Farm Supplies Machinery & Equipment

Shakti pump with lead KIT -B1.
These small peripheral pumps, despite their size, are capable of delivering high heads. The brass stamped turbine can handle high water temperatures and is great for pressure boosting. Rugged metal casing, stainless steel shafts and non corrosive internal make this a solid, small to medium domestic pump. These pumps are best used with a flooded suction.
Specifications:
Inlet / Outlet Size: 1" x 1" BSP
Power: 750W
Rating: 240v 1p
Poles: 2
Options:
KIT-MPC1 - Automatic pressure controller kit for single phase pumps with 1" outlet and with a motor up to 1,100 watt.
KIT-P15/18 - Pressure switch, Gauge and 18L steel tank kit for single phase pumps with 1" outlet and with a motor up to 1,100 watt.
Performance Data:
Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ÂºC.
- Flow rates up to 3.2m³/h.
- Heads up to 48m.
- Fluids must be clean and free from suspended abrasive particles.
- Maximum fluid temperature: +80ºC.
- Maximum ambient temperature: +40ºC.
- Rotational speed: 2900rpm.
Motor:
The driving motor is an asynchronous, closed squirrel cage type, with external ventilation.
- With in-built thermo-amperometric protection and capacitor.
- Class of insulation: F - service: S1.
- Degree of protection: IP55.
Installation:
The pump is to be installed in a horizontal position for both fixed and portable plants. These pumps must not be used in situations where there are long breaks between operation such as seasonal use in holiday homes etc, as minor internal corrosion can lead to a tendecy for the impeller to stick.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHAKTI 750W (1" X 1" BSP) PERIPHERAL PUMP WITH LEAD KIT

8.5 kVA portable generator powered by Kohler Diesel engine with Electric Start. Featuring 34 litre fuel tank, giving 13.0 hours of operation at 80% load.
Specifications:
Model Rating 0.8pf @ 50Hz: 8.5 kVA
Alternator Rating: 9.5 kVA
Engine Model: Kohler KD425
Engine Speed: 3000 rpm
Phase: 1-Phase
Engine Horsepower: 12.5 hp
Outlets: 2 x 15 Amp
Approx. Fuel Consumption @ 80% Load: 2.60 L/hr
Operation Hours @ 80% Load: 13.0 hr
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 8.5 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

Coulter Disc specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX COULTER DISC 18" (4 HOLES) - FISKARS

PTO Over-Running Clutch.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO OVER-RUNNING CLUTCH (U/J SIZE: 30, 2 X 79, 4MM) - CLOCKWISE

