Farm Supplies Machinery & Equipment

Pressure regulator kits are an ideal accessory that allow the operator to adjust the pressure.
This is ideal to achieve an accurate application rate whether used in a spot spraying application through a spraygun, a boomless nozzle or a sprayboom.
Whilst allowing the excess flow produced by the pump back into the tank for agitation.
1/2" BSP Male
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 5D (19MM) PRESSURE REGULATOR

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Can be offset in seconds to work outside the tractor wheel to the left or right hand side. Choice of 5 positions each way to a maximum of 600mm offset.
Alternative holes for the lower linkage arms, provide ample tilt for v-draining.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 6ft
Mouldboard Thickness: 6mm
Mouldboard Height: 350mm
Tractor HP: 20-50
No. offset positions: 9
Weight: 180kg
Options:
0009 Grader Blade Wheel Kit
0418 Boxed ends suit Standard model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STANDARD OFFSET GRADER BLADES 6FT (1.8M) - 0003, SUIT 20-50HP

Storz fitting kit for fire fighting / wash down pump kits.
Features:
- 2 x 1 inch outlet fittings, 1 x 1 inch x 19mm tail to hose reel, 1 x 1 1/2 inch suction fitting, 1 x 1 1/2 inch discharge fitting, 2 x 1 1/2 inch x 38mm tail for suction & bottom fill, 1 x 1 inch cap for spare outlet, 1 x 1/2 inch cap for discharge.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY STORZ FITTING KIT FOR FIRE FIGHTING / WASH DOWN PUMP KITS

BIGHORN Forged 10 Tine Mulch Fork with Steel D-Handle

Robust forged wide head fork ideal for shifting large volumes of mulch, woodchips and other landscape works. Fitted with a strong and durable steel D-handle.
Features: 
- The steel handle is slightly longer than other similar forks for increased comfort (less bending)
- Head/tine depth: 420mm, width: 380mm, nominal handle diameter 36mm
- Weight 3.4kg, overall length: 1,240mm, handle length: 820mm
-The head is forged in Austria. The handle and fork is made and assembled in Japan.

BIGHORN FORGED 10 TINE MULCH FORK WITH STEEL D-HANDLE

Pour-on lice control for off-shears treatment of sheep. Effective against pyrethroid-susceptible strains of Damilinia ovis.
Contains Cypermethrin. Must be applied within 24 hours of shearing.
Dosage: Approx 1ml per 5kg of body weight. Refer to label for exact rates.
Withholding period: Do not use less than 3 days before slaughter for human consumption.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WSD 5L BACK-PACK SPURT LICE CONTROL (POUR ON)

1 1/2" Brass Through Tank Fitting with 1 1/4" Internal Thread
Features:
- Outlets up to 2" have male and female threads
- 1 1/2 outlets and bigger have a left-hand threaded lock nut for secure fitting. Does not unscrew when attaching valves
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 1 1/2" BRASS THROUGH TANK FITTING WITH 1 1/4" INTERNAL THREAD

The stump jump chisel plough is an ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard.
Features:
11 Tines at 12 adjustable spacings.
Heavy Duty 75x75x6mm Frame.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Horsepower requirement is approximately 8-10 HP per tine.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
Depth Wheels (Pair Holden)
10x8mm Dart Point
16x8mm Sweep
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 11'9" (3.5M) WIDTH - 0198

Hitch Pin with Chain & Linch Pin (25mm x 157mm).
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SPAREX 25 X 157MM HITCH PIN WITH CHAIN & LINCH PIN

Rigid box construction rotary hoes suitable for ground preparation on small farms and market gardens.
Features:
40 HP single speed gearbox.
850mm working width.
Side chain drive with auto tensioner.
16 x C blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 15-40 HP
Working Width (mm): 850
Working Depth (mm): 50-150
Product Weight (kg): 155
Total Width (mm): 990
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 0.85M B40F ROTARY HOE (MIN 15-40HP)

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
11 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 11'9" (3.5M) - 0185

Working Width = 2 - 12 m
Capacity = 2.3 m3
Weight = 1,180 kg
Min HP = 30 hp
Topdressing is critical to breakdown those thatch layers, thereby improving drainage and creating conditions favourable for strong grass growth. Do it with precision, with the GKB SPM.
This version of the Sandspreader comes with an additional material handler a front mounted elevator for the convenient topping up of bunkers, trenches or other routine topdressing around the golf course. Quality build for a quality operation
The SPM is constructed using high quality steel to give you long-lasting reliability. It is also highly adjustable, making it ideal for light, frequent dressings or heavier applications. It also comes with a standard overrun brake and LED lighting as standard. The SPM is available with three different hopper capacities, all of which can be connected to your tractor with a drawbar.
All trailed models in the GKB Sandspreader range come with pivoting axels as standard. It is also highly adjustable, making it ideal for light, frequent dressings or heavier applications.
The conveyor belt speed can be altered to suit the desired depth of dressing, while the hydraulically driven discs offer optimal accuracy. It also comes with a standard overrun brake and LED lighting as standard.
Optional Extras:
SPM00.09.01 - Trench Filling Unit SPM (Suits all models)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GKB MACHINES 2.3 M3 SAND SPREADER INC CONVEYOR (30+ HP)

High Flow Regulator
- Made from nylon and aluminium
- Gauge port 1/4
- Excellent chemical resistance
- Chatter free, responsive pressure control
- Available with 3/4 connections
- Sturdy high flow regulator
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN HIGH FLOW REGULATOR - 8460 SERIES

Find Farm Machinery For Sale. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 5D (19MM) PRESSURE REGULATOR

JOHN BERENDS STANDARD OFFSET GRADER BLADES 6FT (1.8M) - 0003, SUIT 20-50HP

RAPID SPRAY STORZ FITTING KIT FOR FIRE FIGHTING / WASH DOWN PUMP KITS

BIGHORN FORGED 10 TINE MULCH FORK WITH STEEL D-HANDLE

WSD 5L BACK-PACK SPURT LICE CONTROL (POUR ON)

RAPID PLAS 1 1/2" BRASS THROUGH TANK FITTING WITH 1 1/4" INTERNAL THREAD

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 11'9" (3.5M) WIDTH - 0198

SPAREX 25 X 157MM HITCH PIN WITH CHAIN & LINCH PIN

BREVIGLIERI 0.85M B40F ROTARY HOE (MIN 15-40HP)

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 11'9" (3.5M) - 0185

GKB MACHINES 2.3 M3 SAND SPREADER INC CONVEYOR (30+ HP)

SILVAN HIGH FLOW REGULATOR - 8460 SERIES

Farm Supplies Machinery & Equipment

Dealer Address