / 1850 / 1200
Features:
- available in 300L, 400L (baffled) and 600L; fitted to galvanised skid
- Australian made remote control hose reel
- Honda engine and comet APS41 pump
- 38 L/min (open flow) 40 Bar / 580 psi max pressure
- 100m smoothline hose and turbo 400 spray gun
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 600L REMOTE CONTROL SKID SPRAYER (TWIN REEL)

Pressure Switch to suit 381-125 pump - Max Pressure 35 psi
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN PRESSURE SWITCH TO SUIT 381-125

O.D = 1 "
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1" O-RING (O.D)

Find Farm Machinery For Sale. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

POLYMASTER 3,300L UNDERGROUND TANK INC VORTEX FILTER

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

AUGER TORQUE 1,500KG PALLET FORKS (107CM TINES)

NOBILI TBE OFFSET MULCHERS 1.9M - TBE192/06- 80-130HP

JOHN BERENDS GROWMASTER 1600 AERATORS - DOUBLE ROTOR - 0173

AUGER TORQUE TOYOTA 5SDK5 SIDE SHIFT TRENCHER FRAME TO SUIT MT RANGE

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 7'9" (2.3M) - 0183

BREVIGLIERI 2.54M B123 ROTARY HOE (MIN 70-120HP)

SILVAN BARBED TEE PIECE (SUIT 12.5 MM HOSE)

SILVAN 600L REMOTE CONTROL SKID SPRAYER (TWIN REEL)

SILVAN PRESSURE SWITCH TO SUIT 381-125

SILVAN 1" O-RING (O.D)

Farm Supplies Machinery & Equipment

Dealer Address