Farm Supplies Machinery & Equipment

This heavy duty professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive bleed for displaced roller towards the back, starting from model 2016.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

Power Harrow Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX POWER HARROW BLADE - 60 X 12 X 335MM (LH)

Daken DKHO170 Rotary Hoe. 1.7M
Daken Rotary hoes are equipped with maintenance free oil bath transmission and a laser balanced blade rotor.
Blades are spring steel and can be easily replaced and sharpened.
Gearbox is heavy duty with internal overrun. Fitted with adjustable rear flap.
Specifications:
- Rotor speed: 210RPM
- No of blades: 36
- Blades: Curved
- Transmission: Chain, Oil Bath
- Weight kg: 260
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN ROTARY HOE 1.7M -36 BLADES (MAX 40HP)

Battioni Long Life Rebuild Kit.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BATTIONI LONG LIFE REBUILD KIT (SUITS MEC11000 P, D, H & M)

Short Fruit Snip - 170mm.
Handy and light-weight snips for harvesting and florist work. This blade is limited to 20mm to avoid injury during harvesting.
Handles are made of polyamid with 30% glass fibre.
A plastic holster is included.
Cutting capacity 5mm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BAHCO SHORT FRUIT SNIP - 170MM

Cultivator - 3 Row 190
Cultivators are a secondary tillage product, for preparing seedbeds, and controlling weeds.
3 and 4 row models available with heavy duty S tines set up with trash flow pattern.
With the addition of a Bracket a Daken C Seeder can be mounted making it a simple but effective sowing device.
Features:
- Strong rugged construction
- Trash flow tine pattern
- Suits Cat 1 & 2
- C seeder bracket supplied
- 12mm heavy duty S tines
- 3 and 4 rows
- Suitable to have C Seeder mounted
- Tines mounted approx. every 300mm
- 2 Year Warranty
- Weight: 186kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CULTIVATOR MODEL 3 ROW 190 GALVANIZED - 03019DC

The hydraulically shiftable MU-FM/S rear and side mulcher, which can operate both to the side and the rear behind the tractor, is a genuine all rounder.
Its operating range is variable from 90° upwards to 60° downwards hydraulically adjustable. Its large swivelling range of 112 cm means that the mulcher is ideal for working on roadside greenery, dykes, ditches and hedges.
The MU-FM/S is designed for tractors of up to approx. 45hp
Features:
The MU-FM/S is designed for tractors of up to approx. 45 HP and one of its outstanding features is the well established Müthing mechanical safety breakaway system. This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
The mulcher is of course also equipped with the M-Carbide shackle flails and the patented Shark fin" shredding bar system and possesses all the positive mowing and mulching characteristics of the MU-FM.
This produces optimum mowing and mulching and an even spread of the mulch on the surface resulting in a rapid and perfect rotting composting on the surface.
Brilliant in combination with a front mounted mulcher provided appropriate engine power is available.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Hood Wear Plate (factory mounted).
Second Patented removable shredding bar system: "Shark Fin".
Working hours meter with electronic sensor.
Model:
MU-FM/S 120 1200mm 45 HP WW 1200mm Weight 340kg Flails 20
MU-FM/S 140 1400mm 45 HP WW 1400mm Weight 353kg Flails 24
MU-FM/S 160 1600mm 45 HP WW 1600mm Weight 370kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-FM/S 160 MULCHER (MECHANICAL SAFETY BREAKAWAY)

This 7kVA Generator is the perfect size for almost everything, with 2 x 15 amp outlets, and Honda Australia Approved GX390 engine, this generator will run your power tools, small compressor, and much much more.
Searching for a tough, economical generator for around the farm or jobsite? Your search stops here. This workhorse combines the reliability and power of a Honda engine with the durability of a Gentech design. The Honda GX390 engine delivers more power, quieter performance and lower fuel consumption. The result is 7 kVA portable power suitable for hand tools and small to medium work appliances. A good size for drills, smaller welders, saws, pressure washers, small to medium pumps etc.
With fuel economy of 2.6 litres per hour, the 6.5 litre fuel tank delivers 2.5hours of operation at 80% load. A recoil start, double 15 Amp outlet panel and great optional accessories complete the package. This generator is the real deal for farming and trade use; backed by a national service support netowrk.
The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 4 year warranty.
Specifications:
Power Rating: 7 kVA
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.60 L/hr
Operation Hours @ 80% Load: 2.50 hrs
Fuel Type: Petrol
Diam.: 735 x 545 x 525 mm (L x W x H)
Weight: 75 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA PETROL GENERATOR (240V ENGINE POWERED)

