Farm Supplies Machinery & Equipment

Ideal for weed control, spot & fence line spraying applications, the Smoothflo series deliver constant flow, no pulsation and the highest pressure for distance spraying. Suitable for use on quad bikes, side by side utes, trays & trailers, with UV stabilised Polytuff tanks to ensure long life.
Specifications:
Tank Size: 100 litres
Pump Size: 7 L/min
Height/Width/Depth: 395mm / 475mm / 800mm
Product Weight: 10 KG
Features:
UV stabilised Polytuff tank suitable for agricultural chemical spraying.
7 L/min open flow (690 kPa/120 psi) Smoothflo Pump (DDP-552), Viton valves and Santoprene diaphragm ON/OFF Switch.
6 metres of 8mm delivery hose.
Quality Spotjet spray gun with adjustable spray nozzle.
3 metre wiring harness with in line fuse and alligator clips.
No pressure regulator required to deliver constant flow without pulsation.
Options:
474-196 - Brass 1/4" Female x 3/8" hose barb (2 required)
187-MH05 - SS hose clamp 6-16mm (2 required)
RP1-34 - boomless nozzle towbar boom
RP1-20 - 1.5m towbar boom
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 100L SMOOTHFLO SPOTPAK SPRAYER - 12V

Ideal where exact measurements are required.
Both standard and dual pressure gauges for high and low pressure readings.
Feature a nominal size 100mm gauge, clear lens, glycerine filled, 1/2" BSP male thread in either bottom or back entry models.
Features:
Entry type: back
Pressure limit: 0-60 Bar
Optimum operating pressure: 30 bar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 100MM FACE, BACK ENTRY TYPE (0-60 BAR PRESSURE LIMIT) PRESSURE GAUGE

Serious lifestyle block owners & orchardists need look no further. Simply hitch this chipper to your 540 RPM PTO and you have a machine that has the same capabilities as its engine powered equivalent. Maintenance is effortless with simple access to the blades. Suitable for any small tractor from 17 45HP.
The Hansa C13 PTO is powered by your tractor for easy mulching in and around your property. Ideal for domestic and commercial use on acreage, farms and orchards popular with gardeners, hire companies, landscapers, groundskeepers and contractors.
The Hansa C13 PTO easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.
Features:
Heavy duty blades
Solid-steel casing
Adjustable output chute
Twin belt drive
Minimal cleaning and maintenance required
Technical Specifications:
Chipping capacity: 90mm
Dimensions: H1500mm x W900mm x L1100mm
Weight: 177kg
Horsepower required: 17hp 45hp
PTO rpm: 540rpm 640rpm
Knives: 200mm x 58mm x 7mm A8 modified tool steel Heat treated and ground all over.
Anvil: Case hardened, reversible
Disc speed: 2000rpm
Disc size: 565mm x 12mm
Pulleys: 2 x cast iron
Belts: 2 x V belts B55
Bearings: 2 x self-aligning ball bearings
Infeed throat opening (intake chute): 190mm x 190mm
Tractor linkage: 3 point cat 1
Finish: Powder coated
Warranty: Chipper one year domestic warranty
Optional Add-Ons and Spare Parts:
C13 270 degree Swivel Outlet
C13 Blades
C13 Anvil
C13 Belts
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HANSA C13 WOOD CHIPPER, PTO DRIVEN, 90MM CHIPPING CAPACITY

Made in Australia. Suitable for many applications, from tree watering to fire-fighting and much more.
Features:
- Quality trusted pump Loncin powered Miniblaze pump
- 166 LPM @ zero head
- Easily attach to any flat surface such as a ute tray provision for strap or pin mounting
- Wear pads allow airflow and protect ute tray
- Integrally mounted pump saves tray space
- Adjustable nozzle with 12m of hose as standard
- Versatile and lightweight
Dimensions: 1,050 L x 750 W x 600 H
Capacity: 200 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 200L FIRE FIGHTING UNIT (2.5HP PUMP)

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1970kg
No of bearings: 12
No of axles: 6
Cutting width: 2.74m (9ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 26 INCH 6MM SCALLOP DISCS - 0871, SUIT 75-165HP

A versatile implement that every tractor should have. Transport hay bales, fence posts, firewood, tools, fertilizer, spray tanks and much more, wherever you go.

