Farm Supplies Machinery & Equipment

3,000L Paddock Pak. BP130/20 pump, 3 section electric valve controls, 18m boom.
Specifications:
Tank Size (L): 3,000
Connection Type: Trailed
Pump Size (L/min): 132
Features:
Pump: Silvan self-priming oil backed diaphragm pump. BP130/20: 132 L/min. capacity 2000kPa pressure.
Boom: Hydraulic lift, fold and tilt with parallel arm boom suspension, nitrogen accumulator and spring-loaded breakbacks. Galvanised boom with stainless steel spraylines. Minimum 3 sets of hydraulic remotes required.
Controls: 3 section Silvamatic electric controls with pressure compensating direct acting valves. In cab on/off & pressure adjustment with pressure gauge.
Tank: Polytuff impact resistant polyethylene construction with calibrated sight line & non-spill screw down lid.
Flush Tank: 100L
Frame: Galvanised RHS steel construction with adjustable drawbar and operator platform.
Agitation: 2 stage agitation. Bypass action and Venturi agitation.
Filtration: Lid strainer, suction line filter.
Wheel Equipment: 2m track axle with 14.9 x 24" lug tyre
Bottom Fill: Bottom fill valve with camlock coupling.
Options:
- BP200/20 pump, 195 L/min. capacity, 2000kPa pressure
- Hydraulic drive centrifugal pump
- 5 section Silvamatic electric controls (in lieu)
- Bravo 180S automatic rate controller (in lieu)
- Bravo 180S automatic rate controller to suit hydraulic control (in lieu)
- Bravo 400S automatic rate controller with GPS guidance (in lieu)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console)
- Mudguards (to suit 14.9 x 24 wheels)
- Adjustable track axle (minimum 1500mm) with 11.2 x 44 Lug tyres (2500L only)
- 57L Paddock Foam Marker
- Venturi suction probe
- Silmix Chemical Hopper
- 3 Section electric over hydraulic control
- 5 Section electric over hydraulic control
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L PADDOCK PAK TRAILED SPRAYER (18M BOOM)

Easy to use. Strong. Rust proof.
Looking for a strong D-shackle for heavy lifting and towing? Our load rated D-shackles are perfect for supporting a heavy load.
Our shackles are perfect for heavy lifting and static systems where a reliable strong D-shackle is needed.
Each load rated screw pin shackle comes with a galvanised steel body and yellow screw pin.
They can be used the same as regular D-shackles however, the rating means you know how much load they will safely be able to handle.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 10+ & 20+.
Contact dealer for bulk pricing.
Specifications:
- 8mm shackle O.D
- 10mm pin O.D
- 13mm internal width
- 750kg working load limit
Features:
- Extremely strong
- Easy to use
- Rust resistant
How To Choose A D-SHACKLE
A D-shackle is a great option if you want to attach your chain to other objects. However, you will want to make sure you pick the right D-shackle for your chain.
When choosing a D-shackle, you will need to find out the inside width of the chain link. The pin of the D-shackle will need to be smaller than this width in order for it to fit through your chain link.
To find the inside width of the chain, simply subtract 2x the chain link diameter from the total width. For example, here is how you would calculate the inside width of an 8mm chain:
27mm (width) 2 x 8mm (diameter) = 11mm (inside width)
In this example, the inside width of an 8mm chain is 11mm. This means you would want to get a D-shackle with a pin diameter (Ø) of 10mm or less. (An 11mm pin might be too tight a fit).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 8MM LOAD RATED D-SHACKLES (W.L.L 750KG) -DS08R

Versatile & Strong.
Need a heavy duty top saddle to complete your farm gate hinge set? Our top saddles are perfect for a variety of rural applications.
Each top saddle is made from galvanised steel for a long last and strong saddle. The product can easily be welded or screwed to a timber post.
The 25NB top saddle is also available for round posts. Instead of the standard flat backing, we have curved it for a smoother fit.
Price quoted is for one saddle only.
Discounts apply for bulk purchases of 10+
Specifications:
- 32NB gate
- 1 x top saddle to fit SA32 Saddle attachment
- Galvanised
Features:
- Strong
- Versatile
- Easy to install
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL TOP SADDLE FOR SA32 ATTACHMENT 32NB - TS32HD

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils .
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 1200 AERATORS - SINGLE ROTOR - 0163

Built for rugged Australian conditions using top quality components. Horsepower requirements of 40-90HP. Available in 5ft (1.5m) to 6ft6in (2.0m) sizes.
A slasher manufactured for rugged Australian conditions, heavily built using top quality components to give you the best value for money obtainable.
Features:
One piece body made from 6mm quality steel. Excellent underframe clearance clears cut material quickly.
Bondioli & Pavesi Series 5 pto driveshaft with 2 plate slip clutch protects slasher and tractor.
75 HP oil lubricated gearbox. Optional Italian manufactured gearbox upgrade. Excellent seal guards make it virtually impossible for wire to damage the gearbox.
Cat 1/2 linkage.
Hardened and tempered straight/stepped bushed slasher blades.
Floating headstock for working on undulating ground.
Optional solid rubber wheelkits and rollers available for depth control.
Standard with front and rear chain guards.
Document holder supplied.
Optional galvanising available.
Full 12 month warranty on design and manufacture.
Specifications:
Dual Mount
Cutting Width 1750mm
Overall Width 1900mm
Overall Length 1880mm
Tractor HP 50-90
Cutting Height 25-100mm
Weight 420kg
Options:
1590UG Italian Manufactured 75HP Gearbox Upgrade
0095 Heavy Duty Slasher Wheel Kit (Pneumatic Wheel)
0081GAL HD153 Slasher with Galvanised Deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HD180 SLASHERS 1.8M - 0081- 50-90HP

