Farm Supplies Machinery & Equipment

375MM 4 Series Auger (Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 375MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Diaphragm pumps are built for 540 RPM operation, are Self-priming and designed so no special tools are required for service.
Tough and reliable they will run dry without risk of damage.
All pumps are supplied with appropriate hose connections, mounting base plates and 1 3/8" six splined shaft.
Some models are available with keyed shaft.
Specifications:
Pump Size: 58 L/min
Pressure Rate: 20 bar
2 diaphragms
Max Pressure: 20 bar / 290 psi
3.3hp required at max pressure
Height / Width / Depth: 280mm / 276mm / 258mm
Product Weight: 10 Kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN BP60/20 DIAPHRAGM PUMP

3" Ny-glass through tank fitting L/H thread
Plastic tank outlets:
Left-hand threaded lock nut for secure fitting
Suitable for use with potable water and a wide range of liquids
Corrugated tank outlets:
Poly outlets have corrugated gaskets for fitting through tank walls
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 3" NY-GLASS THROUGH TANK FITTING L/H THREAD

4 in 1 Bucket 8000 series - 1.50m. Includes Log Teeth as standard.
The 4 in 1 bucket has many advantages over the standard bucket including...
- Allows the operator to open the bucket to release material instead of dumping the material.
- When the bucket is opened, the exposed blades on the rear and front end of the bucket can be used for earthmoving activities.
- Allows the clamping of objects and is ideal for picking items like broken branches.
Specifications:
- Width (m): 1.50m
- HP Range: 50-100
- Struck Capacity (m3): 0.31
- Rated Capacity (m3): 0.39
- Dimensions LxWxH (mm): 1560 x 730 x 720
- Weight (kg): 400
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 4 IN 1 BUCKET 8000 SERIES 1.50M - 50-100HP RANGE - INCLUDES LOG TEETH

Rechargeable Cordless Tyre Inflator with LED light and USB Power bank function. Inflate Tyres on Cars, Side by sides & ATVS, Motorcycles & Scooters, Bicycles, Sporting balls and more.
Approximately 6 min for 195/55R15 Tyre.
Number of inflations per charge approximately 2.5
Length = 180 mm
Width = 45 mm
Height = 70 mm
Weight = 0.55 kg
Battery - 1500mAh Li Ion Battery, 90W Power
Max Pressure = 150 psi
Charging - USB Type C charging Port 5V/1A
Light - LED Light with RED light safety strobe
Settings - Settable pressure with automatic stop
5 Pressure Operating modes: Car, Motorcycle, Bicycle, Balls, Max with adjustable pressure settings, stopping automatically
Cordless and corded 12V dual use
Inclusions - Tidy bag, USBC Charging cable, 12V Operating Cable with Cigarette plug, range of accessory connectors.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN TYRE INFLATOR INC LED LIGHT (12V RECHARGEABLE)

Series 38 Manual winch rigid frame with 3 section rigid S08 Stump Jump Harrow. 3.45m. Transport width: 3.57m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 3.45M (4 SECTION) RIGID FRAME STUMP JUMP HARROW

Features:
100 HP multi speed gearbox (540 RPM).
1570mm working width.
36 L blades total.
Side gear drive.
CE safety guards.
Rear door with spring & pin adjustment.
Floating front hitches.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 50-100 HP
Working Width (mm): 1570
Working Depth (mm): 100-250
Product Weight (kg): 590
Total Width (mm): 1760
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.57M B103 ROTARY HOE (MIN 50-100HP)

Heavy duty slashers designed for tough conditions.
Features:
- Fitted with solid rubber tyres. Puncture proofing is available.
- Twin rotors fitted to two 75HP end gearboxes and connected by an extra heavy 110HP centre gearbox. Two-plate slip clutch between each gearbox provides gearbox protection.
- Contra rotating rotors form a flat windrow behind the centre of the slasher, however, two small windrows can be created by reversing the direction of the rotors.
- Front and rear chains can be fitted on request.
- Full 12 month warranty against faulty materials or workmanship.
Specifications:
3PL
Cutting width 3.5m
Weight 975kg
Width (overall) 3.72m
Body construction: 5mm top, 6mm sides
Tractor HP range 70HP+
PTO Series 7 Shaft
Gearbox/PTO speed 540rpm
Centre Gearbox 110HP
End Gearboxes 75HP
Gearboxes Protection 2 Plate Slip Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