JOHN BERENDS 4FT X 3FT CARRYALLS (METAL FLOOR) - 0162

Mundial is a well known brand of knives manufactured in Brazil. The company was established in Brazil before WWII by a German knife manufacturer.
Handles are polypropylene, which can be boiled, and blades are of high-carbon stainless steel, which is easy to sharpen whilst being resistant to rust.
These are mid-range knives. Quality at a reasonable price.
Dimensions are blade length only.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNDIAL 25CM (10") BUTCHER LARGE KNIFE

CBM Levelling Box Assembly.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CBM LEVELLING BOX ASSEMBLY (824MM MIN ADJUST)

Series 08 - 6.90m Stump Jump Harrow System 4 Point Pull (2 Piece bars & master bar) - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8108 - 8 sections 6.90m (22ft 8in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 6.90m (22ft 8in)
- Weight 452kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 6.90M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

Top Grabs for Standard Bucket 6000 series - 1.65m.
Price is for grabs only does not include bucket.
Two Grab types available:
Profile Cut Grabs:
The top grab for bucket is an additional feature that makes picking objects off the ground easier.
Activating the hydraulic cylinder for the grab will result in a grabbing action.
Forges Tines Grabs:
The tines on the top grab can be easily removed if replacement tines are needed. With the added grab with tines, transporting loose silage is much easier.
Specifications:
- Width (m): 1.65m
- HP Range: 40-60
- Struck Capacity (m3): 0.27
- Rated Capacity (m3): 0.34
- Dimensions LxWxH (mm): 1710 x 690 x 560
- Weight (kg): 145
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TOP GRAB FOR BUCKET STANDARD 6000 SERIES 1.65M - 40-60 HP RANGE

Serious lifestyle block owners & landscape gardeners need look no further. This chippers easy engagement system, along with its efficient self-feeding action removes all the hard work. Maintenance is effortless with easy access to the blades.
The C13 comes in three versions standard with optional drawbar (C13), or mounted on a road trailer (C13 RT), or powered by your tractor (C13 PTO).
Ideal for domestic and commercial use on acreage, parks and around farms by gardeners, hire companies, landscapers, groundskeepers and contractors. The C13 is very popular with orchard, olive and winery owners as well.
The Hansa C13 easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.
Features:
GX390 Honda petrol engine (electric start option available)
Easy start
Heavy duty blades
Pneumatic wheels for easy maneuvering by hand
Solid-steel casing
Twin belt drive
Adjustable output chute
Similar noise output to a domestic mower
Minimal cleaning and maintenance required
On registration engine four years warranty, chipper two years domestic warranty
Technical Specifications:
Max. chipping capacity: 90mm
Engine: Honda GX390
Max Power: 13HP
Fuel tank size: 6L
Starting system: Recoil
Inlet chute size: 170 x 220mm
Qty of knives: 2
Knife size: 200 x 58 x 10mm
Knife material: A8 modified tool steel
Cutting disk dimensions: 560 x 12mm
Cutting disk weight: 36kg
Cutting disk speed: 2000RPM
Beltdrive: Twin
Self-feeding: Yes
Wheels: 400mm pneumatic
Dimensions: L1100 x W1000 x H1400mm
Weight: 265kg
Outlet chute height: 1120mm
Outlet chute type: Deflector
Optional Add-Ons and Spare Parts:
C13 Electric Start
C13 270 degree Swivel Outlet
C13 Blades
C13 Anvil
C13 Belts
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.
Related Products

HANSA C13 ROAD TRAILER WOOD CHIPPER - HANSA - C13RT- 90MM CHIPPING CAPACITY

Dimensions : 1,650 DIA x 600 H
Capacity : 1,000 L
Features;
- Very strong, robust design
- Easy to service
- New 75 mm bung great cleaning
- Drain cap at very base of trough, so max. amount of water will empty out when draining
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 1,000L ROUND WATER TROUGH

Find Farm Machinery For Sale. Browse 7535 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 100L SMOOTHFLO SPOTPAK SPRAYER - 12V

SILVAN 100MM FACE, BACK ENTRY TYPE (0-60 BAR PRESSURE LIMIT) PRESSURE GAUGE

HANSA C13 WOOD CHIPPER, PTO DRIVEN, 90MM CHIPPING CAPACITY

POLYMASTER 200L FIRE FIGHTING UNIT (2.5HP PUMP)

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 26 INCH 6MM SCALLOP DISCS - 0871, SUIT 75-165HP

JOHN BERENDS 4FT X 3FT CARRYALLS (METAL FLOOR) - 0162

MUNDIAL 25CM (10") BUTCHER LARGE KNIFE

CBM LEVELLING BOX ASSEMBLY (824MM MIN ADJUST)

MURRAY 6.90M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

BURDER TOP GRAB FOR BUCKET STANDARD 6000 SERIES 1.65M - 40-60 HP RANGE

HANSA C13 ROAD TRAILER WOOD CHIPPER - HANSA - C13RT- 90MM CHIPPING CAPACITY

POLYMASTER 1,000L ROUND WATER TROUGH

Farm Supplies Machinery & Equipment

Dealer Address