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 4130kg
No. of Bearings: 24
No. of axles: 12
Cutting width: 5.71m (18ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 26 INCH DISCS - 0965

Brass 3/4 inch adjustable fire fighting nozzle.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY BRASS 3/4 INCH ADJUSTABLE FIRE FIGHTING NOZZLE

The Twist-Tight post and stay connectors have been designed specifically for the demands of farm fences, not lighter duty applications like security fences.
A high tensile (8.8) M12 bolt secures the tongue and clamp onto the post. A bolt is secure, unlike a pre-drilled hole.
The 6mm thick tongue goes 125mm down inside the stay, this significantly increases the strength and effectiveness.
The Twist-Tight clamp allows for adjustment at any time, unlike alternative options, where the stay has been welded or inserted into pre-drilled holes.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 20+, 40+ or 100+.
Features:
- No drilling
- No welding
- Adjustable
- Easy Install
- Fast install
- Strong
- Anti-bruise
Specifications:
- 150NB post
- 40NB (48mm O.D) stay
- Medium stay section
- 3.2mm stay wall thickness
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL TWIST-TIGHT POST & STAY CONNECTORS 150NB X 40NB (MEDIUM) - PSC15040M

Fault finding made easy, saving you time and money!
Read fence voltage, fence current and the direction of a fault.
Now with added safety with no cords, waterproofing and a belt clip.
The Daken Power Probe takes the guess work out of fault finding on your electric fence.
Features:
- Tests voltage up to 9.9kv
- Reads Fault Direction
- Reads strength of load
- Large LCD display
- Well insulated
- Water resistant
- Economical
- Takes a 9volt battery
- Standard 12 month warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

DAKEN DIGITAL POWER PROBE 2 ELECTRIC FENCE TESTER - 73040D

5 Bar Gate - 1500mm. (5ft)
All gates are manufactured from 25NB pipe and are a standard 1170mm high.
Features:
- Perfect as a strong livestock gate
- Available in widths from a 1000mm (3'3") personnel gate to a 4800mm (16') farm gate
- Increased vertical bracing in gates 2400mm (8') and over in length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS 5 BAR GATE - 1500MM (5FT)

Long lasting, versatile steel chain. Looking for strong rust-proof chain? Our galvanised chain will suit any use you can think off. From securing a yard, to cleaning up around the farm, there is little our chain cant do.
Looking for a versatile and long lasting chain for use on your farm? Our galvanised chain is made from quality steel to ensure a strong chain.
Whatever your needs, we have the right size for you;
- Our 3mm and 4mm chain is great for dog chains.
- Our 5mm, 6mm and 8mm chain is perfect for securing your gates and stockyards.
- Maybe you need something heavier to clean up around the farm? Our heavy duty 10mm and 13mm chain is perfect for heavier jobs.
No matter your requirements, we can help.
Price quoted is for one item.
Specifications:
- 13mm chain
- 46 X 65mm link size (WXH)
- 25kg/bucket
- 7m Approx
- Galvanised
Features:
- Strong & long lasting
- Versatile
- Range of sized
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 13MM GALVANISED CHAIN - 25KG (7M) - GC1325

Machine Suitability:
- Skid Steer Loaders & Excavators (5 - 7.5 Tonne)
Features:
- Oil Pressure Range: 180-240 bar
- Oil Flow Range: 70-115 lpm
- Unit Width: 1,018mm
- Unit Height: 808mm
- Unit Length: 2,262mm
- Cutting width range: 150-300mm
Please select the frame / hitch and chain suited to your machine and application (listed below in options).
All MT trenchers include Flat Face Couplers and Hydraulic Hoses.
Universal Frame Options (to suit XHD range):
- Universal side shift heavy duty
Hitches Options (to suit XHD range):
- 40mm PIN
- 1 3/4" PIN
- 45mm PIN
- 50mm PIN
- 55mm PIN
- 60mm PIN
- 65mm PIN
900mm Trenching Depth Chains (to suit XHD range):
- 150mm x 900mm - Earth
- 150mm x 900mm - Combination
- 150mm x 900mm - Tungsten
- 200mm x 900mm - Earth
- 200mm x 900mm - Combination
- 200mm x 900mm - Tungsten
- 250mm x 900mm - Earth
- 250mm x 900mm - Combination
- 250mm x 900mm - Tungsten
- 300mm x 900mm - Earth
- 300mm x 900mm - Combination
- 300mm x 900mm - Tungsten
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE XHD1200 TRENCHER 4K

Find Farm Machinery For Sale. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 3,000L PADDOCK PAK TRAILED SPRAYER (18M BOOM)

ROTECH RURAL 8MM LOAD RATED D-SHACKLES (W.L.L 750KG) -DS08R

ROTECH RURAL TOP SADDLE FOR SA32 ATTACHMENT 32NB - TS32HD

JOHN BERENDS GROWMASTER 1200 AERATORS - SINGLE ROTOR - 0163

JOHN BERENDS HD180 SLASHERS 1.8M - 0081- 50-90HP

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 26 INCH DISCS - 0965

RAPID SPRAY BRASS 3/4 INCH ADJUSTABLE FIRE FIGHTING NOZZLE

ROTECH RURAL TWIST-TIGHT POST & STAY CONNECTORS 150NB X 40NB (MEDIUM) - PSC15040M

DAKEN DIGITAL POWER PROBE 2 ELECTRIC FENCE TESTER - 73040D

LEMPRET WIRE & SEALANTS 5 BAR GATE - 1500MM (5FT)

ROTECH RURAL 13MM GALVANISED CHAIN - 25KG (7M) - GC1325

AUGER TORQUE XHD1200 TRENCHER 4K

Farm Supplies Machinery & Equipment

Dealer Address