For front mounting vehicles without PTO, Müthing supplies the MU-FM/Hydro flail mulcher with a powerful hydraulic motor.
As the basic professional model of the MU-FM/Hydro has the same build as the MU-FM. It of course also possesses the same impressive operating and quality advantages as the MU-FM, comparable versatility and identical optional equipment.
The drive of this mulcher requires an oil volume of 45 L /min (LPM) at a pressure of about 180 bar up to a max of 70 LPM. This means that the MU-FM/Hydro can be used both on yard loaders and special hydro traction vehicles.
A large selection of mounting adapter plates for these vehicles simplifies mounting and optionally available hydraulic control blocks (spool) facilitates mounting onto vehicles hydraulic systems for oil volumes in excess of 48 LPM.
Features:
Manufactured from High Quality QSt/E Steel for front mounting for skid steering loaders.
Hydraulic drive for a volume flow from 45-75 LPM, with over run valve.
Belt protection with tension measuring slot.
Shackle M Carbide flails.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin
Roller with rounded edges to preserve the soil & turf and to carry the flail with variable height adjustment.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Hydraulic spool valves required: 1 x pressure flow, 1 x pressure less return flow (max. counter-pressure < 20 bar).
Hydraulic hoses without couplings.
Height Adjustable support wheels, 360 deg swivel in front of flail
Options:
Mounting plate for yard loaders (linkage parts to loader not included)
Mounting plate for yard loader Avant
Mounting plate for yard loader with EURO-3-socket
Mounting plate for yard loader Schaffer with old socket
Mounting plate for yard loader Schaffer with socket SWH
Mounting plate for yard Weidemann with hydraulic locking
Mounting plate with hydraulic side shift 700mm to the right not for a specific vehicle
Screw on socket for Avant, only in combination with MU-FMZ072
Screw on socket for EURO 3, only in combination with MU-FMZ072
Screw on socket for Schaffer old socket, only in combination with MU-FMZ072
Screw on socket for Schaffer SWH, only in combination with MU-FMZ072
Screw on socket for Weidemann with hydraulic locking, only in combination with MU-FMZ072
Hydraulic Comtrol Spool (for oil flow over 48L/Min) Headstock with A frame Cat. 0
Headstock with A triangle Cat. 1 N
Second Patented removable shredding bar system: "Shark Fin"
Hood wear plate (factory mounted)
Thatch blades
Vertically adjustable rear support wheels, 360 deg swivelling, instead of support roller ( only MU-FM Hyrdo 140-160) additional charge
Models:
MU-FM 120-Hydro WW 1200mm Overall width 1450mm Oil-slow 35-70 l/min Weight 201kg Flails 20
MU-FM 140-Hydro WW 1400mm Overall width 1650mm Oil-slow 45-70 l/min Weight 217kg Flails 24
MU-FM 160-Hydro WW 1600mm Overall width 1850mm Oil-slow 45-70 l/min Weight 232kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 160CM MULCHER WITH HYDRAULIC DRIVE - SUITS 45-70LPM - MU-FM160

Coupling with Hose End specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX COUPLING WITH HOSE END - MALE 6"

PTO Shaft.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO SHAFT - 1,310MM LZ LENGTH, 1 3/8" X 6 SPLINE Q.R. 1 3/8" X 6 SPLINE Q.R.

The 24V Solar Sliding Gate Opener is the ultimate in convenience and security. Featuring solar energy power, this opener offers superior performance with no need for a mains supply.
The robust construction and intuitive design make it easy to install and use, providing safe access control for all types of sliding fencing gates.
With adjustable force settings, you can tailor the operation to your specific needs, ensuring that your gate moves at exactly the speed you require it to.
It contains the following...
1 Motor Unit
1 Control Board
1 Receiver Board
2 Remote controls (additional remote controls can be purchased)
2 Batteries
2 Manual Release Keys
4 Metres Gear Rack
1 40-watt Solar panel. (Solar Panel Stand not included)
Technical Specifications
Power supply: 24V AC Transformer or 24V Solar
Starting current: < 4A
Gate moving speed: 12m/min
Gate Length: 5m (max)
Net weight: 15kg (including spare - parts)
Security Code Store:
The Sliding Gate Motor uses state of the art Microchip technology in storing your Slider Code Transmitter Security Code. Up to 20 different transmitters can be stored in the non-volatile memory device. To store any code simply press the LEARN button on the motor and press the transmitter button twice. The codes can be deleted at any time. Security is enhanced because the fixed and encrypted sections combined increase the number of combinations to 7.38 x 109. There is no Dip switch on the motor which can be visually seen and copied.
Open & Close Drive Button:
Another feature developed to aid in the installation of the Sliding Gate Motor is the O/S/C Button. This button is used to help set the open and close limit positions. A quicker time setting and a more precise limit position can be achieved using this system.
Auto Close Mode:
The Sliding Gate Motor can be programmed to automatically close at a selected period (eg. Thirty seconds) after the gate has opened. A photoelectric beam must be installed if this mode is selected.
Photo Electric Beam:
The Sliding Gate Motor has an input for a Photo-Electric Beam to be connected for extra safety protection. (This needed to be purchased separately with your sliding gate)
Optional accessories available include...
Wireless Keypad
Keypad Cover
Wireless Push Button with or without Key
Motor Cover
Photo Beam
Floor Track Wheel
Floor Track (3m)
Top Roller Guide
Gate Catcher
Gate Stopper
Base Plates
Sliding Limit Switch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LETRON 24V SOLAR "SLIDING GATE" MOTOR KIT (REMOTE)