The coil tines are 30mm square, and are used for primary and secondary cultivation.
They are ideal where deep penetration is required without bringing subsoil up to the surface. They are commonly used in market garden operations to penetrate beneath the normal level of cultivation.
The coil allows the tine to move, assisting penetration and reducing horsepower needed. Coil tines do not disturb the surface as much as the wider chisel plough tines. This is useful in operations as pasture renovation and plough or rotary hoe pan breaking.
The finer tine is also good for secondary cultivation where a heavy machine is needed for heavy soils. Overall width of the machine is 9 wider than the cut width ie: 5 tine is 5 9, 7 tine is 7' 9' and so on.
Features
The frame is 100 x 100 x 6mm, similar to the rigid chisel plough
Cat 1 & 2 Linkage
Extra tines can be fitted if required to reduce tine spacing
30mm square high resistance hardened double coil tines.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings
Horsepower requirements vary widely but 8-10 HP per tine is a rough guide
Excellent underframe trash clearance of 520mm
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18)
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS COIL TINE CHISEL PLOUGHS 11 TINES - 0208

The Nobili rear mount BKE series of mulchers are a multi-purpose machine ideal for pasture topping with the option of side shift suited to tractors up to 100HP with cutting height maintained by adjustable skids.
Suggested Use: Grass mowing and green pruning's up to 50mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Control: Two position fixed headstock
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids
Specifications:
Connection Type: Linkage
Tractor HP: 75-100 HP
PTO RPM: 540
Rotor RPM: 2205
Y Blades: 56
Working Width (mm): 2496
Weight (KG): 710
Dimensions WxHxD (MM): 2712W 550H 1222D
Options:
Full Width Roller
Wear Plate
Semi Swivel Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BKE PASTURE MULCHERS 2.5M - BKE250/01-F Y FLAILS- SUIT 75-100HP

Easy to use. Strong. Rust proof.
Looking for a strong D-shackle for heavy lifting and towing? Our load rated D-shackles are perfect for supporting a heavy load.
Our shackles are perfect for heavy lifting and static systems where a reliable strong D-shackle is needed.
Each load rated screw pin shackle comes with a galvanised steel body and yellow screw pin.
They can be used the same as regular D-shackles however, the rating means you know how much load they will safely be able to handle.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 10+ & 20+.
Specifications:
- 16mm shackle O.D
- 19mm pin O.D
- 27mm internal width
- 3.2 tonne working load limit
Features:
- Extremely strong
- Easy to use
- Rust resistant
How To Choose A D-SHACKLE
A D-shackle is a great option if you want to attach your chain to other objects. However, you will want to make sure you pick the right D-shackle for your chain.
When choosing a D-shackle, you will need to find out the inside width of the chain link. The pin of the D-shackle will need to be smaller than this width in order for it to fit through your chain link.
To find the inside width of the chain, simply subtract 2x the chain link diameter from the total width. For example, here is how you would calculate the inside width of an 8mm chain:
27mm (width) 2 x 8mm (diameter) = 11mm (inside width)
In this example, the inside width of an 8mm chain is 11mm. This means you would want to get a D-shackle with a pin diameter (Ø) of 10mm or less. (An 11mm pin might be too tight a fit).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 16MM LOAD RATED D-SHACKLES (W.L.L 3.2T) -DS16R

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Alternative holes for the lower linkage arms, provide ample tilt for V-draining.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 4ft
Mouldboard Thickness: 6mm
Mouldboard Height: 350mm
Tractor HP: 16-35
Weight: 101kg
Options:
0001 Grader Blade Wheel Kit
0418 Boxed ends suit Standard model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STANDARD DUTY GRADER BLADES 4FT (1.2M) - 0002, SUIT 16-35HP

Find Farm Machinery For Sale. Browse 7532 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

DIGGA 375MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

SILVAN BP60/20 DIAPHRAGM PUMP

RAPID PLAS 3" NY-GLASS THROUGH TANK FITTING L/H THREAD

BURDER 4 IN 1 BUCKET 8000 SERIES 1.50M - 50-100HP RANGE - INCLUDES LOG TEETH

SILVAN TYRE INFLATOR INC LED LIGHT (12V RECHARGEABLE)

MURRAY 3.45M (4 SECTION) RIGID FRAME STUMP JUMP HARROW

BREVIGLIERI 1.57M B103 ROTARY HOE (MIN 50-100HP)

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

JOHN BERENDS COIL TINE CHISEL PLOUGHS 11 TINES - 0208

NOBILI BKE PASTURE MULCHERS 2.5M - BKE250/01-F Y FLAILS- SUIT 75-100HP

ROTECH RURAL 16MM LOAD RATED D-SHACKLES (W.L.L 3.2T) -DS16R

JOHN BERENDS STANDARD DUTY GRADER BLADES 4FT (1.2M) - 0002, SUIT 16-35HP

Farm Supplies Machinery & Equipment

Dealer Address