Gate Valve Head specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX GATE VALVE HEAD 6"

Key Features:
- Bare tanks require a steel frame for mounting
- Strong UV stabilised polyethylene Lightweight, strong construction
- Impact resistant
- Spill proof lid 122mm diameter
- Chemical resistance
- Calibrated volume sight lines
- Smooth easy to clean interior surface
- Baffled tank
Specifications:
Tank Size 800 litres
Height / Width / Depth: 760mm / 940mm / 1,800mm
Weight: 59 kg
Selecta Polytuff Diesel tanks are constructed for the toughest Australian conditions. Manufactured with a unique diesel grade polyethylene that is UV stabilised and impact resistant.
Ideal for agriculture, industrial and speciality applications.
Each tank is a product of careful testing and manufacture to ensure a strong, durable and maintenance free tank ideal for years of service in harsh Australian conditions.
A wide range of Polytuff tanks in assorted shapes and sizes. Sizes range from 20 to 2200 litres.
They are available in free standing or in bare formats. Free standing tanks are easily mounted onto truck trays, trailers or utilities.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 800L DIESELPAK TANK

Specifications:
Tank Size= 250 L
Pump Size = 50 LPM
Length = 930 mm
Width = 750 mm
Height = 770 mm
Weight = 34 kg
Features:
- UV Stabilised diesel grade polyethylene Polytuff tank
- Strong Thick-walled lockable cover that protects the entire transfer station from weather conditions (2 keys supplied)
- Tie down strap recesses under the cover in each corner
- Yellow covers have become synonymous with diesel fuel containers, due to a high flashpoint
- 4m wiring harness with alligator clips
- 12V 50 L/min Selecta power open flow pump (Factory tested)
- Forklift access (when empty)
- Water filter keeps your engine running efficiently by removing contaminants from the fuel
- 100mm Filling cap with breather
- Tank Level indicator
- High quality auto shut off trigger that mounts at the front of the tank and has the provision to padlock it
- 4m of ¾ delivery hose with swivel and factory fitted crimped fittings
Selecta DieselCubes are the next generation in design and strength with tanks that are thicker, stronger & more robust.
Not only are they visually appealing, all DieselCubes have a water lter connected to the pump to assist in reducing damage to your diesel engine. Specically designed for well body vehicles such as the Ram, Ford Ranger, Toyota Hilux, BT-50, Triton, Nissan Navara, Isuzi D-Max, and VW Amarok.
The height of the DieselCubes make diesel transfer effortless in these vehicles.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 250L DIESEL CUBE TRANSFER UNIT

Top Link Ball End.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO TOP LINK BALL END (CAT 2) - 1 1/4" UNC, 170MM THREAD LENGTH

Find Farm Machinery For Sale. Browse 7636 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

SPAREX POWER HARROW BLADE - 60 X 12 X 335MM (LH)

DAKEN ROTARY HOE 1.7M -36 BLADES (MAX 40HP)

BATTIONI LONG LIFE REBUILD KIT (SUITS MEC11000 P, D, H & M)

BAHCO SHORT FRUIT SNIP - 170MM

DAKEN CULTIVATOR MODEL 3 ROW 190 GALVANIZED - 03019DC

MUTHING MU-FM/S 160 MULCHER (MECHANICAL SAFETY BREAKAWAY)

GENTECH 7 KVA PETROL GENERATOR (240V ENGINE POWERED)

SPAREX GATE VALVE HEAD 6"

SILVAN 800L DIESELPAK TANK

SILVAN 250L DIESEL CUBE TRANSFER UNIT

SPENCO TOP LINK BALL END (CAT 2) - 1 1/4" UNC, 170MM THREAD LENGTH

Farm Supplies Machinery & Equipment

Dealer Address