Single Tyne Ripper - Up To 35HP - Galvanized- "Little Rippa", Adjustable Leg.
Rippers are a useful for around the farm, the single tine ripper can be used for preparing soil for crops or lawns.. The ripper can also be attached with the pipe layer attachment.
Adjustable leg model:
- Suits compact tractors Cat 0 and 1
- Depth 500-700mm
- Leg 100mm x 25
- Reversible point 300mm x 75mm x 15mm
- Weight: 42kg
Optional Pipe Layer attachment (Weight 10kg) takes 1 poly pipe
Note- Max digging depth assumes linkage can be lowered to the ground
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN "LITTLE RIPPA" SINGLE TYNE RIPPER UP TO 35HP - GALVANIZED- ADJ LEG - 85005DC

PTO Tube.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO TUBE - TRIANGLE PROFILE, 3M LENGTH (12503)

Broad acre ACM Series Mulcher
400cm cutting length
Built for large area crop residue mulching such as cotton, maize, rice, wheat and potato haulms.
Typical Applications
* Cotton Plants,
* Cereal Crop Stubble and vegetable remains.

Features:
- European gearbox C/W overrun clutch
- 261 HP - ACM 400, 328 HP - ACM 600,800& 900
- 2 x HD internal mulching bars
- Cat 3 & Cat 4 Narrow Clevis hitch 3 PL
- Sliding Top Hitch Point to follow undulations
- 9 series European outer PTO shafts
- 10 series European main PTO shaft
- Y blades pivot on hardened steel bushes
- 325 diameter rotor tube
- Eight row blade configuration
- High blade tip speed for optimum mulch
- Opening rear shields
- Height adjustable rear wheels standard -2 x ACM/400 (Hydraulic wheels are optional)
- Automatic greasing system supplying
- 2 x rotor & 2 x jackshaft bearings -ACM/400
Options:
- ACM Drawbar kit includes 4 x hydraulic phased cylinders on rear wheels, and pin adjustable drawbar.
- ACM End tow kit includes 2 x hydraulic phased cylinders on 2 x tow wheels, and pin adjustable drawbar.
- ACM Hydraulic rear wheel kit includes 4 x rephasing cylinders and all hosing in lieu of manual ratchet rams.
- ACM 360 degree castor rear wheels, add per wheel assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM BROADACRE MULCHER ACM SERIES 400CM (261HP) - ACM/400

Top Link Pin - Dual category.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK PIN - DUAL CATEGORY (CAT 1/2) (19-25MM PIN DIA, 175MM OVERALL LENGTH)

Find Farm Machinery For Sale. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SHAKTI 750W (1" X 1" BSP) PERIPHERAL PUMP WITH LEAD KIT

GENTECH 8.5 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

SPAREX COULTER DISC 18" (4 HOLES) - FISKARS

SPAREX PTO OVER-RUNNING CLUTCH (U/J SIZE: 30, 2 X 79, 4MM) - CLOCKWISE

MUTHING 160CM MULCHER WITH HYDRAULIC DRIVE - SUITS 45-70LPM - MU-FM160

SPAREX COUPLING WITH HOSE END - MALE 6"

SPAREX PTO SHAFT - 1,310MM LZ LENGTH, 1 3/8" X 6 SPLINE Q.R. 1 3/8" X 6 SPLINE Q.R.

LETRON 24V SOLAR "SLIDING GATE" MOTOR KIT (REMOTE)

DAKEN "LITTLE RIPPA" SINGLE TYNE RIPPER UP TO 35HP - GALVANIZED- ADJ LEG - 85005DC

SPAREX PTO TUBE - TRIANGLE PROFILE, 3M LENGTH (12503)

AGRIFARM BROADACRE MULCHER ACM SERIES 400CM (261HP) - ACM/400

SPAREX TOP LINK PIN - DUAL CATEGORY (CAT 1/2) (19-25MM PIN DIA, 175MM OVERALL LENGTH)

Farm Supplies Machinery & Equipment

Dealer Address